13 Jun, 2018
1 commit
-
Add the fsl CAAM driver and new commands to implement DEK blob operations,
like "caam genblob" to generate encrypted blob and "caam decap" to output
orignal plain data.Signed-off-by: Ye Li
23 May, 2018
2 commits
-
This patch enable blob command for mScale platforms.
Signed-off-by: Aymen Sghaier
(cherry picked from commit 895669394f6aae633abf6ea3f327d6093562edde) -
Signed-off-by: Franck LENORMAND
(cherry picked from commit 03cb71cd22ff6ab1e2005a4bcb183c65f49b6e4e)
27 Apr, 2018
1 commit
-
In order to build CMD_BLOB on i.MX CAAM supported devices it's
necessary to select SECURE_BOOT. Add SECURE_BOOT and CAAM supported
SoCs as dependency.Signed-off-by: Breno Lima
Reviewed-by: Ye Li
(cherry picked from commit 4afb519038d190687cac6d410e9ad65d0655f1c0)
28 Feb, 2018
1 commit
-
Enable networking command only when NET is enabled.
And remove selecting NET for CMD_NETSigned-off-by: Michal Simek
Signed-off-by: Tom Rini
24 Feb, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_BOOTP_BOOTPATH
CONFIG_BOOTP_DNS
CONFIG_BOOTP_GATEWAY
CONFIG_BOOTP_HOSTNAME
CONFIG_BOOTP_PXE
CONFIG_BOOTP_SUBNETMASK
CONFIG_CMDLINE_EDITING
CONFIG_AUTO_COMPLETE
CONFIG_SYS_LONGHELP
CONFIG_SUPPORT_RAW_INITRD
CONFIG_ENV_VARS_UBOOT_CONFIGSigned-off-by: Adam Ford
[trini: Re-run the migration]
Signed-off-by: Tom Rini
22 Feb, 2018
1 commit
-
Clean up the screaming mess of configuration options that DFU is.
It was impossible to configure DFU such that TFTP is enabled and
USB is not, this patch fixes that and assures that DFU TFTP and
DFU USB can be enabled separatelly and that the correct pieces
of code are compiled in.Signed-off-by: Marek Vasut
Cc: Lukasz Majewski
15 Feb, 2018
1 commit
-
Configuration option CMD_SCSI should be placed in the same submenu as
CMD_SATA and CMD_MMC.Signed-off-by: Heinrich Schuchardt
14 Feb, 2018
1 commit
-
Convert the CONFIG_CMD_FITUPD symbol to Kconfig.
Signed-off-by: Marek Vasut
Cc: Tom Rini
09 Feb, 2018
2 commits
-
config_fallbacks.h has some logic that sets HAVE_BLOCK_DEVICE
based on a list of enabled options. Moving HAVE_BLOCK_DEVICE to
Kconfig allows us to drastically shrink the logic in
config_fallbacks.hSigned-off-by: Adam Ford
[trini: Rename HAVE_BLOCK_DEVICE to CONFIG_BLOCK_DEVICE]
Signed-off-by: Tom Rini -
config_fallback.h has some logic that checks a variety of options
and selects LIB_UUID if it hasn't already been selected. This
will all LIB_UUID in Kconfig and select this option for the list
of options to allow us to remove the logic from fallbacksSigned-off-by: Adam Ford
06 Feb, 2018
1 commit
-
cmd/Makefile has:
ifdef CONFIG_FPGA
obj-$(CONFIG_CMD_FPGA) += fpga.o
endifwhich means that if CONFIG_FPGA is not set, CONFIG_CMD_FPGA silently
does nothing. Let's remove that Makefile conditional and instead express
this equivalent dependency in Kconfig, so a lot of redundant# CONFIG_CMD_FPGA is not set
can be removed from board defconfigs that don't actually have an FPGA.
Signed-off-by: Tuomas Tynkkynen
02 Feb, 2018
1 commit
-
The CONFIG_USB_FUNCTION_MASS_STORAGE must be selected when one enables
support for ums command.Signed-off-by: Lukasz Majewski
Reviewed-by: Jaehoon Chung
27 Jan, 2018
1 commit
26 Jan, 2018
5 commits
-
The sunXi arm64 build has overflown, leading to the main U-boot binary
overwriting the environment when flashing the new image, or even worse,
overwriting itself when we're calling saveenv.Disable this command that is not critical until we can adress the issue
properly.Reviewed-by: Andre Przywara
Signed-off-by: Maxime Ripard
Reviewed-by: Jagan Teki -
The sunXi arm64 build has overflown, leading to the main U-boot binary
overwriting the environment when flashing the new image, or even worse,
overwriting itself when we're calling saveenv.Disable this command that is not critical until we can adress the issue
properly.Signed-off-by: Maxime Ripard
Reviewed-by: Jagan Teki -
The sunXi arm64 build has overflown, leading to the main U-boot binary
overwriting the environment when flashing the new image, or even worse,
overwriting itself when we're calling saveenv.Disable this command that is not critical until we can adress the issue
properly.Signed-off-by: Maxime Ripard
Reviewed-by: Jagan Teki -
The sunXi arm64 build has overflown, leading to the main U-boot binary
overwriting the environment when flashing the new image, or even worse,
overwriting itself when we're calling saveenv.Disable this command that is not critical until we can adress the issue
properly.Signed-off-by: Maxime Ripard
Reviewed-by: Jagan Teki -
The sunXi arm64 build has overflown, leading to the main U-boot binary
overwriting the environment when flashing the new image, or even worse,
overwriting itself when we're calling saveenv.Disable this command that is not critical until we can adress the issue
properly.Signed-off-by: Maxime Ripard
Reviewed-by: Jagan Teki
23 Jan, 2018
1 commit
-
Migrate the following symbols to Kconfig:
CONFIG_FS_EXT4
CONFIG_EXT4_WRITEThe definitions in config_fallbacks.h can now be expressed in Kconfig.
