30 Apr, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
04 Sep, 2018
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
17 Aug, 2018
1 commit
-
We have the following cases:
- CONFIG_NR_DRAM_BANKS was defined, migrate normally
- CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
- CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
2), set this to 8.Signed-off-by: Tom Rini
24 Jun, 2018
1 commit
-
The default vesa mode was changed since commit 55b4e1b7d999
("x86: Change default FRAMEBUFFER_VESA_MODE of some boards") for
better VxWorks compatibility but with the changes QEMU video console
no longer works. This is because QEMU's vgabios implements the VESA
mode 8:8:8 as 24bpp without an alpha channel, which U-Boot's video
console driver currently does not support yet.We need change to real 32bpp in order to make it work again. QEMU
vgabios implements the custom 32bpp VESA mode starting from 0x140
(320x200x32) to 0x147 (1600x1200x32). Set it to 0x144 (1024x768x32).Fixes: 55b4e1b7d999 ("x86: Change default FRAMEBUFFER_VESA_MODE of some boards")
Signed-off-by: Bin Meng
Reviewed-by: Simon Glass
28 Apr, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_SPIThis partly involves updating code that assumes that CONFIG_SPI implies
things that are specific to the MPC8xx SPI driver. For now, just update
the CONFIG tests. This also involves reworking the default for
CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a
reasonable default, as it does not cause any compile failures.Signed-off-by: Adam Ford
Signed-off-by: Tom Rini
17 Apr, 2018
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
16 Apr, 2018
1 commit
-
This changes some boards' default FRAMEBUFFER_VESA_MODE to use 32-bit
pixel format for better VxWorks compatibility.Signed-off-by: Bin Meng
Reviewed-by: Simon Glass
09 Apr, 2018
2 commits
-
Migrate the CONFIG_DISPLAY_BOARDINFO_LATE option to Kconfig.
Signed-off-by: Mario Six
[trini: Re-run migration]
Signed-off-by: Tom Rini -
Migrate the CONFIG_LAST_STAGE_INIT option to Kconfig.
Signed-off-by: Mario Six
24 Feb, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_BOOTP_BOOTPATH
CONFIG_BOOTP_DNS
CONFIG_BOOTP_GATEWAY
CONFIG_BOOTP_HOSTNAME
CONFIG_BOOTP_PXE
CONFIG_BOOTP_SUBNETMASK
CONFIG_CMDLINE_EDITING
CONFIG_AUTO_COMPLETE
CONFIG_SYS_LONGHELP
CONFIG_SUPPORT_RAW_INITRD
CONFIG_ENV_VARS_UBOOT_CONFIGSigned-off-by: Adam Ford
[trini: Re-run the migration]
Signed-off-by: Tom Rini
11 Feb, 2018
1 commit
-
On the NIOS2 and Xtensa architectures, we do not have
CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
values into the defconfig and removing them from the headers.I did not attempt to add more default values in and for now will leave
that to maintainers.Signed-off-by: Tom Rini
19 Oct, 2017
1 commit
-
Up to now we depended on an exported variable to build u-boot.rom.
We should be able to specify it in the configuration file, too.With this patch this becomes possible using the new Kconfig option
CONFIG_BUILD_ROM.This option depends on CONFIG_X86 and is selected in
qemu-x86_defconfig and qemu-x86_64_defconfig.Cc: Simon Glass
Cc: Bin Meng
Signed-off-by: Heinrich Schuchardt
Reviewed-by: Bin Meng
17 Oct, 2017
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
13 Oct, 2017
1 commit
-
Patch queue for efi - 2017-10-13
This is the second batch of amazing improvements for efi_loader in 2017.11:
- New self tests to verify our own code
- A few bug fixes
- colored text support
- event and SNP improvements, should get us close to iPXE working
11 Oct, 2017
1 commit
-
Having this as a 'default y' is rather annoying because it doesn't
actually compile unless other options are defined in the board header:../cmd/bootm.c: In function 'do_imls_nor':
../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {Make it 'default n' so people who develop new boards that start from a
blank defconfig have one less compilation failure to debug.Signed-off-by: Tuomas Tynkkynen
05 Oct, 2017
1 commit
-
The EFI selftest has been broken by a patch on efi-next.
We should enable CONFIG_CMD_BOOTEFI_SELFTEST on
qemu-x86_defconfig and qemu-x86_64_defconfig by default
to catch this type of problem in the Travis CI tests.These systems typically have abundant memory so that
enabling this option should not pose a problem.Signed-off-by: Heinrich Schuchardt
Reviewed-by: Simon Glass
Signed-off-by: Alexander Graf
24 Aug, 2017
1 commit
-
Let's imply the 'pci' command to access the de facto interconnect
bus in an x86 system.Signed-off-by: Bin Meng
Reviewed-by: Stefan Roese
15 Aug, 2017
2 commits
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
-
Also introduce CONFIG_USE_BOOTARGS option so we can control if
CONFIG_BOOTARGS defined at all.Signed-off-by: Sam Protsenko
[trini: Resync r8a779[56]_ulcb, various ls10xx targets]
Signed-off-by: Tom Rini
14 Aug, 2017
1 commit
-
QEMU supports NVMe emulation. Enable the NVMe driver on QEMU x86.
