16 Jan, 2019
1 commit
-
Based on the following Linux commits:
- 54a702f70589 ("kbuild: mark $(targets) as .SECONDARY and remove
.PRECIOUS markers")- 8e9b61b293d9 ("kbuild: move .SECONDARY special target to
Kbuild.include")GNU Make automatically deletes intermediate files that are updated
in a chain of pattern rules.Example 1) %.dtb.o
07 May, 2018
1 commit
-
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.Signed-off-by: Tom Rini
28 Apr, 2018
1 commit
-
We have a large number of places where while we historically referenced
gd in the code we no longer do, as well as cases where the code added
that line "just in case" during development and never dropped it.Signed-off-by: Tom Rini
08 Dec, 2017
1 commit
-
This does not appear to be used by any boards. Before introducing a new
log system, remove this old one.Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
16 Aug, 2017
1 commit
-
We are now using an env_ prefix for environment functions. Rename these
two functions for consistency. Also add function comments in common.h.Quite a few places use getenv() in a condition context, provoking a
warning from checkpatch. These are fixed up in this patch also.Suggested-by: Wolfgang Denk
Signed-off-by: Simon Glass
04 Jul, 2017
1 commit
-
There was for long time no activity in the 4xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 4xx,
so remove it.Signed-off-by: Heiko Schocher
23 Jun, 2017
1 commit
-
The variable syndrome_codes is only used when DEBUG is define, add #if
guards around it in the same style as the rest of the file.Cc: Stefan Roese
Signed-off-by: Tom Rini
Reviewed-by: Stefan Roese
16 Jun, 2017
1 commit
-
There was for long time no activity in the mpx5xxx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in mpc5xxx,
so remove it.Signed-off-by: Heiko Schocher
12 Jun, 2017
2 commits
-
There was for long time no activity in the 8260 area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 8260,
so remove it.Signed-off-by: Heiko Schocher
-
There was for long time no activity in the 8xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 8xx,
so remove it (with a heavy heart, knowing that I remove
here the root of U-Boot).Signed-off-by: Heiko Schocher
06 Apr, 2017
1 commit
-
The architecture is currently unmaintained, remove.
Cc: Benjamin Matthews
Cc: Chong Huang
Cc: Dimitar Penev
Cc: Haitao Zhang
Cc: I-SYST Micromodule
Cc: M.Hasewinkel (MHA)
Cc: Marek Vasut
Cc: Martin Strubel
Cc: Peter Meerwald
Cc: Sonic Zhang
Cc: Valentin Yakovenkov
Cc: Wojtek Skulski
Cc: Wojtek Skulski
Signed-off-by: Tom Rini
26 Jan, 2017
1 commit
-
This is not defined anywhere in U-Boot. Drop this dead code.
Signed-off-by: Simon Glass
05 Dec, 2016
1 commit
-
Change 'date' to 'data'.
Signed-off-by: Tomas Melin
16 Jul, 2016
1 commit
-
Fix a number of typos, including:
* "compatble" -> "compatible"
* "eanbeld" -> "enabled"
* "envrionment" -> "environment"
* "FTD" -> "FDT" (for "flattened device tree")
* "ommitted" -> "omitted"
* "overriden" -> "overridden"
* "partiton" -> "partition"
* "propogate" -> "propagate"
* "resourse" -> "resource"
* "rest in piece" -> "rest in peace"
* "suport" -> "support"
* "varible" -> "variable"Signed-off-by: Robert P. J. Day
02 Apr, 2016
3 commits
-
Given that README.scrapyard shows scrapping of netta boards:
netta2 powerpc mpc8xx c51c1c9a 2014-07-07
netta powerpc mpc8xx c51c1c9a 2014-07-07delete netta example from POST tests.
Signed-off-by: Robert P. J. Day
-
Since POST_ALWAYS is defined as:
#define POST_ALWAYS (POST_NORMAL | \
POST_SLOWTEST | \
POST_MANUAL | \
POST_POWERON )there is no need to redundantly bitmask it with POST_MANUAL.
