10 Apr, 2015
1 commit
-
Signed-off-by: Albert ARIBAUD (3ADEV)
15 Oct, 2013
1 commit
-
Signed-off-by: Wolfgang Denk
24 Jul, 2013
1 commit
-
Signed-off-by: Wolfgang Denk
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini
22 Oct, 2011
1 commit
-
Our boards rely on dtt for initialization of fan hardware.
dtt_init() was implemented to be called form board specific code.Signed-off-by: Dirk Eibach
Acked-by: Heiko Schocher
Tested-by: Heiko Schocher
05 Aug, 2011
1 commit
-
The U-Boot Design Principles[1] clearly say:
Initialize devices only when they are needed within U-Boot, i.e. don't
initialize the Ethernet interface(s) unless U-Boot performs a download
over Ethernet; don't initialize any IDE or USB devices unless U-Boot
actually tries to load files from these, etc. (and don't forget to
shut down these devices after using them - otherwise nasty things may
happen when you try to boot your OS).So, do not initialize and read the sensors on startup.
Signed-off-by: Heiko Schocher
cc: Wolfgang Denk
cc: Holger Brunck
19 Oct, 2008
2 commits
-
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
-
This patch adds support for the National LM63 temperature
sensor with integrated fan control. It's used on the GDSys
Neo board (405EP) which will be submitted later.Signed-off-by: Dirk Eibach
Acked-by: Stefan Roese
19 Aug, 2008
2 commits
-
Signed-off-by: Wolfgang Denk
-
Signed-off-by: Ricardo Ribalda Delgado
13 Jul, 2008
1 commit
-
Clean Makefile
Move device specific values to driver for better readingSigned-off-by: Michal Simek
Acked-by: Stefan Roese
28 Dec, 2007
1 commit
-
This driver is based on the driver for the LM75.
Signed-off-by: Larry Johnson
26 Jul, 2007
1 commit
-
Signed-off-by: John Otken
21 Dec, 2006
1 commit
-
Signed-off-by: Heiko Schocher
20 Jun, 2003
1 commit
-
- Hymod board database mods: add "who" field and new xilinx chip types
- provide new "init_cmd_timeout()" function so code external to
"common/main.c" can use the "reset_cmd_timeout()" function before
entering the main loop
- add DTT support for adm1021 (new file dtt/adm1021.c; config
slightly different. see include/configs/hymod.h for an example
(requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
CFG_DTT_ADM1021 defined)
- add new "eeprom_probe()" function which has similar args and
behaves in a similar way to "eeprom_read()" etc.
- add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
- gdbtools copyright update
- ensure that set_msr() executes the "sync" and "isync" instructions
after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
- 8260 I/O ports fix: Open Drain should be set last when configuring
- add SIU IRQ defines for 8260
- allow LDSCRIPT override and OBJCFLAGS initialization: change to
config.mk to allow board configurations to override the GNU
linker script, selected via the LDSCRIPT, make variable, and to
give an initial value to the OBJCFLAGS make variable
- 8260 i2c enhancement:
o correctly extends the timeout depending on the size of all
queued messages for both transmit and receive
o will not continue with receive if transmit times out
o ensures that the error callback is done for all queued tx
and rx messages
o correctly detects both tx and rx timeouts, only delivers one to
the callback, and does not overwrite an earlier error
o logic in i2c_probe now correct
- add "vprintf()" function so that "panic()" function can be
technically correct
- many Hymod board changes
03 Nov, 2002
1 commit