Eric Lee / smarc-uboot

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

06 Feb, 2018

1 commit

  • a4fa81146   cmd: Make CONFIG_CMD_FPGA depend on CONFIG_FPGA ... Browse Code »

    cmd/Makefile has:

    ifdef CONFIG_FPGA
    obj-$(CONFIG_CMD_FPGA) += fpga.o
    endif

    which means that if CONFIG_FPGA is not set, CONFIG_CMD_FPGA silently
    does nothing. Let's remove that Makefile conditional and instead express
    this equivalent dependency in Kconfig, so a lot of redundant

    # CONFIG_CMD_FPGA is not set

    can be removed from board defconfigs that don't actually have an FPGA.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

05 Oct, 2017

1 commit

  • 6a3e65dea   common: Drop LOGLEVEL to 4 ... Browse Code »

    While this came in with a default value of 6 I am lowering this to 4.
    The MTD/UBI code has a large number of error messages that we include
    now. In addition, "normally" warning messages are not included so this
    feels like a more natural level to have.

    Signed-off-by: Tom Rini

    Tom Rini
     

04 Oct, 2017

1 commit

  • b44b30260   printk: collect printk stuff into <linux/printk.h> with loglevel support ... Browse Code »

    When we import code from Linux, with regular re-sync planned, we want
    to use printk() and pr_*(). U-Boot does not support them in a clean
    way. So, people end up with local macros, or compat headers here and
    there, then we occasionally see build errors of definition conflicts.

    We have include/linux/compat.h, but putting all sorts of unrelated
    things into a single header is just a temporal workaround. Hence this
    patch, to find the best home for all printk variants. If you want to
    use printk() and friends, please include . This header
    is self-contained, and pulls in only a few headers.

    When I was testing this clean-up, I noticed the image size exceeded
    its platform limit on some boards. This is because all pr_*() that
    were previously defined as no-op in include/linux/mtd/mtd.h (unless
    CONFIG_MTD_DEBUG is set), are now enabled.

    To make such boards happy, this commit also implements CONFIG_LOGLEVEL.
    The concept is similar to the kernel parameter "loglevel". (Actually,
    the Kconfig help message was taken from kernel-paremeter.txt of Linux)
    Messages with a loglevel smaller than console loglevel will be printed.

    The difference is the loglevel is build-time determined. To save the
    image size, lower priority pr_*() are compiled out. I set the default
    of CONFIG_LOGLEVEL to 6, i.e. pr_notice and higher priority messages
    are compiled in.

    I adjusted CONFIG_LOGLEVEL to avoid build error for some boards.

    Signed-off-by: Masahiro Yamada
    [trini: Add in SPL_LOGLEVEL that is the same as LOGLEVEL]
    Signed-off-by: Tom Rini

    Masahiro Yamada
     

28 Aug, 2017

1 commit

15 Aug, 2017

2 commits

08 Aug, 2017

1 commit

01 Aug, 2017

1 commit

  • 8f1a80e99   configs: Migrate CMD_NAND* ... Browse Code »

    Migrate all remaining instances of CMD_NAND, CMD_NAND_TRIMFFS
    CMD_NAND_LOCK_UNLOCK and CMD_NAND_TORTURE from the headers into the
    defconfig files.

    Tested-by: Adam Ford
    Signed-off-by: Tom Rini
    Reviewed-by: Bin Meng

    Tom Rini
     

26 Jul, 2017

1 commit

  • 2be296538   Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig ... Browse Code »
    20

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_MMC
    CONFIG_ENV_IS_IN_NAND
    CONFIG_ENV_IS_IN_UBI
    CONFIG_ENV_IS_NOWHERE

    In fact this already exists for sunxi as a 'choice' config. However not
    all the choices are available in Kconfig yet so we cannot use that. It
    would lead to more than one option being set.

    In addition, one purpose of this series is to allow the environment to be
    stored in more than one place. So the existing choice is converted to a
    normal config allowing each option to be set independently.

    There are not many opportunities for Kconfig updates to reduce the size of
    this patch. This was tested with

    ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

    And then manual updates. This is because for CHAIN_OF_TRUST boards they
    can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
    now.

    Signed-off-by: Simon Glass
    Signed-off-by: Tom Rini

    Simon Glass
     

19 Mar, 2017

1 commit

  • 3a649407a   arm: Migrate SYS_THUMB_BUILD to Kconfig, introduce SPL_SYS_THUMB_BUILD ... Browse Code »
    20

    Today, we have cases where we wish to build all of U-Boot in Thumb2 mode for
    various reasons. We also have cases where we only build SPL in Thumb2 mode due
    to size constraints and wish to build the rest of the system in ARM mode. So
    in this migration we introduce a new symbol as well, SPL_SYS_THUMB_BUILD to
    control if we build everything or just SPL (or in theory, just U-Boot) in
    Thumb2 mode.

