01 Nov, 2013
1 commit
-
Signed-off-by: Masahiro Yamada
Cc: Albert ARIBAUD
Cc: Andreas Bießmann
Cc: Stefano Babic
Cc: Prafulla Wadaskar
Cc: Minkyu Kang
Cc: Vipin Kumar
Cc: Tom Warren
Cc: Tom Rini
24 Jul, 2013
1 commit
-
Signed-off-by: Wolfgang Denk
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini
12 Mar, 2013
1 commit
-
In master we had already taken a patch to fix the davinci GPIO code for
CONFIG_SOC_DM646X and in u-boot-ti we have additional patches to support
DA830 (which is CONFIG_SOC_DA8XX && !CONFIG_SOC_DA850). Resolve these
conflicts manually and comment the #else/#endif lines for clarity.Conflicts:
arch/arm/include/asm/arch-davinci/gpio.h
drivers/gpio/da8xx_gpio.cSigned-off-by: Tom Rini
09 Mar, 2013
2 commits
-
Add check for write protection in omap mmc driver.
Signed-off-by: Nikita Kiryanov
Signed-off-by: Igor Grinberg
Reviewed-by: Tom Rini -
Implement driver check for card detection.
Signed-off-by: Nikita Kiryanov
Signed-off-by: Igor Grinberg
02 Mar, 2013
1 commit
-
CONFIG_SPL_OS_BOOT_KEY is used only in board files. It is
not required to have a general CONFIG_ option. Rename it and
define it in board directory.Signed-off-by: Stefano Babic
Reviewed-by: Tom Rini
10 Dec, 2012
1 commit
-
Instead of passing individual registers by value to board_get_mem_timings,
pass a board_mem_timings structure pointer for the board files to fill in.
Pass same structure pointer to write_sdrc_timings. This saves about
90 bytes of space in SPL.Signed-off-by: Peter Barada
29 Jul, 2012
1 commit
-
Also drop a few files referring to no longer / not yet supported
boards.Signed-off-by: Wolfgang Denk
Cc: Prafulla Wadaskar
Cc: Stefan Roese
Cc: Kim Phillips
Cc: Andy Fleming
Cc: Jason Jin
Cc: Stefano Babic
Cc: Daniel Schwierzeck
Acked-by: Stefano Babic
Acked-by: Daniel Schwierzeck
15 May, 2012
2 commits
-
Add parameters to the OMAP MMC initialization function so the board can
mask host capabilities and set the maximum clock frequency. While the
OMAP supports a certain set of MMC host capabilities, individual boards
may be more restricted and the OMAP may need to be configured to match
the board. The PRG_SDMMC1_SPEEDCTRL bit in the OMAP3 is an example.Signed-off-by: Jonathan Solnit
-
This change adds a basic support for Embest/Timll DevKit3250 board,
NOR and UART are the only supported peripherals for a moment. The board
doesn't require low-level init, because the initial SDRAM and GPIO
configuration is performed during kickstart bootloader execution.Signed-off-by: Vladimir Zapolskiy
Cc: Albert ARIBAUD
Acked-by: Marek Vasut
28 Mar, 2012
2 commits
-
- Implements spl_start_uboot() for devkit8000
- Add configs to activate direct OS boot from SPLSigned-off-by: Simon Schwarz
CC: Tom Rini
CC: Stefano Babic
CC: Wolfgang Denk -
Linux crashes if the GPMC isn't configured for the dm9000.
Signed-off-by: Simon Schwarz
CC: Tom Rini
CC: Stefano Babic
CC: Wolfgang Denk
24 Dec, 2011
1 commit
-
Use enable_gpmc_cs_config instead of local writing
timing configuration for GPMC.Signed-off-by: Thomas Weber
07 Dec, 2011
1 commit
-
This changes to making the board be responsible for providing the
memory initialization timings in SPL and converts the devkit8000
to this framework. In SPL we try and initialize both CS0 and CS1.Cc: Frederik Kriewitz
Signed-off-by: Tom Rini
28 Oct, 2011
1 commit
-
This function is also defined in omap-common/spl_mmc.de so the implementation
in devkit8000.c was protected by a ifdef.Signed-off-by: Simon Schwarz
16 Oct, 2011
1 commit
-
The top level Makefile does not do any recursion into subdirs when
cleaning, so these clean/distclean targets in random arch/board dirs
never get used. Punt them all.MAKEALL didn't report any errors related to this that I could see.
Signed-off-by: Mike Frysinger
01 Oct, 2011
1 commit
-
Add NAND SPL support to the devkit8000 config
Signed-off-by: Simon Schwarz
Signed-off-by: Sandeep Paulraj
04 Sep, 2011
1 commit
-
Switch from the legacy omap3 mmc driver to the new generic omap hsmmc
driver. This patch is based on the work done for Beagle, etc.Signed-off-by: Tom Rini
Signed-off-by: Sandeep Paulraj
18 Nov, 2010
1 commit
-
Before this commit, weak symbols were not overridden by non-weak symbols
found in archive libraries when linking with recent versions of
binutils. As stated in the System V ABI, "the link editor does not
extract archive members to resolve undefined weak symbols".This commit changes all Makefiles to use partial linking (ld -r) instead
of creating library archives, which forces all symbols to participate in
linking, allowing non-weak symbols to override weak symbols as intended.
This approach is also used by Linux, from which the gmake function
cmd_link_o_target (defined in config.mk and used in all Makefiles) is
inspired.The name of each former library archive is preserved except for
extensions which change from ".a" to ".o". This commit updates
references accordingly where needed, in particular in some linker
scripts.This commit reveals board configurations that exclude some features but
include source files that depend these disabled features in the build,
resulting in undefined symbols. Known such cases include:
- disabling CMD_NET but not CMD_NFS;
- enabling CONFIG_OF_LIBFDT but not CONFIG_QE.Signed-off-by: Sebastien Carlier
21 Oct, 2010
1 commit
-
Fix compilation of Devkit8000 after introduction of
ARM relocation support.Signed-off-by: Thomas Weber
Adapt to TEXT_BASE => CONFIG_SYS_TEXT_BASE rename.
Signed-off-by: Wolfgang Denk
19 Oct, 2010
1 commit
-
The change is currently needed to be able to remove the board
configuration scripting from the top level Makefile and replace it by
a simple, table driven script.Moving this configuration setting into the "CONFIG_*" name space is
also desirable because it is needed if we ever should move forward to
a Kconfig driven configuration system.Signed-off-by: Wolfgang Denk
04 Jan, 2010
1 commit
-
Not all boards have both LEDs hooked, so enabling both on
boards with single LED will just waste power. Make it
possible to choose LEDs by adding argument to
twl4030_led_init().Using this turn on only LEDB for pandora, leave both LEDs
on for all other boards, as it was before this patch.Signed-off-by: Grazvydas Ignotas
13 Oct, 2009
1 commit
-
Switch from space-based indentation to tab-based in mux configs, as pointed
out by WD at:http://lists.denx.de/pipermail/u-boot/2009-September/061241.html
Nothing but whitespace changes in this patch (diff -w gives no output).
Signed-off-by: Olof Johansson
05 Sep, 2009
1 commit
-
This patch adds support for the DevKit8000 board.
Signed-off-by: Frederik Kriewitz