Signed-off-by: Tuomas Tynkkynen
20 Jan, 2018
1 commit
-
Move cmd_ddr3 to cmd/ti in order to make
it build for non-keystone TI platforms.Signed-off-by: Lokesh Vutla
[trini: Rename to ddr3.c not cmd_ddr3.c]
Signed-off-by: Tom Rini
10 Jan, 2018
1 commit
-
this patch add rockusb command. the usage is
rockusb
e.g. rockusb 0 mmc 0Signed-off-by: Eddie Cai
Reviewed-by: Simon Glass
08 Dec, 2017
2 commits
-
Add a command which exercises the logging system.
Signed-off-by: Simon Glass
-
Add a command for adjusting the log level.
Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
06 Nov, 2017
1 commit
-
We move all instances of CONFIG_MTDIDS_DEFAULT and
CONFIG_MTDPARTS_DEFAULT from the header files to the defconfig files.
There's a few cases here where we need to expand upon what was in the
header file.Tested-by: Adam Ford #omap3_logic
Signed-off-by: Tom Rini
11 Oct, 2017
1 commit
-
Having this as a 'default y' is rather annoying because it doesn't
actually compile unless other options are defined in the board header:../cmd/bootm.c: In function 'do_imls_nor':
../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {Make it 'default n' so people who develop new boards that start from a
blank defconfig have one less compilation failure to debug.Signed-off-by: Tuomas Tynkkynen
09 Oct, 2017
2 commits
-
In the Linux Kernel on ARM64, the Image.COMPRESSION file is not
self-extracting in the way that x86 and ARM images are. So when
CMD_BOOTI is enabled we should also default to enabling CMD_UNZIP and
CONFIG_LZMA in order for the user to be able to decompress many of the
common compressions that will be done to an Image file.Signed-off-by: Tom Rini
-
On case-insensitive file systems we have collision between
scripts/kconfig/ directory and scripts/Kconfig file. This patch moves
scripts/Kcofnig contents to cmd/Kconfig to fix that.Signed-off-by: Sam Protsenko
Acked-by: Masahiro Yamada
04 Oct, 2017
1 commit
-
CONFIG_RANDOM_UUID is used by the GPT command to generate random UUID when
none are provided.Move that option to Kconfig.
Reviewed-by: Tom Rini
Reviewed-by: Jagan Teki
Signed-off-by: Maxime Ripard
03 Oct, 2017
1 commit
-
Signed-off-by: Marek Behun
create mode 100644 cmd/btrfs.c
19 Sep, 2017
1 commit
-
A testing framework for the EFI API is provided.
It can be executed with the 'bootefi selftest' command.It is coded in a way that at a later stage we may turn it
into a standalone EFI application. The current build system
does not allow this yet.All tests use a driver model and are run in three phases:
setup, execute, teardown.A test may be setup and executed at boottime,
it may be setup at boottime and executed at runtime,
or it may be setup and executed at runtime.After executing all tests the system is reset.
Signed-off-by: Heinrich Schuchardt
Signed-off-by: Alexander Graf
23 Aug, 2017
1 commit
-
Add a new command to start USB Serial Download Protocol (SDP)
state machine.Signed-off-by: Stefan Agner
Reviewed-by: Łukasz Majewski
Reviewed-by: Stefano Babic
14 Aug, 2017
1 commit
-
Add nvme commands in U-Boot command line.
1. "nvme scan" - scan NVMe blk devices
2. "nvme list" - show all available NVMe blk devices
3. "nvme info" - show current or a specific NVMe blk device
4. "nvme device" - show or set current device
5. "nvme part" - print partition table
6. "nvme read" - read data from NVMe blk device
7. "nvme write" - write data to NVMe blk deviceSigned-off-by: Zhikang Zhang
Signed-off-by: Wenbin Song
Signed-off-by: Bin Meng
Reviewed-by: Tom Rini
12 Aug, 2017
7 commits
-
Most of this is duplicated in Kconfig help. Add some of that which is not,
and remove the help from the README.Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
Reviewed-by: Philipp Tomsich -
This converts the following to Kconfig:
CONFIG_CMD_ZFSSigned-off-by: Simon Glass
Reviewed-by: Bin Meng
Reviewed-by: Philipp Tomsich -
This converts the following to Kconfig:
CONFIG_CMD_ZBOOTSigned-off-by: Simon Glass
Reviewed-by: Bin Meng
Reviewed-by: Philipp Tomsich -
This converts the following to Kconfig:
CONFIG_CMD_UUIDSigned-off-by: Simon Glass
Reviewed-by: Bin Meng
Reviewed-by: Philipp Tomsich -
This converts the following to Kconfig:
CONFIG_CMD_UNIVERSESince no board uses this, perhaps we should drop this command?
Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
Reviewed-by: Philipp Tomsich -
This converts the following to Kconfig:
CONFIG_CMD_TSI148Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
Reviewed-by: Philipp Tomsich -
This converts the following to Kconfig:
CONFIG_CMD_TRACESigned-off-by: Simon Glass
Reviewed-by: Bin Meng
Reviewed-by: Philipp Tomsich