Eric Lee / smarc-uboot

26 Mar, 2020

1 commit

  • 23cb61761   rockchip: Change keyboard input from CrOS EC keyboard to a USB keyboard ... Browse Code »

    These boards aren't ChromeOS devices so won't have a cros-ec-keyb
    input as it's the keyboard available via the ChromeOS Embedded
    Controller. Update them to use a USB keyboard which would actually
    be available. Also enable the usb keyboard option for those devices
    that don't have it enabled already.

    Signed-off-by: Peter Robinson
    Reviewed-by: Michael Trimarchi
    Reviewed-by: Simon Glass
    Reviewed-by: Kever Yang

    Peter Robinson
     

29 Feb, 2020

1 commit

19 Feb, 2020

1 commit

30 Jan, 2020

1 commit

23 Jan, 2020

1 commit

04 Dec, 2019

1 commit

24 Nov, 2019

1 commit

23 Nov, 2019

4 commits

  • a9af59a30   fastboot: rockchip: Select FASTBOOT_FLASH[_MMC_DEV] ... Browse Code »

    Select CONFIG_FASTBOOT_FLASH, CONFIG_FASTBOOT_FLASH_MMC_DEV
    for rockchip SoC plaforms in fastboot Kconfig file instead
    of defined it in board defconfig.

    This eventually drop the explicit configs defined in
    supporting board defconfig files.

    Tested-by: Levin Du
    Signed-off-by: Jagan Teki
    Reviewed-by: Kever Yang

    Jagan Teki
     
  • 132b012ed   gadget: rockchip: USB_GADGET_PRODUCT_NUM ... Browse Code »

    Rockchip support differnet or common gadget product number
    between Rockchip SoCs like,

    0x310a - rk3036
    0x320a - rk3229, rk3288
    0x330a - rk3328

    So, select them on Kconfig based on platform specific
    config defined.
       
    This eventually drop the explicit configs defined in
    supporting board defconfig files.

    Tested-by: Levin Du
    Signed-off-by: Jagan Teki
    Reviewed-by: Kever Yang

    Jagan Teki
     
  • 89cbceb38   gadget: Select USB_GADGET_VENDOR_NUM for rockchip ... Browse Code »

    Gadget vendor number, 0x2207 is common across all platfroms
    supported in Rockchip SoC.

    So, select the same number globally, if ARCH_ROCKCHIP.

    This eventually drop the explicit configs defined in supported
    board defconfig files.

    Tested-by: Levin Du
    Signed-off-by: Jagan Teki
    Reviewed-by: Kever Yang

    Jagan Teki
     
  • 89e311d49   gadget: Select USB_GADGET_MANUFACTURER for rockchip ... Browse Code »

    Select the gadget manufacturer as 'Rockchip' for
    all rockchip platform SoC's.

    This eventually drop the explicit defined added
    on supported board defconfig files.

    Tested-by: Levin Du
    Signed-off-by: Jagan Teki
    Reviewed-by: Kever Yang

    Jagan Teki
     

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

12 Nov, 2019

1 commit

08 Nov, 2019

1 commit

08 Oct, 2019

1 commit

  • b51882d00   spl: Convert CONFIG_SPL_SIZE_LIMIT to hex ... Browse Code »
    1

    This is currently a decimal value which is not as convenient or
    meaningful. Also U-Boot tends to use hex everywhere.

    Convert this option to hex and add a comment for the size_check macro.

    Signed-off-by: Simon Glass
    Reviewed-by: Simon Goldschmidt
    Acked-by: Bin Meng
    [bmeng: correct the typo in the commit title]
    Signed-off-by: Bin Meng

    Simon Glass
     

23 Sep, 2019

1 commit

19 Sep, 2019

3 commits

  • f810ea6ac   rockchip: rk3288-tinker: Attach missing peripherals at SPL ... Browse Code »

    Tinker board needs to mux all the sdmmc gpio and
    activate the regulator connected to bank 7. Remove
    all the bank that are not in use and mark them as dm,spl
    so-that it would initialize at SPL.

