17 Feb, 2017
1 commit
-
Commit 94084eea3bd3 ("tools: kwbimage: Fix dest addr") changed kwbimage
to do this adjustment. So now the adjustment in kwboot is not needed
(and would prevent UART booting for images generated by the new
kwbimage). Remove the destaddr adjustment in kwboot.Signed-off-by: Chris Packham
Signed-off-by: Stefan Roese
26 Aug, 2016
1 commit
-
Commit f4db6c976cf ("arm: mvebu: Add runtime detection of UART (xmodem)
boot-mode") added a change to hdr->destaddr when dynamically patching an
image for UART boot mode. With this change, kwboot ceases to work on
Kirkwood.Thus, let's change hdr->destaddr only when we are patching an image with
header version 1 (Orion and Kirkwood use header version 0).Signed-off-by: Simon Baatz
Fixes: f4db6c976cf ("arm: mvebu: Add runtime detection of UART (xmodem) boot-mode")
Cc: Stefan Roese
Cc: Luka Perkov
Cc: Kevin Smith
Signed-off-by: Stefan Roese
24 Mar, 2016
2 commits
-
Add command-line specification of xmodem timeout. If the binary
header needs to take a while to do something (e.g. DDR ECC
scrubbing), the xmodem transfer can time out. Add a configurable
xmodem block timeout to allow transfers with slow binary headers
to succeed.Signed-off-by: Kevin Smith
Cc: Stefan Roese
Signed-off-by: Stefan Roese -
Usage text was getting unwieldy and somewhat incorrect. The
usage summary implied that some options were mutually exclusive
(e.g. -q or -s). Clean up the summary to just include the
important ones, and include a generic "[OPTIONS]" instead.Signed-off-by: Kevin Smith
Cc: Stefan Roese
Signed-off-by: Stefan Roese
14 Jan, 2016
1 commit
-
This patch adds runtime detection of the Marvell UART boot-mode (xmodem
protocol). If this boot-mode is detected, SPL will return to the
BootROM to continue the UART booting.With this patch its now possible, to generate a U-Boot image that
can be booted either from the strapped boot-device (e.g. SPI NOR, MMC,
etc) or via the xmodem protocol from the UART. In the UART case,
the kwboot tool will dynamically insert the UART boot-device type
into the image. And also patch the load address in the header, so
that the mkimage header will be skipped (as its not expected by the
Marvell BootROM).This simplifies the development for Armada XP / 38x based boards.
As no special images need to be generated by selecting the
MVEBU_BOOTROM_UARTBOOT Kconfig option.Since the Kconfig option MVEBU_BOOTROM_UARTBOOT is not needed any
more, its now completely removed.Signed-off-by: Stefan Roese
Cc: Luka Perkov
Cc: Dirk Eibach
Cc: Phil Sutter
Cc: Kevin Smith
01 Oct, 2015
1 commit
-
Currently, kwboot only allows dynamic UART boot mode patching for SoCs
with header version 0 (Orion, Kirkwood). This patch now enables this "-p"
feature also for SoCs with header version 1 (Armada XP / 38x etc). With
this its possible now to use the UART boot mode without on images that
are generated for other boot devices, like SPI. So no need to change
BOOT_FROM to "uart" for UART xmodem booting any more.Signed-off-by: Stefan Roese
Tested-by: Kevin Smith
Cc: Luka Perkov
Cc: Dirk Eibach
14 Jun, 2015
1 commit
-
To support the Armada 38x, new values for the request-delay and the
response-timeout are needed. As the values already implemented in
this tool (for Kirkwood and Armada XP) don't seem to work here.
To make this more flexible, lets add make those 2 parameters
configurable via the cmdline. Here the new parameters:-q : use specific request-delay
-s : use specific response-timeoutFor the Marvell DB-88F6820 these values are known to work:
One board:
-q 2 -s 12nd board:
-q 5 -s 5So this seems to be even board specific. But with this patch now
those values can be specified and tested via the cmdline.Signed-off-by: Stefan Roese
Cc: Kevin Smith
Cc: Dirk Eibach
Cc: Luka Perkov
23 Oct, 2014
1 commit
-
The barebox version of the kwboot tool has evolved a bit. To support
Armada XP and Dove. Additionally a few minor fixes have been applied.
So lets sync with the latest barebox version.Please note that the main difference between both versions now is, that
the U-Boot version still supports the -p option, to dynamically patch
an image for UART boot mode. I didn't test it now though.Signed-off-by: Stefan Roese
Tested-by: Luka Perkov
07 Jul, 2012
1 commit
-
The kwboot program boots boards based on Marvell's Kirkwood platform
via Xmodem over their integrated UART.Signed-off-by: Daniel Stodden
Acked-by: Luka Perkov
Tested-By: Holger Brunck
Tested-By: David Purdy
Tested-by: Simon Guinot