Eric Lee / smarc-uboot

20 Feb, 2019

1 commit

  • 0cd9465c0   ARM: omap3_logic: Enable SPL booting device tree ... Browse Code »

    With the generic omap3-u-boot.dtsi file available, this patch
    increased the memory of the various incarnations of the omap3_logic
    board, and points their respective u-boot.dtsi files to the newly
    created generic one, and removes the PLATDATA from the board file.

    These are all done at once because the're all utilizing the same
    omap3logic.c board file.

    Signed-off-by: Adam Ford

    Adam Ford
     

08 Jan, 2019

1 commit

13 Dec, 2018

1 commit

10 Dec, 2018

1 commit

17 Nov, 2018

2 commits

14 Nov, 2018

2 commits

12 Sep, 2018

3 commits

04 Sep, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

14 Aug, 2018

1 commit

11 Aug, 2018

2 commits

28 Jul, 2018

1 commit

24 Jul, 2018

1 commit

04 Jun, 2018

1 commit

30 May, 2018

1 commit

  • 312a10f16   fastboot: Move fastboot to drivers/fastboot ... Browse Code »

    Separate CMD_FASTBOOT from FASTBOOT and move code and configuration to
    drivers/fastboot.

    Switch dependencies on FASTBOOT to USB_FUNCTION_FASTBOOT as anyone who wants
    FASTBOOT before this series wants USB_FUNCTION_FASTBOOT. Split
    USB_FUNCTION_FASTBOOT from FASTBOOT so they retain their existing
    behaviour.

    Signed-off-by: Alex Kiernan
    Reviewed-by: Simon Glass
    Acked-by: Joe Hershberger

    Alex Kiernan
     

28 Apr, 2018

1 commit

  • f1b1f7706   Convert CONFIG_SPI to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_SPI

    This partly involves updating code that assumes that CONFIG_SPI implies
    things that are specific to the MPC8xx SPI driver. For now, just update
    the CONFIG tests. This also involves reworking the default for
    CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a
    reasonable default, as it does not cause any compile failures.

    Signed-off-by: Adam Ford
    Signed-off-by: Tom Rini

    Adam Ford
     

08 Apr, 2018

1 commit

16 Mar, 2018

1 commit

  • 6f6b7cfa8   Convert all of CONFIG_CONS_INDEX to Kconfig ... Browse Code »
    14

    This converts the following to Kconfig:
    CONFIG_CONS_INDEX

    We have existing entries for this option in a number of places, with
    different guards on them. They're also sometimes used for things not
    directly inside of the serial driver. First, introduce a new symbol to
    guard the use of CONFIG_CONS_INDEX, so that in the case where we don't
    need this for the serial driver, but for some other use, we can still do
    it. Next, consolidate all of these into the single entry in
    drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that
    we can imply a correct value here to make the defconfig side of this
    smaller.

    Signed-off-by: Adam Ford
    [trini: Rework a lot of the logic here, such that I took authorship from
    Adam, but kept his S-o-B line]
    Signed-off-by: Tom Rini

    Tom Rini
     

15 Mar, 2018

1 commit

  • 4d1dd69e5   omap3_logic: Enable DM_SPI ... Browse Code »

    With the introduction of ("Boards,Need,to,Switch,DM] spi: omap3_spi:
    Full dm conversion"), Driver Model for McSPI is now available on the
    omap3. This enables the config by default on omap3_logic boards.

    Signed-off-by: Adam Ford
    Reviewed-by: Jagan Teki

    Adam Ford
     

23 Feb, 2018

2 commits

06 Feb, 2018

1 commit

  • a4fa81146   cmd: Make CONFIG_CMD_FPGA depend on CONFIG_FPGA ... Browse Code »

    cmd/Makefile has:

    ifdef CONFIG_FPGA
    obj-$(CONFIG_CMD_FPGA) += fpga.o
    endif

    which means that if CONFIG_FPGA is not set, CONFIG_CMD_FPGA silently
    does nothing. Let's remove that Makefile conditional and instead express
    this equivalent dependency in Kconfig, so a lot of redundant

    # CONFIG_CMD_FPGA is not set

    can be removed from board defconfigs that don't actually have an FPGA.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

23 Jan, 2018

3 commits

22 Jan, 2018

1 commit

13 Dec, 2017

1 commit

06 Nov, 2017

1 commit

21 Oct, 2017

2 commits

  • 8daec2d9d   net: Add SMC911X driver to Kconfig, convert ... Browse Code »

    We add the various SMC91XX symbols to drivers/net/Kconfig and then this
    converts the following to Kconfig:
    CONFIG_SMC911X
    CONFIG_SMC911X_BASE
    CONFIG_SMC911X_16_BIT
    CONFIG_SMC911X_32_BIT

    Signed-off-by: Adam Ford
    [trini: Apply to the rest of the tree, re-squash old and new patch]
    Signed-off-by: Tom Rini

    Adam Ford
     
  • 0a9ef4515   Convert CONFIG_NAND_OMAP_GPMC et al and CONFIG_NAND_MXC to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_NAND_MXC
    CONFIG_NAND_OMAP_GPMC
    CONFIG_NAND_OMAP_GPMC_PREFETCH
    CONFIG_NAND_OMAP_ELM
    CONFIG_SPL_NAND_AM33XX_BCH
    CONFIG_SPL_NAND_SIMPLE
    CONFIG_SYS_NAND_BUSWIDTH_16BIT

    Signed-off-by: Adam Ford
    Reviewed-by: Heiko Schocher
    [trini: Finish migration of CONFIG_SPL_NAND_SIMPLE, fix some build issues,
    add CONFIG_NAND_MXC so we can do CONFIG_SYS_NAND_BUSWIDTH_16BIT]
    Signed-off-by: Tom Rini

    Adam Ford
     

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

04 Oct, 2017

3 commits

  • cfa34996b   cmd: fastboot: Rework fastboot dependency ... Browse Code »

    Fastboot need a bunch of options to be operating properly, such as the
    g_dnl gadget, the fastboot command, and some options that make sense. Since
    fastboot is now part of Kconfig, make sure we have them right.

    That will also reduce the boilerplate in the defconfigs.

    Reviewed-by: Łukasz Majewski
    Reviewed-by: Simon Glass
    Signed-off-by: Maxime Ripard

    Maxime Ripard
     
  • a95aee6af   usb: gadget: Make g_dnl USB settings common ... Browse Code »

    The g_dnl USB settings for the vendor ID, product ID and manufacturer are
    actually common settings that can and should be shared by all the gadgets.

    Make them common by renaming them, and convert all the users.

    Reviewed-by: Simon Glass
    Reviewed-by: Lukasz Majewski
    Signed-off-by: Maxime Ripard

    Maxime Ripard
     
  • 3f33d3c8f   usb: gadget: Convert USB_ETHER to Kconfig ... Browse Code »

    The USB Ethernet gadget option has not yet been moved to Kconfig, let's
    deal with that.

    Reviewed-by: Łukasz Majewski
    Reviewed-by: Simon Glass
    Signed-off-by: Maxime Ripard

    Maxime Ripard
     

30 Sep, 2017

1 commit