    Signed-off-by: Tom Rini
    Acked-by: Siarhei Siamashka

    Tom Rini
     

14 Mar, 2017

1 commit

26 Jan, 2017

1 commit

21 Jan, 2017

1 commit

  • 40d5534cf   ARM: Default to using optimized memset and memcpy routines ... Browse Code »

    We have long had available optimized versions of the memset and memcpy
    functions that are borrowed from the Linux kernel. We should use these
    in normal conditions as the speed wins in many workflows outweigh the
    relatively minor size increase. However, we have a number of places
    where we're simply too close to size limits in SPL and must be able to
    make the size vs performance trade-off in those cases.

    Cc: Philippe Reynes
    Cc: Eric Jarrige
    Cc: Heiko Schocher
    Cc: Magnus Lilja
    Cc: Lokesh Vutla
    Cc: Chander Kashyap
    Cc: Akshay Saraswat
    Cc: Simon Glass
    Cc: Stefan Roese
    Signed-off-by: Tom Rini
    Acked-by: Stefan Roese
    Reviewed-by: Simon Glass

    Tom Rini
     

30 Dec, 2016

1 commit

  • c27269953   mmc: complete unfinished move of CONFIG_MMC ... Browse Code »
    26

    Commit 7a777f6d6f35 ("mmc: Add generic Kconfig option") created
    a Kconfig entry for this option without any actual moves, then
    commit 44c798799f66 ("sunxi: Use Kconfig CONFIG_MMC") moved
    instances only for SUNXI.

    We generally do not like such partial moves. This kind of work
    is automated by tools/moveconfig.py, so it is pretty easy to
    complete this move.

    I am adding "default ARM || PPC || SANDBOX" (suggested by Tom).
    This shortens the configs and will ease new board porting.

    This commit was created as follows:

    [1] Edit Kconfig (remove the "depends on", add the "default",
    copy the prompt and help message from Linux)

    [2] Run 'tools/moveconfig.py -y -s -r HEAD MMC'

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Jaehoon Chung

    Masahiro Yamada
     

12 Oct, 2016

1 commit

17 Sep, 2016

8 commits

09 Sep, 2016

1 commit

27 Jun, 2016

1 commit

10 Jun, 2016

1 commit

26 Apr, 2016

2 commits

15 Mar, 2016

1 commit

19 Jan, 2016

1 commit

25 Nov, 2015

1 commit

26 Jun, 2015

2 commits

  • ef0f2f575   Move defaults from config_cmd_default.h to Kconfig ... Browse Code »

    This sets the default commands Kconfig to match
    include/config_cmd_default.h commands in the common/Kconfig and removes
    them from include/configs.

    Signed-off-by: Joe Hershberger
    [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates]
    Signed-off-by: Tom Rini

    Joe Hershberger
     
  • c9bb942e2   Move default y configs out of arch/board Kconfig ... Browse Code »

    Some archs/boards specify their own default by pre-defining the config
    which causes the Kconfig system to mix up the order of the configs in
    the defconfigs... This will cause merge pain if allowed to proliferate.

    Remove the configs that behave this way from the archs.

    A few configs still remain, but that is because they only exist as
    defaults and do not have a proper Kconfig entry. Those appear to be:

    SPIFLASH
    DISPLAY_BOARDINFO

    Signed-off-by: Joe Hershberger
    [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates,
    drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM]
    Signed-off-by: Tom Rini

    Joe Hershberger
     

01 Jun, 2015

1 commit

13 May, 2015

1 commit

  • bd328eb38   Clean all defconfigs with savedefconfig ... Browse Code »

    In order to reduce merge conflicts and to maintain the simplest possible
    defconfig files, we should be using the savedefconfig feature of Kconfig
    every time a new feature is added. This keeps the defconfig settings to
    a minimum (only those things not default) and keeps them in the same
    order as the Kconfig options.

    Signed-off-by: Joe Hershberger
    Cc: Masahiro Yamada
    Acked-by: Stephen Warren
    Cc: Tom Rini

    Joe Hershberger
     

16 Mar, 2015

1 commit

21 Feb, 2015

1 commit

  • 4614b8913   ARM: at91: move board select menu and common settings ... Browse Code »

    The board select menu in arch/arm/Kconfig is still big.
    To slim down it, this commit moves AT91 boards to
    arch/arm/mach-at91/Kconfig.
    Also, consolidate "config SYS_SOC" in each board Kconfig.

    The Kconfig files under board/ directory were modified with the
    following command:

    find board -name Kconfig | xargs sed -i -e '
    /config SYS_SOC/ {
    N
    /default "at91"/ {
    N
    d
    }
    }
    '

    Signed-off-by: Masahiro Yamada
    Acked-by: Andreas Bießmann

    Masahiro Yamada
     

19 Jan, 2015

1 commit