Eric Lee / smarc-uboot

28 Feb, 2018

1 commit

06 Feb, 2018

1 commit

  • a4fa81146   cmd: Make CONFIG_CMD_FPGA depend on CONFIG_FPGA ... Browse Code »

    cmd/Makefile has:

    ifdef CONFIG_FPGA
    obj-$(CONFIG_CMD_FPGA) += fpga.o
    endif

    which means that if CONFIG_FPGA is not set, CONFIG_CMD_FPGA silently
    does nothing. Let's remove that Makefile conditional and instead express
    this equivalent dependency in Kconfig, so a lot of redundant

    # CONFIG_CMD_FPGA is not set

    can be removed from board defconfigs that don't actually have an FPGA.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

23 Jan, 2018

2 commits

31 Oct, 2017

1 commit

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

28 Aug, 2017

1 commit

15 Aug, 2017

1 commit

14 Aug, 2017

1 commit

05 Aug, 2017

1 commit

26 Jul, 2017

1 commit

  • 2be296538   Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig ... Browse Code »
    20

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_MMC
    CONFIG_ENV_IS_IN_NAND
    CONFIG_ENV_IS_IN_UBI
    CONFIG_ENV_IS_NOWHERE

    In fact this already exists for sunxi as a 'choice' config. However not
    all the choices are available in Kconfig yet so we cannot use that. It
    would lead to more than one option being set.

    In addition, one purpose of this series is to allow the environment to be
    stored in more than one place. So the existing choice is converted to a
    normal config allowing each option to be set independently.

    There are not many opportunities for Kconfig updates to reduce the size of
    this patch. This was tested with

    ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

    And then manual updates. This is because for CHAIN_OF_TRUST boards they
    can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
    now.

    Signed-off-by: Simon Glass
    Signed-off-by: Tom Rini

    Simon Glass
     

19 Jun, 2017

1 commit

28 Apr, 2017

1 commit

19 Mar, 2017

1 commit

  • 3a649407a   arm: Migrate SYS_THUMB_BUILD to Kconfig, introduce SPL_SYS_THUMB_BUILD ... Browse Code »
    20

    Today, we have cases where we wish to build all of U-Boot in Thumb2 mode for
    various reasons. We also have cases where we only build SPL in Thumb2 mode due
    to size constraints and wish to build the rest of the system in ARM mode. So
    in this migration we introduce a new symbol as well, SPL_SYS_THUMB_BUILD to
    control if we build everything or just SPL (or in theory, just U-Boot) in
    Thumb2 mode.

    Signed-off-by: Tom Rini
    Acked-by: Siarhei Siamashka

    Tom Rini
     

11 Jan, 2017

1 commit

  • 1d2c0506d   mmc: move more driver config options to Kconfig ... Browse Code »

    Move (and rename) the following CONFIG options to Kconfig:

    CONFIG_DAVINCI_MMC (renamed to CONFIG_MMC_DAVINCI)
    CONFIG_OMAP_HSMMC (renamed to CONFIG_MMC_OMAP_HS)
    CONFIG_MXC_MMC (renamed to CONFIG_MMC_MXC)
    CONFIG_MXS_MMC (renamed to CONFIG_MMC_MXS)
    CONFIG_TEGRA_MMC (renamed to CONFIG_MMC_SDHCI_TEGRA)
    CONFIG_SUNXI_MMC (renamed to CONFIG_MMC_SUNXI)

    They are the same option names as used in Linux.

    This commit was created as follows:

    [1] Rename the options with the following command:

    find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
    -type f -print | xargs sed -i -e '
    s/CONFIG_DAVINCI_MMC/CONFIG_MMC_DAVINCI/g
    s/CONFIG_OMAP_HSMMC/CONFIG_MMC_OMAP_HS/g
    s/CONFIG_MXC_MMC/CONFIG_MMC_MXC/g
    s/CONFIG_MXS_MMC/CONFIG_MMC_MXS/g
    s/CONFIG_TEGRA_MMC/CONFIG_MMC_SDHCI_TEGRA/g
    s/CONFIG_SUNXI_MMC/CONFIG_MMC_SUNXI/g
    '

    [2] Commit the changes

    [3] Create entries in driver/mmc/Kconfig.
    (copied from Linux)

    [4] Move the options with the following command
    tools/moveconfig.py -y -r HEAD \
    MMC_DAVINCI MMC_OMAP_HS MMC_MXC MMC_MXS MMC_SDHCI_TEGRA MMC_SUNXI

    [5] Sort and align drivers/mmc/Makefile for readability

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Marek Vasut

    Masahiro Yamada
     

04 Dec, 2016

1 commit

24 Oct, 2016

4 commits

10 Jun, 2016

1 commit

26 Apr, 2016

3 commits

22 Nov, 2015

1 commit

19 Nov, 2015

1 commit

28 Sep, 2015

1 commit

13 Aug, 2015

1 commit

  • 181bd9dc6   kconfig: add config option for shell prompt ... Browse Code »
    102

    Add option to set shell prompt string from menuconfig and migrate
    boards globally.

