Eric Lee / smarc-uboot

16 Aug, 2017

3 commits

  • 00caae6d4   env: Rename getenv/_f() to env_get() ... Browse Code »

    We are now using an env_ prefix for environment functions. Rename these
    two functions for consistency. Also add function comments in common.h.

    Quite a few places use getenv() in a condition context, provoking a
    warning from checkpatch. These are fixed up in this patch also.

    Suggested-by: Wolfgang Denk
    Signed-off-by: Simon Glass

    Simon Glass
     
  • 018f53032   env: Rename common functions related to setenv() ... Browse Code »

    We are now using an env_ prefix for environment functions. Rename these
    commonly used functions, for consistency. Also add function comments in
    common.h.

    Suggested-by: Wolfgang Denk
    Signed-off-by: Simon Glass

    Simon Glass
     
  • 382bee57f   env: Rename setenv() to env_set() ... Browse Code »

    We are now using an env_ prefix for environment functions. Rename setenv()
    for consistency. Also add function comments in common.h.

    Suggested-by: Wolfgang Denk
    Signed-off-by: Simon Glass

    Simon Glass
     

14 Aug, 2017

1 commit

12 Jul, 2017

1 commit

09 Jul, 2017

1 commit

  • 907208c45   powerpc: Partialy restore core of mpc8xx ... Browse Code »
    14

    CS Systemes d'Information (CSSI) manufactures 8xx boards for
    critical communication systems. Those boards have been
    running U-Boot since 2010 and will have to be maintained
    until at least 2027.

    commit 5b8e76c35ec312a3f73126bd1a2d2c0965b98a9f
    ("powerpc, 8xx: remove support for 8xx") orphaned those boards
    by removing support for the mpc8xx CPU.

    This commit partially restores support for the 8xx, with the
    following limitations:
    - Restores support for MPC866 and MPC885 only
    - Does not restore IDE, PCMCIA, I2C, USB
    - Does not restore examples
    - Does not restore POST
    - Does not restore Ethernet on SCC
    - Does not restore console on SCC
    - Does not restore bedbug and kgdb support

    As the 866 and 885 do not support the following features,
    they are not restored either:
    - VIDEO / LCD
    - RTC clock

    The CPM uCODE patch is not restored either, because:
    - 866 and 885 already have support for I2C and SPI relocation
    without a uCODE patch
    - relocation of SMC, I2C or SPI is only needed for using SCCs
    for Ethernet or QMC

    The dynamic setup/calculation of clocks is removed, we
    expect the target being use with the clock and PLPRCR register
    defined in the configuration.
    All the clock settings for 8xx prior to 866 is removed as
    well as we now only support 866 and 885.

    This code is mature and addresses mature boards. Therefore
    all code enclosed in '#if 0/#endif' and '#if XX_DEBUG/#endif'
    is unneeded.

    The following files are not restored by this patch:

    - arch/powerpc/cpu/mpc8xx/bedbug_860.c
    - arch/powerpc/cpu/mpc8xx/fec.h
    - arch/powerpc/cpu/mpc8xx/kgdb.S
    - arch/powerpc/cpu/mpc8xx/plprcr_write.S
    - arch/powerpc/cpu/mpc8xx/scc.c
    - arch/powerpc/cpu/mpc8xx/upatch.c
    - arch/powerpc/cpu/mpc8xx/video.c
    - arch/powerpc/include/asm/status_led.h
    - arch/powerpc/lib/ide.c
    - arch/powerpc/lib/ide.h
    - doc/README.MPC866
    - drivers/pcmcia/mpc8xx_pcmcia.c
    - drivers/rtc/mpc8xx.c
    - drivers/usb/gadget/mpc8xx_udc.c
    - drivers/video/mpc8xx_lcd.c
    - examples/standalone/test_burst.c
    - examples/standalone/test_burst.h
    - examples/standalone/test_burst_lib.S
    - examples/standalone/timer.c
    - include/mpc823_lcd.h
    - include/usb/mpc8xx_udc.h
    - post/cpu/mpc8xx/Makefile
    - post/cpu/mpc8xx/cache.c
    - post/cpu/mpc8xx/cache_8xx.S
    - post/cpu/mpc8xx/ether.c
    - post/cpu/mpc8xx/spr.c
    - post/cpu/mpc8xx/uart.c
    - post/cpu/mpc8xx/usb.c
    - post/cpu/mpc8xx/watchdog.c

    Some of the restored files are not located in a proper location.
    In order to keep traceability of the changes, they will be
    moved to their correct location and moved to Kconfig in a
    followup patch.

    This patch also declares CSSI as point of contact for the update
    of the 8xx platform, as those boards are the only ones still
    being maintained on the 8xx area. A later patch will add
    those boards to the tree.

    Signed-off-by: Christophe Leroy

    Christophe Leroy
     

23 Jun, 2017

1 commit

16 Jun, 2017

1 commit

12 Jun, 2017

3 commits

23 May, 2017

1 commit

  • fc843a02a   Kconfig: Add a CONFIG_IDE option ... Browse Code »

    At present IDE support is controlled by CONFIG_CMD_IDE. Add a separate
    CONFIG_IDE option so that IDE support can be enabled without requiring
    the 'ide' command.

    Update existing users and move the ide driver into drivers/block since
    it should not be in common/.

