Eric Lee / smarc-uboot

30 Apr, 2019

1 commit

27 Nov, 2018

1 commit

  • 58fcca0c0   ARM: vexpress_*_defconfig: Enable CMD_UBI support ... Browse Code »

    This allow for convenient use of QEMU machine to test loading of UBI
    filesystem. There are a couple of changes made together of this which
    are required:

    1) The malloc must be at least 512 KiB to allow the use of UBI
    filesystem. We are going to enable it in a next patch.

    2) MTD_DEVICE must be enabled, otherwise we get missing symbols
    during the build

    Following configs were change:

    - vexpress_aemv8a_dram_defconfig
    - vexpress_aemv8a_juno_defconfig
    - vexpress_aemv8a_semi_defconfig
    - vexpress_ca15_tc2_defconfig
    - vexpress_ca5x2_defconfig
    - vexpress_ca9x4_defconfig

    Signed-off-by: Otavio Salvador
    Acked-by: Liviu Dudau

    Otavio Salvador
     

20 Oct, 2018

1 commit

04 Sep, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

28 Apr, 2018

1 commit

16 Mar, 2018

1 commit

  • 6f6b7cfa8   Convert all of CONFIG_CONS_INDEX to Kconfig ... Browse Code »
    14

    This converts the following to Kconfig:
    CONFIG_CONS_INDEX

    We have existing entries for this option in a number of places, with
    different guards on them. They're also sometimes used for things not
    directly inside of the serial driver. First, introduce a new symbol to
    guard the use of CONFIG_CONS_INDEX, so that in the case where we don't
    need this for the serial driver, but for some other use, we can still do
    it. Next, consolidate all of these into the single entry in
    drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that
    we can imply a correct value here to make the defconfig side of this
    smaller.

    Signed-off-by: Adam Ford
    [trini: Rework a lot of the logic here, such that I took authorship from
    Adam, but kept his S-o-B line]
    Signed-off-by: Tom Rini

    Tom Rini
     

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

06 Feb, 2018

1 commit

  • a4fa81146   cmd: Make CONFIG_CMD_FPGA depend on CONFIG_FPGA ... Browse Code »

    cmd/Makefile has:

    ifdef CONFIG_FPGA
    obj-$(CONFIG_CMD_FPGA) += fpga.o
    endif

    which means that if CONFIG_FPGA is not set, CONFIG_CMD_FPGA silently
    does nothing. Let's remove that Makefile conditional and instead express
    this equivalent dependency in Kconfig, so a lot of redundant

    # CONFIG_CMD_FPGA is not set

    can be removed from board defconfigs that don't actually have an FPGA.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

18 Nov, 2017

1 commit

  • b6251db8c   Kconfig: Introduce USE_BOOTCOMMAND and migrate BOOTCOMMAND ... Browse Code »
    54

    We first introduce CONFIG_USE_BOOTCOMMAND, similar to
    CONFIG_USE_BOOTARGS. We then migrate CONFIG_BOOTCOMMAND for most
    CONFIG_DISTRO_DEFAULT users. In some cases platforms have a complex
    scheme around this usage, and these have been defered for the moment so
    that platform maintainers can work on a migration plan.

    Signed-off-by: Tom Rini
    Reviewed-by: Lukasz Majewski

    Tom Rini
     

21 Oct, 2017

1 commit

  • 8daec2d9d   net: Add SMC911X driver to Kconfig, convert ... Browse Code »

    We add the various SMC91XX symbols to drivers/net/Kconfig and then this
    converts the following to Kconfig:
    CONFIG_SMC911X
    CONFIG_SMC911X_BASE
    CONFIG_SMC911X_16_BIT
    CONFIG_SMC911X_32_BIT

    Signed-off-by: Adam Ford
    [trini: Apply to the rest of the tree, re-squash old and new patch]
    Signed-off-by: Tom Rini

    Adam Ford
     

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

28 Aug, 2017

1 commit

15 Aug, 2017

1 commit

26 Jul, 2017

1 commit

20 Mar, 2017

1 commit

13 Feb, 2017

1 commit

  • e856bdcfb   flash: complete CONFIG_SYS_NO_FLASH move with renaming ... Browse Code »
    20

    We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is
    not completed. Finish this work by the tool.

    During this move, let's rename it to CONFIG_MTD_NOR_FLASH.
    Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH"
    than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic will
    make the code more readable. Besides, negative meaning symbols do
    not fit in obj-$(CONFIG_...) style Makefiles.

    This commit was created as follows:

    [1] Edit "default n" to "default y" in the config entry in
    common/Kconfig.

    [2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH"

    [3] Rename the instances in defconfigs by the following:
    find . -path './configs/*_defconfig' | xargs sed -i \
    -e '/CONFIG_SYS_NO_FLASH=y/d' \
    -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/'

    [4] Change the conditionals by the following:
    find . -name '*.[ch]' | xargs sed -i \
    -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \
    -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \
    -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \
    -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/'

    [5] Modify the following manually
    - Rename the rest of instances
    - Remove the description from README
    - Create the new Kconfig entry in drivers/mtd/Kconfig
    - Remove the old Kconfig entry from common/Kconfig
    - Remove the garbage comments from include/configs/*.h

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada