Eric Lee / smarc-uboot

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

13 Dec, 2017

1 commit

31 Oct, 2017

1 commit

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

28 Aug, 2017

1 commit

15 Aug, 2017

1 commit

12 Aug, 2017

2 commits

08 Aug, 2017

1 commit

26 Jul, 2017

1 commit

  • 2be296538   Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig ... Browse Code »
    20

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_MMC
    CONFIG_ENV_IS_IN_NAND
    CONFIG_ENV_IS_IN_UBI
    CONFIG_ENV_IS_NOWHERE

    In fact this already exists for sunxi as a 'choice' config. However not
    all the choices are available in Kconfig yet so we cannot use that. It
    would lead to more than one option being set.

    In addition, one purpose of this series is to allow the environment to be
    stored in more than one place. So the existing choice is converted to a
    normal config allowing each option to be set independently.

    There are not many opportunities for Kconfig updates to reduce the size of
    this patch. This was tested with

    ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

    And then manual updates. This is because for CHAIN_OF_TRUST boards they
    can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
    now.

    Signed-off-by: Simon Glass
    Signed-off-by: Tom Rini

    Simon Glass
     

12 Jul, 2017

1 commit

23 May, 2017

1 commit

22 May, 2017

1 commit

  • a1dc980d8   Convert CONFIG_CMD_EEPROM et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_CMD_EEPROM
    CONFIG_CMD_EEPROM_LAYOUT
    CONFIG_EEPROM_LAYOUT_HELP_STRING

    Signed-off-by: Simon Glass
    Reviewed-by: Tom Rini
    [trini: Rework Kconfig logic slightly, define EEPROM location on TI eval
    platforms]
    Signed-off-by: Tom Rini

    Simon Glass
     

30 Apr, 2017

1 commit

26 Jan, 2017

1 commit

24 Oct, 2016

3 commits

12 Oct, 2016

1 commit

20 Sep, 2016

1 commit

10 Sep, 2016

1 commit

05 Aug, 2016

1 commit

  • bb6b142fc   treewide: move CONFIG_PHYS_64BIT to Kconfig ... Browse Code »

    We need to ensure that CONFIG_PHYS_64BIT is configured via Kconfig so
    that it is always available to the build system. Otherwise we can run
    into cases where we have inconsistent sizes of certain attributes.

    Ravi Babu reported offset mismatch of struct dwc3 across files since
    commit 95ebc253e6d4 ("types.h: move and redefine resource_size_t").
    Since the commit, resource_addr_t points to phys_addr_t, whose size
    is dependent on CONFIG_PHYS_64BIT for ARM architecture.

    I tried my best to use "select" where possible (for example, ARMv8
    architecture) because I think this kind of option is generally user-
    unconfigurable. However, I see some of PowerPC boards have 36BIT
    defconfigs as well as 32BIT ones. I moved CONFIG_PHYS_64BIT to the
    defconfigs for such boards.

    CONFIG_36BIT is no longer referenced, so all of the defines were
    removed from CONFIG_SYS_EXTRA_OPTIONS.

    Fixes: 95ebc253e6d4 ("types.h: move and redefine resource_size_t")
    Signed-off-by: Masahiro Yamada
    Reported-by: Ravi Babu
    Acked-by: Stefan Roese
    Reviewed-by: Tom Rini
    Reviewed-by: York Sun

    Masahiro Yamada
     

10 Jun, 2016

1 commit

26 Apr, 2016

3 commits

15 Mar, 2016

2 commits

  • 73223f0e1   Kconfig: Move CONFIG_FIT and related options to Kconfig ... Browse Code »

    There are already two FIT options in Kconfig but the CONFIG options are
    still in the header files. We need to do a proper move to fix this.

    Move these options to Kconfig and tidy up board configuration:

    CONFIG_FIT
    CONFIG_OF_BOARD_SETUP
    CONFIG_OF_SYSTEM_SETUP
    CONFIG_FIT_SIGNATURE
    CONFIG_FIT_BEST_MATCH
    CONFIG_FIT_VERBOSE
    CONFIG_OF_STDOUT_VIA_ALIAS
    CONFIG_RSA

    Unfortunately the first one is a little complicated. We need to make sure
    this option is not enabled in SPL by this change. Also this option is
    enabled automatically in the host builds by defining CONFIG_FIT in the
    image.h file. To solve this, add a new IMAGE_USE_FIT #define which can
    be used in files that are built on the host but must also build for U-Boot
    and SPL.

    Note: Masahiro's moveconfig.py script is amazing.

    Signed-off-by: Simon Glass
    [trini: Add microblaze change, various configs/ re-applies]
    Signed-off-by: Tom Rini

    Simon Glass
     
  • 69e173eb5   Move CONFIG_OF_LIBFDT to Kconfig ... Browse Code »
    66

    Move this option to Kconfig and tidy up existing boards.

    Signed-off-by: Simon Glass

    Simon Glass
     

25 Nov, 2015

2 commits

22 Nov, 2015

1 commit

19 Nov, 2015

1 commit

23 Oct, 2015

1 commit

31 Aug, 2015

1 commit

26 Jun, 2015

2 commits

  • ef0f2f575   Move defaults from config_cmd_default.h to Kconfig ... Browse Code »

    This sets the default commands Kconfig to match
    include/config_cmd_default.h commands in the common/Kconfig and removes
    them from include/configs.

    Signed-off-by: Joe Hershberger
    [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates]
    Signed-off-by: Tom Rini

    Joe Hershberger
     
  • c9bb942e2   Move default y configs out of arch/board Kconfig ... Browse Code »

    Some archs/boards specify their own default by pre-defining the config
    which causes the Kconfig system to mix up the order of the configs in
    the defconfigs... This will cause merge pain if allowed to proliferate.

    Remove the configs that behave this way from the archs.

    A few configs still remain, but that is because they only exist as
    defaults and do not have a proper Kconfig entry. Those appear to be:

    SPIFLASH
    DISPLAY_BOARDINFO

    Signed-off-by: Joe Hershberger
    [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates,
    drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM]
    Signed-off-by: Tom Rini

    Joe Hershberger
     

01 Jun, 2015

2 commits

13 May, 2015

1 commit

  • bd328eb38   Clean all defconfigs with savedefconfig ... Browse Code »

    In order to reduce merge conflicts and to maintain the simplest possible
    defconfig files, we should be using the savedefconfig feature of Kconfig
    every time a new feature is added. This keeps the defconfig settings to
    a minimum (only those things not default) and keeps them in the same
    order as the Kconfig options.

    Signed-off-by: Joe Hershberger
    Cc: Masahiro Yamada
    Acked-by: Stephen Warren
    Cc: Tom Rini

    Joe Hershberger
     

30 Jul, 2014

1 commit

  • dd84058d2   kconfig: add board Kconfig and defconfig files ... Browse Code »

    This commit adds:
    - arch/${ARCH}/Kconfig
    provide a menu to select target boards
    - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
    set CONFIG macros to the appropriate values for each board
    - configs/${TARGET_BOARD}_defconfig
    default setting of each board

    (This commit was automatically generated by a conversion script
    based on boards.cfg)

    In Linux Kernel, defconfig files are located under
    arch/${ARCH}/configs/ directory.
    It works in Linux Kernel since ARCH is always given from the
    command line for cross compile.

    But in U-Boot, ARCH is not given from the command line.
    Which means we cannot know ARCH until the board configuration is done.
    That is why all the "*_defconfig" files should be gathered into a
    single directory ./configs/.

    Signed-off-by: Masahiro Yamada
    Acked-by: Simon Glass

    Masahiro Yamada