    The migration is done as follows:
    - Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the
    entry moved to their defconfig files.
    - Boards that defined some kind of #ifdef logic which selects the
    CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT
    right before the #ifdef logic and were left alone.
    - This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus
    CONFIG_SYS_PROMPT was removed from all _common.h and _common.h
    files. This results in a streamlined default value across platforms, and
    includes the following files: spear-common, sunxi-common, mv-common,
    ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common.
    - Boards that relied on _common.h values of CONFIG_SYS_PROMPT were
    not updated in their respective defconfig files under the assumption that
    since they did not explicitly define a value, they're fine with whatever
    the default is.
    - On the other hand, boards that relied on a value defined in some
    _common.h file such as woodburn_common, rpi-common,
    bur_am335x_common, ls2085a_common, siemens_am33x_common, and
    omap3_evm_common, had their values moved to the respective defconfig files.
    - The define V_PROMPT was removed, since it is not used anywhere except for
    assigning a value for CONFIG_SYS_PROMPT.

    Cc: Tom Rini
    Cc: Masahiro Yamada
    Cc: Stefano Babic
    Cc: Igor Grinberg
    Signed-off-by: Nikita Kiryanov
    [trini: Add spring, sniper, smartweb to conversion]
    Signed-off-by: Tom Rini

    Nikita Kiryanov
     

26 Jun, 2015

1 commit

09 Jun, 2015

1 commit

  • d126e0164   autoboot.c: Move config options to Kconfig ... Browse Code »

    This patch moves the following config options to Kconfig:

    CONFIG_AUTOBOOT_KEYED
    CONFIG_AUTOBOOT_PROMPT
    CONFIG_AUTOBOOT_DELAY_STR
    CONFIG_AUTOBOOT_STOP_STR
    AUTOBOOT_KEYED_CTRLC

    Signed-off-by: Stefan Roese
    Reviewed-by: Simon Glass
    [trini: Drop ip04 and pm9263 configs/ additions, those boards previously
    set CONFIG_AUTOBOOT_PROMPT but never used it, re-run savedefconfig over
    all boards that did change. Make digsy_mtc_* string include seconds to
    match others and not warn. ]
    Signed-off-by: Tom Rini
    Cc: Masahiro Yamada

    Stefan Roese
     

19 Apr, 2015

1 commit

  • 58d423b88   dm: select CONFIG_DM* options ... Browse Code »

    As mentioned in the previous commit, adding default values in each
    Kconfig causes problems because it does not co-exist with the
    "depends on" syntax. (Please note this is not a bug of Kconfig.)
    We should not do so unless we have a special reason. Actually,
    for CONFIG_DM*, we have no good reason to do so.

    Generally, CONFIG_DM is not a user-configurable option. Once we
    convert a driver into Driver Model, the board only works with Driver
    Model, i.e. CONFIG_DM must be always enabled for that board.
    So, using "select DM" is more suitable rather than allowing users to
    modify it. Another good thing is, Kconfig warns unmet dependencies
    for "select" syntax, so we easily notice bugs.

    Actually, CONFIG_DM and other related options have been added
    without consistency: some into arch/*/Kconfig, some into
    board/*/Kconfig, and some into configs/*_defconfig.

    This commit prefers "select" and cleans up the following issues.

    [1] Never use "CONFIG_DM=n" in defconfig files

    It is really rare to add "CONFIG_FOO=n" to disable CONFIG options.
    It is more common to use "# CONFIG_FOO is not set". But here, we
    do not even have to do it.
    Less than half of OMAP3 boards have been converted to Driver Model.
    Adding the default values to arch/arm/cpu/armv7/omap3/Kconfig is
    weird. Instead, add "select DM" only to appropriate boards, which
    eventually eliminates "CONFIG_DM=n", etc.

    [2] Delete redundant CONFIGs

    Sandbox sets CONFIG_DM in arch/sandbox/Kconfig and defines it again
    in configs/sandbox_defconfig.
    Likewise, OMAP3 sets CONFIG_DM arch/arm/cpu/armv7/omap3/Kconfig and
    defines it also in omap3_beagle_defconfig and devkit8000_defconfig.

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

28 Mar, 2015

2 commits

13 Feb, 2015

2 commits

31 Aug, 2014

1 commit

30 Jul, 2014

1 commit

  • dd84058d2   kconfig: add board Kconfig and defconfig files ... Browse Code »

    This commit adds:
    - arch/${ARCH}/Kconfig
    provide a menu to select target boards
    - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
    set CONFIG macros to the appropriate values for each board
    - configs/${TARGET_BOARD}_defconfig
    default setting of each board

    (This commit was automatically generated by a conversion script
    based on boards.cfg)

    In Linux Kernel, defconfig files are located under
    arch/${ARCH}/configs/ directory.
    It works in Linux Kernel since ARCH is always given from the
    command line for cross compile.

    But in U-Boot, ARCH is not given from the command line.
    Which means we cannot know ARCH until the board configuration is done.
    That is why all the "*_defconfig" files should be gathered into a
    single directory ./configs/.

    Signed-off-by: Masahiro Yamada
    Acked-by: Simon Glass

    Masahiro Yamada