    Signed-off-by: Michael Trimarchi
    Signed-off-by: Jagan Teki
    Reviewed-by: Kever Yang

    Michael Trimarchi
     
  • 4bd143b57   configs: tinker: Enable SDRAM, SPL stack ... Browse Code »

    SPL sets up SDRAM while in its board_init_f()
    function, it is possible for the stack to move
    there before board_init_r() is reached.

    So it is required to reserve the stack for SDRAM,
    with a proper location and size otherwise any
    operations during SPL handoff would leads to failure.

    On, this particular context tinker-rk3288 SPL is
    failing to launch U-Boot proper on SDRAM due to
    lack of stack.

    U-Boot SPL 2019.10-rc3-00297-g5ba8b12543 (Sep 12 2019 - 08:50:36 +0530)
    Trying to boot from MMC1
    spl: mmc init failed with error: -110
    SPL: failed to boot from all boot devices
    ### ERROR ### Please RESET the board ###

    So, enable SPL_STACK_R_ADDR and it's related-config
    items for SDRAM, SPL stack to setup properly.

    Reported-by: Jagan Teki
    Signed-off-by: Jagan Teki
    Reviewed-by: Kever Yang

    Jagan Teki
     
  • 87d3fac2e   configs: tinker: Drop explicit SPL_TEXT ... Browse Code »

    SPL_TEXT_BASE is 0x0 by default, based on the kconfig
    definition move in below commit.

    "configs: move CONFIG_SPL_TEXT_BASE to Kconfig"
    (sha1: f89d6133eef2e068f9c33853b6584d7fcbfa9d2e)

    So, don't define it explicitly.

    Signed-off-by: Jagan Teki
    Reviewed-by: Kever Yang

    Jagan Teki
     

19 Aug, 2019

1 commit

02 Aug, 2019

1 commit

  • 37304aaf6   Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig ... Browse Code »
    4

    This converts the following to Kconfig:
    CONFIG_USE_PREBOOT
    CONFIG_PREBOOT

    Both are together in one commit, since otherwise the former causes kconfig
    to define the latter, which gives duplicate symbol errors.

    Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the
    backslash lands in the wrong place. Similarly with socfpga_vining_fpga.

    Signed-off-by: Simon Glass

    Simon Glass
     

20 Jul, 2019

2 commits

02 Jul, 2019

1 commit

21 Jun, 2019

1 commit

11 Jun, 2019

1 commit

07 Jun, 2019

1 commit

30 Apr, 2019

2 commits

26 Mar, 2019

1 commit

  • 14453fbfa   Convert CONFIG_SF_DEFAULT_* to Kconfig ... Browse Code »
    36

    This converts the following to Kconfig:
    CONFIG_SF_DEFAULT_BUS
    CONFIG_SF_DEFAULT_CS
    CONFIG_SF_DEFAULT_MODE
    CONFIG_SF_DEFAULT_SPEED

    I use moveconfig script and then manual check on generated u-boot.cfg
    to solve the remaining issue.

    Signed-off-by: Patrick Delaunay

    Patrick Delaunay
     

07 Feb, 2019

1 commit

01 Feb, 2019

1 commit

08 Jan, 2019

1 commit

04 Sep, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

21 Jul, 2018

1 commit

  • a2a5053a1   rockchip: utilize CONFIG_DEFAULT_FDT_FILE ... Browse Code »

    Currently the fdtfile environment variable is set to
    CONFIG_DEFAULT_DEVICE_TREE which is іnternally used as U-Boot devicetree
    source. The OS can use a different filename and Kconfig gives us the
    ability to select a default devicetree via CONFIG_DEFAULT_FDT_FILE.
    This also gives user configuring U-Boot via menuconfig the behaviour
    someone would expect.

    Signed-off-by: Klaus Goger
    Tested-By: Vagrant Cascadian
    Reviewed-by: Philipp Tomsich
    Acked-by: Philipp Tomsich

    Klaus Goger
     

04 Jun, 2018

1 commit

30 May, 2018

1 commit

26 Apr, 2018

1 commit