Eric Lee / smarc-uboot

23 Jan, 2020

1 commit

09 Jan, 2020

1 commit

05 Dec, 2019

2 commits

04 Dec, 2019

1 commit

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

23 Sep, 2019

1 commit

05 May, 2019

1 commit

  • 623de3f08   Convert CONFIG_SUPPORT_EMMC_BOOT to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_SUPPORT_EMMC_BOOT

    As requested by Michal Simek , these boards
    have no eMMC so CONFIG_SUPPORT_EMMC_BOOT has not been migrated:

    xilinx_zynqmp_zc1275_revB
    xilinx_zynqmp_zc1751_xm018_dc4
    xilinx_zynqmp_zc1751_xm019_dc5
    xilinx_zynqmp_zcu100_revC
    xilinx_zynqmp_zcu102_rev1_0
    xilinx_zynqmp_zcu102_revA
    xilinx_zynqmp_zcu102_revB
    xilinx_zynqmp_zcu104_revA
    xilinx_zynqmp_zcu104_revC
    xilinx_zynqmp_zcu106_revA
    xilinx_zynqmp_zcu111_revA

    Signed-off-by: Alex Kiernan
    Acked-by: Lukasz Majewski
    Acked-by: Patrick Delaunay
    Acked-by: Ramon Fried
    Reviewed-by: Andy Shevchenko
    Tested-by: Sébastien Szymanski

    Alex Kiernan
     

30 Apr, 2019

2 commits

23 Feb, 2019

1 commit

08 Jan, 2019

1 commit

29 Dec, 2018

2 commits

14 Nov, 2018

1 commit

  • cbabe7f87   configs: Migrate and re-enabled CONFIG_CMD_MTDPARTS ... Browse Code »

    Now that CMD_UBI does not select CMD_MTDPARTS we need to make platforms
    that had been enabling it turn it on by hand. This exposed that we had
    not yet migrated CMD_MTDPARTS fully, so do so now.

    Fixes: 86dfa556d927 ("cmd: ubi: Remove useless call to mtdparts_init()")
    Signed-off-by: Tom Rini

    Tom Rini
     

20 Oct, 2018

1 commit

11 Sep, 2018

1 commit

04 Sep, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

08 Aug, 2018

1 commit

25 Jul, 2018

1 commit

23 Jul, 2018

1 commit

23 Jun, 2018

1 commit

  • b0e8bb4d0   ARM: uniphier: enable CONFIG_SNI_AVE and disable CONFIG_SMC911X ... Browse Code »

    Enable the on-chip ethernet driver for uniphier_{v7,v8}_defconfig.
    Disable the on-board SMC911x because it has not migrated to the
    driver model yet - it is not possible to enable DM and non-DM
    drivers at the same time.

    The CONFIG_SMC911X for uniphier_ld4_sld8_defconfig is still kept
    because the on-chip ethernet driver for LD4, sLD8 is not supported
    yet.

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

04 Jun, 2018

1 commit

08 Apr, 2018

1 commit

24 Feb, 2018

1 commit

  • d021e9421   Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_BOOTP_BOOTPATH
    CONFIG_BOOTP_DNS
    CONFIG_BOOTP_GATEWAY
    CONFIG_BOOTP_HOSTNAME
    CONFIG_BOOTP_PXE
    CONFIG_BOOTP_SUBNETMASK
    CONFIG_CMDLINE_EDITING
    CONFIG_AUTO_COMPLETE
    CONFIG_SYS_LONGHELP
    CONFIG_SUPPORT_RAW_INITRD
    CONFIG_ENV_VARS_UBOOT_CONFIG

    Signed-off-by: Adam Ford
    [trini: Re-run the migration]
    Signed-off-by: Tom Rini

    Adam Ford
     

06 Feb, 2018

1 commit

  • a4fa81146   cmd: Make CONFIG_CMD_FPGA depend on CONFIG_FPGA ... Browse Code »

    cmd/Makefile has:

    ifdef CONFIG_FPGA
    obj-$(CONFIG_CMD_FPGA) += fpga.o
    endif

    which means that if CONFIG_FPGA is not set, CONFIG_CMD_FPGA silently
    does nothing. Let's remove that Makefile conditional and instead express
    this equivalent dependency in Kconfig, so a lot of redundant

    # CONFIG_CMD_FPGA is not set

    can be removed from board defconfigs that don't actually have an FPGA.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

27 Dec, 2017

1 commit

19 Dec, 2017

1 commit

28 Nov, 2017

1 commit

23 Oct, 2017

1 commit

21 Oct, 2017

1 commit

  • 8daec2d9d   net: Add SMC911X driver to Kconfig, convert ... Browse Code »

    We add the various SMC91XX symbols to drivers/net/Kconfig and then this
    converts the following to Kconfig:
    CONFIG_SMC911X
    CONFIG_SMC911X_BASE
    CONFIG_SMC911X_16_BIT
    CONFIG_SMC911X_32_BIT

    Signed-off-by: Adam Ford
    [trini: Apply to the rest of the tree, re-squash old and new patch]
    Signed-off-by: Tom Rini

    Adam Ford
     

17 Oct, 2017

1 commit

15 Oct, 2017

1 commit

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

18 Sep, 2017

1 commit