Eric Lee / smarc-uboot

23 Jan, 2020

1 commit

05 Dec, 2019

2 commits

04 Dec, 2019

1 commit

21 Nov, 2019

1 commit

  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

23 Sep, 2019

1 commit

26 Aug, 2019

2 commits

  • c680df7e8   mtd: nand: raw: Move CONFIG_SYS_NAND_USE_FLASH_BBT to Kconfig ... Browse Code »

    Convert CONFIG_SYS_NAND_USE_FLASH_BBT to Kconfig, update defconfigs,
    headers and whitelist.

    Please note that this symbol already was used in Kconfig
    (imply in CONFIG_NAND_ATMEL) which did not work, since this symbol was
    not available in Kconfig. This changes now with this patch and all
    boards with CONFIG_NAND_ATMEL will have BBT enabled. Which is what
    I also need on my GARDENA AT91SAM based board.

    Signed-off-by: Stefan Roese
    Cc: Eugen Hristev
    Cc: Miquel Raynal
    Cc: Gregory CLEMENT
    [trini: Rework such that the configs are unchanged to start with]
    Signed-off-by: Tom Rini

    Stefan Roese
     
  • 1bf330150   Convert CONFIG_ARCH_CPU_INIT to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_ARCH_CPU_INIT

    Signed-off-by: Adam Ford
    Acked-by: Chris Packham
    Tested-by: Felix Brack

    Adam Ford
     

09 Jul, 2019

1 commit

  • a9221f3eb   at91, omap2plus: configs: migrate CONFIG_ENV_ to defconfigs ... Browse Code »
    12

    Enable the extended ENV options for AT91 and OMAP2PLUS in order to be
    able to use CONFIG_ENV_UBI_* on these architectures.

    As this change also makes the configs ENV_SIZE, ENV_SECT_SIZE,
    ENV_OFFSET visible to AT91 and OMAP2PLUS, migrate users of these to
    KConfig.

    This migration was run using an extended moveconfig.py which evaluates
    expressions such as "(512 << 10)". See patch ("moveconfig: expand
    simple expressions").

    All modified boards were built with SOURCE_DATE_EPOCH=0 before and
    after the change and successfully confirmed that the identical binary
    is generated (the only exception was igep00x0, which does not define
    CONFIG_ENV_IS_IN_UBI in the original board header. Once that is
    defined, the test passes too).

    hs: rebased patch to:
    68b90e57bc: "configs: tinker-rk3288 disable CONFIG_SPL_I2C_SUPPORT"

    Signed-off-by: Markus Klotzbuecher
    Cc: Heiko Schocher
    Cc: Eugen Hristev
    Cc: Tom Rini

    Markus Klotzbuecher
     

30 Apr, 2019

2 commits

04 Mar, 2019

1 commit

08 Feb, 2019

1 commit

01 Feb, 2019

1 commit

26 Jan, 2019

1 commit

  • b8fea5e8d   atmel: add CMD_FS_GENERIC to SAMA5D3 for EFI boot ... Browse Code »

    I'm working on getting OpenBSD to run on the Atmel SAMA5D3 Xplained.
    OpenBSD uses an EFI bootloader, which requires the "load" command to
    work, since "fatload" doesn't initialize the EFI memory addresses
    properly. To get "load" on the SAMA5D3 version of U-Boot, I propose
    adding the CONFIG_CMD_FS_GENERIC option.