Signed-off-by: Robert P. J. Day
-
POST support for sample lwmon board was removed in commit e5d3078622.
Signed-off-by: Robert P. J. Day B
23 Mar, 2016
1 commit
-
Signed-off-by: Vagrant Cascadian
Acked-by: Marek Vasut
Reviewed-by: Simon Glass
Reviewed-by: Tom Rini
06 Dec, 2015
1 commit
-
Commit acc2372d "mpc8xx: remove lwmon board support" removed support
for the MPC823 based "lwmon" board, but left some board specific POST
files. This patch cleans up and removes the now unused files.Signed-off-by: Wolfgang Denk
06 May, 2015
2 commits
-
Most callers unpack the structure and pass each member. It seems better to
pass the whole structure instead, as with the C library. Also add an rtc_
prefix.Signed-off-by: Simon Glass
Acked-by: Heiko Schocher -
Rename this function so that it is clear that it is provided by the RTC.
Also return an error when it cannot function as expected. This is unlikely
to occur since it works for dates since 1752 and many RTCs do not support
such old dates. Still it is better to be accurate.Signed-off-by: Simon Glass
Acked-by: Heiko Schocher
19 Apr, 2015
1 commit
-
Update the naming convention used in the network stack functions and
variables that Ethernet drivers use to interact with it.This cleans up the temporary hacks that were added to this interface
along with the DM support.This patch has a few remaining checkpatch.pl failures that would be out
of the scope of this patch to fix (drivers that are in gross violation
of checkpatch.pl).Signed-off-by: Joe Hershberger
Acked-by: Simon Glass
06 Jan, 2015
1 commit
-
All the MPC824X boards are still non-generic boards:
A3000, CPC45, CU824, eXalion, MVBLUE, MUSENKI, Sandpoint824x, utx8245Signed-off-by: Masahiro Yamada
Cc: Wolfgang Denk
Cc: Josef Wagner
Cc: Torsten Demke
Cc: Jim Thompson
Cc: Greg Allen
25 Oct, 2014
1 commit
-
Signed-off-by: Jeroen Hofstee
08 Jul, 2014
2 commits
-
These boards are old enough and have no maintainers.
Signed-off-by: Masahiro Yamada
-
These boards are old enough and have no maintainers.
Signed-off-by: Masahiro Yamada
18 Apr, 2014
2 commits
-
Enough time has passed since these boards were moved to Orphan. Remove.
- Remove board/RPXlite/*
- Remove board/RPXClassic/*
- Remove include/configs/RPXlite.h
- Remove include/configs/RPXClassic.h
- Clean-up defined(CONFIG_RPXCLASSIC)
- Move the entry from boards.cfg to doc/README.scrapyardSigned-off-by: Masahiro Yamada
-
Enough time has passed since these boards were moved to Orphan. Remove.
- Remove board/mbx8xx/*
- Remove include/configs/{MBX.h,MBX860T.h}
- Clean-up if defined(CONFIG_MBX)
- Move the entries from boards.cfg to doc/README.scrapyardSigned-off-by: Masahiro Yamada
04 Mar, 2014
1 commit
-
$(call if_changed,...) must take FORCE as a prerequite.
Signed-off-by: Masahiro Yamada
Acked-by: Simon Glass
20 Feb, 2014
3 commits
-
Now we are ready to switch over to real Kbuild.
This commit disables temporary scripts:
scripts/{Makefile.build.tmp, Makefile.host.tmp}
and enables real Kbuild scripts:
scripts/{Makefile.build,Makefile.host,Makefile.lib}.This switch is triggered by the line in scripts/Kbuild.include
-build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build.tmp obj
+build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build objWe need to adjust some build scripts for U-Boot.
But smaller amount of modification is preferable.Additionally, we need to fix compiler flags which are
locally added or removed.In Kbuild, it is not allowed to change CFLAGS locally.
