24 Feb, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_BOOTP_BOOTPATH
CONFIG_BOOTP_DNS
CONFIG_BOOTP_GATEWAY
CONFIG_BOOTP_HOSTNAME
CONFIG_BOOTP_PXE
CONFIG_BOOTP_SUBNETMASK
CONFIG_CMDLINE_EDITING
CONFIG_AUTO_COMPLETE
CONFIG_SYS_LONGHELP
CONFIG_SUPPORT_RAW_INITRD
CONFIG_ENV_VARS_UBOOT_CONFIGSigned-off-by: Adam Ford
[trini: Re-run the migration]
Signed-off-by: Tom Rini
11 Oct, 2017
1 commit
-
Having this as a 'default y' is rather annoying because it doesn't
actually compile unless other options are defined in the board header:../cmd/bootm.c: In function 'do_imls_nor':
../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {Make it 'default n' so people who develop new boards that start from a
blank defconfig have one less compilation failure to debug.Signed-off-by: Tuomas Tynkkynen
16 Sep, 2017
1 commit
-
Enable this option for link so that the timer is available earlier.
Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
24 Aug, 2017
1 commit
-
Let's imply the 'pci' command to access the de facto interconnect
bus in an x86 system.Signed-off-by: Bin Meng
Reviewed-by: Stefan Roese
15 Aug, 2017
2 commits
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
-
Also introduce CONFIG_USE_BOOTARGS option so we can control if
CONFIG_BOOTARGS defined at all.Signed-off-by: Sam Protsenko
[trini: Resync r8a779[56]_ulcb, various ls10xx targets]
Signed-off-by: Tom Rini
13 Aug, 2017
1 commit
-
To fully support DM timer in SPL and TPL, we need a few things cleaned
up and normalised:
- inclusion of the uclass and drivers should be an all-or-nothing
decision for each stage and under control of $(SPL_TPL_)TIMER
instead of having the two-level configuration with TIMER and
$(SPL_TPL_)TIMER_SUPPORT
- when $(SPL_TPL_)TIMER is enabled, the ARMv8 generic timer code can
not be compiled inThis normalises configuration to $(SPL_TPL_)TIMER and moves the config
options to drivers/timer/Kconfig (and cleans up the collateral damage
to some defconfigs that had SPL_TIMER_SUPPORT enabled).Signed-off-by: Philipp Tomsich
Reviewed-by: Simon Glass
12 Aug, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_CMD_PCISigned-off-by: Simon Glass
Reviewed-by: Bin Meng
Reviewed-by: Philipp Tomsich
01 Aug, 2017
10 commits
-
After MMC is converted to DM, convert to use DM SCSI as well for all
x86 boards and imply BLK for both MMC and SCSI drivers.CONFIG_SCSI_DEV_LIST is no longer used. Clean them up.
Signed-off-by: Bin Meng
Reviewed-by: Simon Glass -
Only a specific type of SPI flash exists on a board, having board
Kconfig to select the SPI flash seems to make more sense. Other
flash types are not necessary except coreboot, which implies all
available flash drivers there.Signed-off-by: Bin Meng
Reviewed-by: Simon Glass -
Imply drivers that are working with Ivybridge platform in the
platform Kconfig.Signed-off-by: Bin Meng
Reviewed-by: Simon Glass -
Now that all x86 boards have been converted to use DM, we can imply
these uclass drivers (DM_ETH, DM_RTC, DM_USB, DM_VIDEO) from the
top level.Previously DM_GPIO, DM_KEYBOARD, DM_SERIAL, DM_SPI, DM_SPI_FLASH
are selected. Change to use 'imply' to allow them to be removed.Note with this change, chromebook_link64 build fails:
common/built-in.o:(.data.env_htab+0xc): undefined reference to 'env_flags_validate'
lib/built-in.o: In function `hsearch_r':
lib/hashtable.c:380: undefined reference to 'env_callback_init'
lib/hashtable.c:382: undefined reference to 'env_flags_init'
make[1]: *** [spl/u-boot-spl] Error 1CONFIG_SPL_ENV_SUPPORT is required for chromebook_link64 to build
again. This is just a workaround as it is not needed at all. See
commit bda40d5 "x86: qemu: Add a config for 64-bit U-Boot" for
the same issue seen on QEMU 64-bit target.Signed-off-by: Bin Meng
Reviewed-by: Andy Shevchenko
Reviewed-by: Simon Glass -
This is a must have for all x86 boards.
Signed-off-by: Bin Meng
Reviewed-by: Andy Shevchenko
Reviewed-by: Simon Glass -
Platform knows whether MRC cache is implemented, but using it can
be a choice of a specific board.Signed-off-by: Bin Meng
Reviewed-by: Simon Glass -
PCI is the de facto interconnect bus in an x86 system.
Signed-off-by: Bin Meng
Reviewed-by: Andy Shevchenko
Reviewed-by: Simon Glass -
x86 is using the built-in libgcc implementation and this cannot be
turned off.Signed-off-by: Bin Meng
Reviewed-by: Andy Shevchenko
Reviewed-by: Simon Glass -
Without a timer, U-Boot just doesn't boot. This is not something
we can turn off.Signed-off-by: Bin Meng
Reviewed-by: Andy Shevchenko
Reviewed-by: Simon Glass -
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
30 Jul, 2017
1 commit
-
Kbuild complains if USB is not selected before any of host driver.
warning: (X86) selects USB_EHCI_HCD which has unmet direct dependencies (USB)
warning: (X86) selects USB_EHCI_HCD which has unmet direct dependencies (USB)Select it for X86.
Fixes: 64d6ac5bc4a9 ("Kconfig: USB: Migrate CONFIG_USB_EHCI_HCD users to Kconfig")
Signed-off-by: Andy Shevchenko
[bmeng: Update all x86 boards' defconfig files to remove CONFIG_USB]
Signed-off-by: Bin Meng
26 Jul, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_ENV_IS_IN_SPI_FLASHSigned-off-by: Simon Glass
12 Jul, 2017
2 commits
-
As a demonstration of how to use SCSI with driver model, move link over
to use this. This patch needs more work, but illustrates the concept.Signed-off-by: Simon Glass
Reviewed-by: Bin Meng -
This converts the following to Kconfig:
CONFIG_SCSISigned-off-by: Simon Glass
Reviewed-by: Bin Meng
19 Jun, 2017
1 commit
-
Signed-off-by: Tom Rini
18 Apr, 2017
1 commit
-
Enable this command so we can get an approximate performance measurement.
Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
14 Mar, 2017
1 commit
-
Signed-off-by: Tom Rini
07 Feb, 2017
1 commit
-
Add a new board config which uses 64-bit U-Boot. This is not fully
functional but is it a start. Missing features:- SDRAM sizing
- Booting linux
- EFI support
- SCSI device init
(and others)Signed-off-by: Simon Glass
Reviewed-by: Bin Meng