    Signed-off-by: Greg Czerniak

    Greg Czerniak
     

21 Jan, 2019

1 commit

  • 49ad40298   ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig ... Browse Code »
    25

    This commit converts the following items to Kconfig:

    CONFIG_ATMEL_NAND_HWECC
    CONFIG_ATMEL_NAND_HW_PMECC
    CONFIG_PMECC_CAP
    CONFIG_PMECC_SECTOR_SIZE
    CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER

    [PMECC References]
    https://www.at91.com/linux4sam/bin/view/Linux4SAM/PmeccConfigure
    https://www.at91.com/linux4sam/bin/view/Linux4SAM/AT91Bootstrap

    [Mailing List Thread]
    https://lists.denx.de/pipermail/u-boot/2018-December/350666.html

    Fixes: 5541543f ("configs: at91: Remove CONFIG_SYS_EXTRA_OPTIONS assignment")
    [trini: Make the migration be size neutral and possibly not fix the
    above in all cases]
    Reported-by: Daniel Evans
    Cc: Eugen Hristev
    Signed-off-by: Derald D. Woods
    Signed-off-by: Tom Rini

    Derald D. Woods
     

14 Nov, 2018

1 commit

  • cbabe7f87   configs: Migrate and re-enabled CONFIG_CMD_MTDPARTS ... Browse Code »

    Now that CMD_UBI does not select CMD_MTDPARTS we need to make platforms
    that had been enabling it turn it on by hand. This exposed that we had
    not yet migrated CMD_MTDPARTS fully, so do so now.

    Fixes: 86dfa556d927 ("cmd: ubi: Remove useless call to mtdparts_init()")
    Signed-off-by: Tom Rini

    Tom Rini
     

22 Oct, 2018

1 commit

29 Sep, 2018

2 commits

04 Sep, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

22 Jul, 2018

1 commit

04 Jun, 2018

1 commit

17 Apr, 2018

1 commit

08 Apr, 2018

1 commit

24 Feb, 2018

1 commit

  • d021e9421   Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_BOOTP_BOOTPATH
    CONFIG_BOOTP_DNS
    CONFIG_BOOTP_GATEWAY
    CONFIG_BOOTP_HOSTNAME
    CONFIG_BOOTP_PXE
    CONFIG_BOOTP_SUBNETMASK
    CONFIG_CMDLINE_EDITING
    CONFIG_AUTO_COMPLETE
    CONFIG_SYS_LONGHELP
    CONFIG_SUPPORT_RAW_INITRD
    CONFIG_ENV_VARS_UBOOT_CONFIG

    Signed-off-by: Adam Ford
    [trini: Re-run the migration]
    Signed-off-by: Tom Rini

    Adam Ford
     

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

06 Feb, 2018

1 commit

  • a4fa81146   cmd: Make CONFIG_CMD_FPGA depend on CONFIG_FPGA ... Browse Code »

    cmd/Makefile has:

    ifdef CONFIG_FPGA
    obj-$(CONFIG_CMD_FPGA) += fpga.o
    endif

    which means that if CONFIG_FPGA is not set, CONFIG_CMD_FPGA silently
    does nothing. Let's remove that Makefile conditional and instead express
    this equivalent dependency in Kconfig, so a lot of redundant

    # CONFIG_CMD_FPGA is not set

    can be removed from board defconfigs that don't actually have an FPGA.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

15 Sep, 2017

1 commit

28 Aug, 2017

1 commit

27 Aug, 2017

1 commit

15 Aug, 2017

2 commits

01 Aug, 2017

1 commit

  • 8f1a80e99   configs: Migrate CMD_NAND* ... Browse Code »

    Migrate all remaining instances of CMD_NAND, CMD_NAND_TRIMFFS
    CMD_NAND_LOCK_UNLOCK and CMD_NAND_TORTURE from the headers into the
    defconfig files.

    Tested-by: Adam Ford
    Signed-off-by: Tom Rini
    Reviewed-by: Bin Meng

    Tom Rini
     

31 Jul, 2017

1 commit

26 Jul, 2017

1 commit

19 Jun, 2017

1 commit

04 Jun, 2017

1 commit

  • 91d27a17c   Kconfig: Migrate FS_FAT / FAT_WRITE ... Browse Code »

    Now that these symbols are in Kconfig, migrate all users. Use imply on
    a number of platforms that default to having this enabled. As part of
    this we must migrate some straglers for CMD_FAT and DOS_PARTITION.

    Signed-off-by: Tom Rini

    Tom Rini