Instead, ccflags-y, asflags-y, cppflags-y,
CFLAGS_$(basetarget).o, CFLAGS_REMOVE_$(basetarget).o
are prepared for that purpose.Signed-off-by: Masahiro Yamada
Tested-by: Gerhard Sittig -
This commit changes the working directory
where the build process occurs.Before this commit, build process occurred under the source
tree for both in-tree and out-of-tree build.That's why we needed to add $(obj) prefix to all generated
files in makefiles like follows:
$(obj)u-boot.bin: $(obj)u-bootHere, $(obj) is empty for in-tree build, whereas it points
to the output directory for out-of-tree build.And our old build system changes the current working directory
with "make -C " syntax when descending into the
sub-directories.On the other hand, Kbuild uses a different idea
to handle out-of-tree build and directory descending.The build process of Kbuild always occurs under the output tree.
When "O=dir/to/store/output/files" is given, the build system
changes the current working directory to that directory and
restarts the make.Kbuild uses "make -f $(srctree)/scripts/Makefile.build obj="
syntax for descending into sub-directories.
(We can write it like "make $(obj)=" with a shorthand.)
This means the current working directory is always the top
of the output directory.Signed-off-by: Masahiro Yamada
Tested-by: Gerhard Sittig -
This commit moves suffix rules from config.mk
to scripts/Makefile.build, which will allow us
to switch smoothly to real Kbuild.Note1:
post/lib_powerpc/fpu/Makefile has
its own rule to compile C sources.
We need to tweak it to keep the same behavior.Note2:
There are two file2 with the same name:
arch/arm/lib/crt0.S and eamples/api/crt0.S.
To keep the same build behavior,
examples/api/Makefile also has to be treaked.Signed-off-by: Masahiro Yamada
16 Dec, 2013
1 commit
-
Convert like follows:
CPU mpc83xx -> CONFIG_MPC83xx
CPU mpc85xx -> CONFIG_MPC85xx
CPU mpc86xx -> CONFIG_MPC86xx
CPU mpc5xxx -> CONFIG_MPC5xxx
CPU mpc8xx -> CONFIG_8xx
CPU mpc8260 -> CONFIG_8260
CPU ppc4xx -> CONFIG_4xx
CPU x86 -> CONFIG_X86
ARCH x86 -> CONFIG_X86
ARCH powerpc -> CONFIG_PPCSigned-off-by: Masahiro Yamada
13 Dec, 2013
1 commit
-
All objects under post/ directory are enabled by CONFIG_HAS_POST.
(post/tests.o is enabled by CONFIG_POST_STD_LIST.
But CONFIG_POST_STD_LIST depends on CONFIG_HAS_POST.)We can move CONFIG_HAS_POST switch to the top Makefile.
Signed-off-by: Masahiro Yamada
25 Nov, 2013
1 commit
-
Signed-off-by: Masahiro Yamada
01 Nov, 2013
1 commit
-
This commit also deletes post/rules.mk,
which in not necessary any more.Signed-off-by: Masahiro Yamada
15 Oct, 2013
1 commit
-
Signed-off-by: Wolfgang Denk
[trini: Drop changes for PEP 4 following python tools]
Signed-off-by: Tom Rini
20 Sep, 2013
1 commit
-
Fix various misspellings of things like "environment", "kernel",
"default" and "volatile", and throw in a couple grammar fixes.Signed-off-by: Robert P. J. Day
24 Jul, 2013
1 commit
-
Signed-off-by: Wolfgang Denk
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini
01 May, 2013
1 commit
-
Devices in CONFIG_SYS_POST_I2C_IGNORES list may be absent
and the rule is not to report I2C POST failure for devices
in this list. Currently this doesn't work since probing for
these devices isn't done and thus they are not marked as
successfully probed. Ignore optional devices when checking
for devices that didn't respond.Signed-off-by: Anatolij Gustschin
