Eric Lee / smarc-uboot

23 Jan, 2020

1 commit

05 Dec, 2019

2 commits

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

08 Nov, 2019

1 commit

26 Mar, 2019

1 commit

  • abe66b1b5   Convert CONFIG_ENV_SPI_* to Kconfig ... Browse Code »
    24

    This converts the following to Kconfig:
    CONFIG_ENV_SPI_BUS
    CONFIG_ENV_SPI_CS
    CONFIG_ENV_SPI_MAX_HZ
    CONFIG_ENV_SPI_MODE

    Most of time these value are not needed, CONFIG_SF_DEFAULT
    with same value is used, so I introduced CONFIG_USE_ENV_SPI_*
    to force the associated value for the environment.

    Signed-off-by: Patrick Delaunay

    Patrick Delaunay
     

07 Feb, 2019

1 commit

  • 6d8251783   configs: Don't use SPI_FLASH_BAR as default ... Browse Code »
    12

    Now that new SPI NOR layer uses stateless 4 byte opcodes by default,
    don't enable SPI_FLASH_BAR. For SPI controllers that cannot support
    4-byte addressing, (stm32_qspi.c, fsl_qspi.c, mtk_qspi.c, ich.c,
    renesas_rpc_spi.c) add an imply clause to enable SPI_FLASH_BAR so as to
    not break functionality.

    Signed-off-by: Vignesh R
    Tested-by: Simon Goldschmidt
    Tested-by: Stefan Roese
    Tested-by: Horatiu Vultur
    Reviewed-by: Jagan Teki
    Tested-by: Jagan Teki #zynq-microzed

    Vignesh R
     

04 Sep, 2018

1 commit

04 Jun, 2018

1 commit

28 Apr, 2018

1 commit

  • f1b1f7706   Convert CONFIG_SPI to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_SPI

    This partly involves updating code that assumes that CONFIG_SPI implies
    things that are specific to the MPC8xx SPI driver. For now, just update
    the CONFIG tests. This also involves reworking the default for
    CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a
    reasonable default, as it does not cause any compile failures.

    Signed-off-by: Adam Ford
    Signed-off-by: Tom Rini

    Adam Ford
     

09 Apr, 2018

1 commit

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

06 Feb, 2018

1 commit

  • a4fa81146   cmd: Make CONFIG_CMD_FPGA depend on CONFIG_FPGA ... Browse Code »

    cmd/Makefile has:

    ifdef CONFIG_FPGA
    obj-$(CONFIG_CMD_FPGA) += fpga.o
    endif

    which means that if CONFIG_FPGA is not set, CONFIG_CMD_FPGA silently
    does nothing. Let's remove that Makefile conditional and instead express
    this equivalent dependency in Kconfig, so a lot of redundant

    # CONFIG_CMD_FPGA is not set

    can be removed from board defconfigs that don't actually have an FPGA.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

06 Nov, 2017

1 commit

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

28 Aug, 2017

1 commit

15 Aug, 2017

2 commits

26 Jul, 2017

1 commit

25 Jul, 2017

1 commit

19 Jun, 2017

1 commit

23 May, 2017

1 commit

28 Apr, 2017

1 commit

  • 51c7f3480   pinctrl: Kconfig: sort pinctrl config options to prevent future clutter ... Browse Code »

    This originally started out as
    "pinctrl: Kconfig: reorder to keep Rockchip options together"
    and tried to keep the Rockchip-related config options together.

    However, we now rewrite all chip-specific driver selections to start
    with CONFIG_PINCTRL_ (with the inadvertent changes to related
    Makefiles) and sort those alphabetically. And as this already means
    touching most of the file, we also reformat the help text to not exceed
    80 characters (but make full use of those 80 characters).

    Signed-off-by: Philipp Tomsich
    Acked-by: Simon Glass

    Philipp Tomsich
     

28 Jan, 2017

1 commit

26 Jan, 2017

1 commit

12 Oct, 2016

1 commit

09 Sep, 2016

1 commit

10 Jun, 2016

1 commit

31 May, 2016

1 commit

21 May, 2016

1 commit