Eric Lee / smarc-uboot

24 Feb, 2018

1 commit

  • d021e9421   Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_BOOTP_BOOTPATH
    CONFIG_BOOTP_DNS
    CONFIG_BOOTP_GATEWAY
    CONFIG_BOOTP_HOSTNAME
    CONFIG_BOOTP_PXE
    CONFIG_BOOTP_SUBNETMASK
    CONFIG_CMDLINE_EDITING
    CONFIG_AUTO_COMPLETE
    CONFIG_SYS_LONGHELP
    CONFIG_SUPPORT_RAW_INITRD
    CONFIG_ENV_VARS_UBOOT_CONFIG

    Signed-off-by: Adam Ford
    [trini: Re-run the migration]
    Signed-off-by: Tom Rini

    Adam Ford
     

14 Feb, 2018

1 commit

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

08 Feb, 2018

1 commit

04 Sep, 2017

4 commits

  • e090579d0   include/configs: remove numerous CONFIG_SYS_BARGSIZE definitions ... Browse Code »

    This commit removes definitions of CONFIG_SYS_BARGSIZE defined to be
    equal to CONFIG_SYS_CBSIZE in numerous configuration files.

    We remove such definitions in two situations:

    - CONFIG_SYS_CBSIZE is otherwise not defined in the board
    configuration file, which means the default value of
    CONFIG_SYS_CBSIZE == 256 applies. In this case, the default value
    of CONFIG_SYS_BARGSIZE == 512 (common/image.c) is suitable, as it is
    larger.

    - CONFIG_SYS_CBSIZE is defined in the board configuration file, but
    to a value equal or less than 512. In this case, the default value
    of CONFIG_SYS_BARGSIZE == 512 (common.image.c) is suitable, as it
    is equal or larger.

    Signed-off-by: Thomas Petazzoni
    Reviewed-by: Tom Rini

    Thomas Petazzoni
     
  • 1f20fc53b   include/configs: drop default definitions of CONFIG_SYS_MAXARGS ... Browse Code »

    Now that include/config_fallbacks.h define a sane fallback for
    CONFIG_SYS_MAXARGS, we can drop the definition of this constant in all
    configurations that were using the default value.

    Signed-off-by: Thomas Petazzoni
    Reviewed-by: Tom Rini

    Thomas Petazzoni
     
  • 432e39806   include/configs: drop default definitions of CONFIG_SYS_PBSIZE ... Browse Code »
    1

    Now that the fallback value of CONFIG_SYS_PBSIZE in
    include/config_fallbacks.h has been adjusted, remove its definition
    from a large number of board configuration files.

    Signed-off-by: Thomas Petazzoni
    Reviewed-by: Tom Rini

    Thomas Petazzoni
     
  • 3784c789e   include/configs: remove CONFIG_SYS_CBSIZE when the default value is used ... Browse Code »

    Now that include/config_fallbacks.h define a sane fallback for
    CONFIG_SYS_CBSIZE, we can drop the definition of this constant in all
    configurations that were using the default value.

    Signed-off-by: Thomas Petazzoni
    Reviewed-by: Tom Rini
    [trini: Drop from stih410-b2260.h]
    Signed-off-by: Tom Rini

    Thomas Petazzoni
     

08 Aug, 2017

1 commit

26 Jul, 2017

1 commit

  • 2be296538   Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig ... Browse Code »
    20

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_MMC
    CONFIG_ENV_IS_IN_NAND
    CONFIG_ENV_IS_IN_UBI
    CONFIG_ENV_IS_NOWHERE

    In fact this already exists for sunxi as a 'choice' config. However not
    all the choices are available in Kconfig yet so we cannot use that. It
    would lead to more than one option being set.

    In addition, one purpose of this series is to allow the environment to be
    stored in more than one place. So the existing choice is converted to a
    normal config allowing each option to be set independently.

    There are not many opportunities for Kconfig updates to reduce the size of
    this patch. This was tested with

    ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

    And then manual updates. This is because for CHAIN_OF_TRUST boards they
    can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
    now.

    Signed-off-by: Simon Glass
    Signed-off-by: Tom Rini

    Simon Glass
     

30 Apr, 2017

1 commit

20 Mar, 2017

1 commit

13 Feb, 2017

1 commit

  • e856bdcfb   flash: complete CONFIG_SYS_NO_FLASH move with renaming ... Browse Code »
    20

    We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is
    not completed. Finish this work by the tool.

    During this move, let's rename it to CONFIG_MTD_NOR_FLASH.
    Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH"
    than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic will
    make the code more readable. Besides, negative meaning symbols do
    not fit in obj-$(CONFIG_...) style Makefiles.

    This commit was created as follows:

    [1] Edit "default n" to "default y" in the config entry in
    common/Kconfig.

    [2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH"

    [3] Rename the instances in defconfigs by the following:
    find . -path './configs/*_defconfig' | xargs sed -i \
    -e '/CONFIG_SYS_NO_FLASH=y/d' \
    -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/'

    [4] Change the conditionals by the following:
    find . -name '*.[ch]' | xargs sed -i \
    -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \
    -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \
    -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \
    -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/'

    [5] Modify the following manually
    - Rename the rest of instances
    - Remove the description from README
    - Create the new Kconfig entry in drivers/mtd/Kconfig
    - Remove the old Kconfig entry from common/Kconfig
    - Remove the garbage comments from include/configs/*.h

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

31 Jan, 2017

1 commit

  • 54925327f   mmc: move CONFIG_GENERIC_MMC to Kconfig ... Browse Code »
    40

    Now, CONFIG_GENERIC_MMC seems equivalent to CONFIG_MMC.

    Let's create an entry for "config GENERIC_MMC" with "default MMC",
    then convert all macro defines in headers to Kconfig. Almost all
    of the defines will go away.