    Signed-off-by: Simon Glass

    Simon Glass
     

08 Apr, 2017

1 commit

  • f2288c5a5   Apparent conflict between CONFIG_BLK and CONFIG_API ... Browse Code »

    Good evening,

    I am trying to port FreeBSD to the ASUS Tinker Board, a computer based
    on the Rockchip 3288 SoC. FreeBSD's boot loader (named loader(8)) needs
    CONFIG_API to be enabled, but trying to build an U-Boot from trunk with
    both CONFIG_API and CONFIG_BLK (as required for Rockchip SoC's?) leads
    to the following build failure:

    $ CROSS_COMPILE=arm-none-eabi- gmake tinker-rk3288_defconfig all
    ...
    CC api/api_storage.o
    api/api_storage.c: In function 'dev_read_stor':
    api/api_storage.c:334:9: error: 'struct blk_desc' has no member named 'block_read'
    if ((dd->block_read) == NULL) {
    ^~
    api/api_storage.c:339:11: error: 'struct blk_desc' has no member named 'block_read'
    return dd->block_read(dd, start, len, buf);
    ^~
    api/api_storage.c:340:1: warning: control reaches end of non-void function [-Wreturn-type]
    }
    ^
    gmake[2]: *** [scripts/Makefile.build:281: api/api_storage.o] Fehler 1
    gmake[1]: *** [Makefile:1229: api] Fehler 2
    gmake: *** [Makefile:460: __build_one_by_one] Error 2

    I applied the following fix, but the product doesn't boot. Perhaps
    that's not a property of the fix though:

    Yours,
    Robert Clausecker

    fuz@fuz.su
     

09 Feb, 2017

1 commit

21 Jan, 2017

1 commit

  • d3e8f6302   api: storage: Test all block device in dev_stor_get ... Browse Code »

    In a config with one MMC at device id '1' and no MMC at device id '0'
    (a BeagleBone Black with no sd inserted for example), the current code
    will first test to access the MMC 0 (sd port), seeing that no device is
    present it will simply return that no more device are present for this
    class.
    This patch fixes this by testing all devices for each class.

    Signed-off-by: Emmanuel Vadot

    Emmanuel Vadot
     

20 Jan, 2017

1 commit

05 Dec, 2016

5 commits

24 Oct, 2016

1 commit

22 Jul, 2016

1 commit

  • 211815784   api: Disable api_net when DM is used ... Browse Code »

    When CONFIG_API is selected with DM_ETH this
    error is present:
    api/api_net.c: In function 'dev_enum_net':
    api/api_net.c:61:35: warning: initialization from incompatible pointer
    type
    struct eth_device *eth_current = eth_get_dev();
    ^
    api/api_net.c:68:39: error: dereferencing pointer to incomplete type
    memcpy(di->di_net.hwaddr, eth_current->enetaddr, 6);
    ^
    Disable api_net functions when ETH_DM is selected.

    Signed-off-by: Chris Johns
    Signed-off-by: Michal Simek

    Michal Simek
     

21 May, 2016

1 commit

17 May, 2016

1 commit

15 Mar, 2016

2 commits

09 Mar, 2016

1 commit

08 Feb, 2016

1 commit

14 Jan, 2016

1 commit

  • 7c4213f6a   block: pass block dev not num to read/write/erase() ... Browse Code »

    This will allow the implementation to make use of data in the block_dev
    structure beyond the base device number. This will be useful so that eMMC
    block devices can encompass the HW partition ID rather than treating this
    out-of-band. Equally, the existence of the priv field is crying out for
    this patch to exist.

    Signed-off-by: Stephen Warren
    Reviewed-by: Tom Rini

    Stephen Warren
     

16 Sep, 2015

1 commit

  • ce2a07b77   api_storage: Fix non-first storage device enumeration ... Browse Code »

    When enabling CONFIG_API and chain-loading GRUB2 on jetson-tk1, only the
    eMMC would show up as (hd0), but not the SD card, leading to GRUB not
    finding its configuration and modules, falling back to a rescue shell.

    This is because enum_ended would get set for !more after returning a
    cookie for the first MMC device in group 3.

    Fix this by properly setting the "more" argument also in the case of the
    first storage device of a group.

    Signed-off-by: Andreas Färber

    Andreas Färber
     

19 Apr, 2015

1 commit

  • d2eaec600   net: Remove the bd* parameter from net stack functions ... Browse Code »

    This value is not used by the network stack and is available in the
    global data, so stop passing it around. For the one legacy function
    that still expects it (init op on old Ethernet drivers) pass in the
    global pointer version directly to avoid changing that interface.

    Signed-off-by: Joe Hershberger
    Reported-by: Simon Glass
    Reviewed-by: Simon Glass
    Signed-off-by: Simon Glass
    (Trival fix to remove an unneeded variable declaration in 4xx_enet.c)

    Joe Hershberger
     

22 Aug, 2014

1 commit

07 Mar, 2014

1 commit

  • 58dac3276   powerpc: mpc8260: consolidate CONFIG_MPC8260 and CONFIG_8260 ... Browse Code »

    Before this commit, CONFIG_MPC8260 and CONFIG_8260
    were used mixed-up.

    All boards with mpc8260 cpu defined both of them:
    - CONFIG_MPC8260 was defined in board config headers
    and include/common.h
    - CONFIG_8260 was defined arch/powerpc/cpu/mpc8260/config.mk

    We do not need to have both of them.
    This commit keeps only CONFIG_MPC8260.

    This commit does:
    - Delete CONFIG_8260 and CONFIG_MPC8260 definition
    in config headers and include/common.h
    - Rename CONFIG_8260 to CONFIG_MPC8260
    in arch/powerpc/cpu/mpc8260/config.mk.
    - Rename #ifdef CONFIG_8260 to #ifdef CONFIG_MPC8260

    Signed-off-by: Masahiro Yamada
    Cc: Wolfgang Denk

    Masahiro Yamada
     

25 Nov, 2013

2 commits

01 Nov, 2013

1 commit

24 Jul, 2013

1 commit

15 May, 2013

1 commit

21 Mar, 2013

1 commit