Signed-off-by: Bin Meng
Reviewed-by: Tom Rini
12 Aug, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_CMD_PCISigned-off-by: Simon Glass
Reviewed-by: Bin Meng
Reviewed-by: Philipp Tomsich
01 Aug, 2017
8 commits
-
QEMU does not support ICH SPI controller yet. It's meaningless to
include SPI flash support.Signed-off-by: Bin Meng
Reviewed-by: Simon Glass -
Imply Qemu-specific drivers in the platform Kconfig.
Signed-off-by: Bin Meng
Reviewed-by: Simon Glass -
Now that all x86 boards have been converted to use DM, we can imply
these uclass drivers (DM_ETH, DM_RTC, DM_USB, DM_VIDEO) from the
top level.Previously DM_GPIO, DM_KEYBOARD, DM_SERIAL, DM_SPI, DM_SPI_FLASH
are selected. Change to use 'imply' to allow them to be removed.Note with this change, chromebook_link64 build fails:
common/built-in.o:(.data.env_htab+0xc): undefined reference to 'env_flags_validate'
lib/built-in.o: In function `hsearch_r':
lib/hashtable.c:380: undefined reference to 'env_callback_init'
lib/hashtable.c:382: undefined reference to 'env_flags_init'
make[1]: *** [spl/u-boot-spl] Error 1CONFIG_SPL_ENV_SUPPORT is required for chromebook_link64 to build
again. This is just a workaround as it is not needed at all. See
commit bda40d5 "x86: qemu: Add a config for 64-bit U-Boot" for
the same issue seen on QEMU 64-bit target.Signed-off-by: Bin Meng
Reviewed-by: Andy Shevchenko
Reviewed-by: Simon Glass -
This is a must have for all x86 boards.
Signed-off-by: Bin Meng
Reviewed-by: Andy Shevchenko
Reviewed-by: Simon Glass -
CONFIG_BOARD_EARLY_INIT_F literally indicates board-specific codes
and should be not 'default y' for all x86 boards.Signed-off-by: Bin Meng
Reviewed-by: Andy Shevchenko
Reviewed-by: Simon Glass -
PCI is the de facto interconnect bus in an x86 system.
Signed-off-by: Bin Meng
Reviewed-by: Andy Shevchenko
Reviewed-by: Simon Glass -
x86 is using the built-in libgcc implementation and this cannot be
turned off.Signed-off-by: Bin Meng
Reviewed-by: Andy Shevchenko
Reviewed-by: Simon Glass -
Without a timer, U-Boot just doesn't boot. This is not something
we can turn off.Signed-off-by: Bin Meng
Reviewed-by: Andy Shevchenko
Reviewed-by: Simon Glass
30 Jul, 2017
1 commit
-
Kbuild complains if USB is not selected before any of host driver.
warning: (X86) selects USB_EHCI_HCD which has unmet direct dependencies (USB)
warning: (X86) selects USB_EHCI_HCD which has unmet direct dependencies (USB)Select it for X86.
Fixes: 64d6ac5bc4a9 ("Kconfig: USB: Migrate CONFIG_USB_EHCI_HCD users to Kconfig")
Signed-off-by: Andy Shevchenko
[bmeng: Update all x86 boards' defconfig files to remove CONFIG_USB]
Signed-off-by: Bin Meng
26 Jul, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_ENV_IS_IN_MMC
CONFIG_ENV_IS_IN_NAND
CONFIG_ENV_IS_IN_UBI
CONFIG_ENV_IS_NOWHEREIn fact this already exists for sunxi as a 'choice' config. However not
all the choices are available in Kconfig yet so we cannot use that. It
would lead to more than one option being set.In addition, one purpose of this series is to allow the environment to be
stored in more than one place. So the existing choice is converted to a
normal config allowing each option to be set independently.There are not many opportunities for Kconfig updates to reduce the size of
this patch. This was tested with./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC
And then manual updates. This is because for CHAIN_OF_TRUST boards they
can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
now.Signed-off-by: Simon Glass
Signed-off-by: Tom Rini
23 May, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_CMD_IDESigned-off-by: Simon Glass
28 Jan, 2017
4 commits
-
We convert CONFIG_PARTITION_UUIDS to Kconfig first. But in order to cleanly
update all of the config files we must also update CMD_PART and CMD_GPT to also
be in Kconfig in order to avoid complex logic elsewhere to update all of the
config files.Signed-off-by: Patrick Delaunay
Signed-off-by: Patrick Delaunay
Signed-off-by: Tom Rini -
Signed-off-by: Patrick Delaunay
Signed-off-by: Patrick Delaunay -
Signed-off-by: Patrick Delaunay
Signed-off-by: Patrick Delaunay -
Signed-off-by: Patrick Delaunay
Signed-off-by: Patrick Delaunay
26 Jan, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_BOARD_EARLY_INIT_FSigned-off-by: Simon Glass
30 Dec, 2016
1 commit
-
Generated by "tools/moveconfig -s".
This will make config moves easier.
Signed-off-by: Masahiro Yamada
24 Oct, 2016
2 commits
-
This converts the following to Kconfig:
CONFIG_USB_KEYBOARDSigned-off-by: Simon Glass
[trini: Fixup MPC86* configs]
Signed-off-by: Tom Rini -
This converts the following to Kconfig:
CONFIG_SYS_CONSOLE_INFO_QUIETSigned-off-by: Simon Glass
[trini: Make this default n, re-run the migration]
Signed-off-by: Tom Rini