    I see only two exceptions:
    configs/blanche_defconfig
    configs/sandbox_noblk_defconfig

    They define CONFIG_GENERIC_MMC, but not CONFIG_MMC. Something
    might be wrong with these two boards, so should be checked later.

    Anyway, this is the output of the moveconfig tool.

    This commit was created as follows:

    [1] create a config entry in drivers/mmc/Kconfig

    [2] tools/moveconfig.py -r HEAD GENERIC_MMC

    [3] manual clean-up of garbage comments in doc/README.* and
    include/configs/*.h

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Tom Rini

    Masahiro Yamada
     

29 Jan, 2017

1 commit

28 Jan, 2017

1 commit

26 Jan, 2017

1 commit

15 Jan, 2017

1 commit

  • 70b26cd05   arm: Remove unregister MACH_TYPE_xxx uses ... Browse Code »
    26

    Before we can sync with the latest mach-types.h file from the Linux
    Kernel we need to remove some instances of MACH_TYPE_xxx from our
    sources. As these values have been removed from the canonical upstream
    source we should not be using them either, so drop.

    Cc: Tom Warren
    Cc: Lucas Stach
    Cc: Luka Perkov
    Cc: Stephen Warren
    Cc: Heiko Schocher
    Cc: Thomas Weber
    Cc: Lucile Quirion
    Cc: Matthias Weisser
    Cc: Suriyan Ramasami
    Cc: Nobuhiro Iwamatsu
    Cc: Bo Shen
    Cc: Nick Thompson
    Cc: Stefano Babic
    Cc: Erik van Luijk
    Cc: Lokesh Vutla
    Signed-off-by: Tom Rini

    Tom Rini
     

05 Jan, 2017

1 commit

30 Dec, 2016

1 commit

  • c27269953   mmc: complete unfinished move of CONFIG_MMC ... Browse Code »
    26

    Commit 7a777f6d6f35 ("mmc: Add generic Kconfig option") created
    a Kconfig entry for this option without any actual moves, then
    commit 44c798799f66 ("sunxi: Use Kconfig CONFIG_MMC") moved
    instances only for SUNXI.

    We generally do not like such partial moves. This kind of work
    is automated by tools/moveconfig.py, so it is pretty easy to
    complete this move.

    I am adding "default ARM || PPC || SANDBOX" (suggested by Tom).
    This shortens the configs and will ease new board porting.

    This commit was created as follows:

    [1] Edit Kconfig (remove the "depends on", add the "default",
    copy the prompt and help message from Linux)

    [2] Run 'tools/moveconfig.py -y -s -r HEAD MMC'

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Jaehoon Chung

    Masahiro Yamada
     

12 Oct, 2016

2 commits

13 Jun, 2016

1 commit

10 Jun, 2016

1 commit

24 May, 2016

2 commits

  • e96b6ee7b   ts4800: add CONFIG_SYS_FSL_ERRATUM_ESDHC_A001 ... Browse Code »

    This commit fixes the MMC data transactions timeout problem on the
    TS4800.

    The changes introduced in the commit e978a31 on the timeout calculation
    for the MMC data transactions has revealed there is something wrong with
    the timeout setting of the eSDHC controller used in the IMX51.

    The IMX51 seems to be concerned by this erratum and without this change
    the MMC driver is unable to do any transactions.

    Signed-off-by: Sebastien Bourdelin
    Reviewed-by: Fabio Estevam

    Sebastien Bourdelin
     
  • e453794f8   ts4800: update environment to boot with device tree ... Browse Code »

    This commit updates the environment variables to be able to boot with a
    device tree. The expected partition layout on the SD card is:
    - partition 1: type 0xDA, contains u-boot.bin
    - partition 2: type 0xC (fat), contains zImage and device tree
    - partition 3: type 0x83, root filesystem.

    Signed-off-by: Damien Riegel

    Damien Riegel
     

26 Apr, 2016

3 commits

15 Mar, 2016

1 commit

06 Feb, 2016

1 commit

  • a187559e3   Use correct spelling of "U-Boot" ... Browse Code »

    Correct spelling of "U-Boot" shall be used in all written text
    (documentation, comments in source files etc.).

    Signed-off-by: Bin Meng
    Reviewed-by: Heiko Schocher
    Reviewed-by: Simon Glass
    Reviewed-by: Minkyu Kang

    Bin Meng
     

30 Oct, 2015

1 commit

25 Oct, 2015

1 commit

  • 09f3ca3dd   arm, powerpc: select SYS_GENERIC_BOARD ... Browse Code »

    We have finished Generic Board conversion for ARM and PowerPC, i.e.
    all the boards have been converted except OpenRISC, SuperH, SPARC,
    which have not supported Generic Board framework yet.

    Select SYS_GENERIC_BOARD in arch/Kconfig and delete all the macro
    defines in include/configs/*.h.

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

02 Sep, 2015

2 commits

  • f3488bb39   ARM: ts4800: add ethernet support ... Browse Code »

    This commit adds ethernet support to the TS4800. Note that the
    MAC address is not fused on this board and have to be read from
    FEC PALR PAUR registers (this is how the kernel provided by
    Technologic Systems does it).

    signed-off-by: Damien Riegel
    Cc: Stefano Babic

    Damien Riegel
     
  • 9ee16897a   ARM: ts4800: add basic board support ... Browse Code »

    This commit adds basic support including:
    MMC, Serial console, TS4800 watchdog

    The config use CONFIG_SKIP_LOWLEVEL_INIT as U-boot is used as a second
    stage bootloader.

    Signed-off-by: Lucile Quirion
    signed-off-by: Damien Riegel
    Cc: Stefano Babic

    Lucile Quirion