17 Nov, 2007
16 commits
-
Signed-off-by: Wolfgang Denk
-
rsdproto board support has wrong I2C frequency and wrong return value
handling.Signed-off-by: Luotao Fu
-
Apply Grant Likely's backout to MPC5121 code, too.
Pointed out by Rafal Jaworowski
Signed-off-by: Wolfgang Denk
-
Ugh. I *hate* to back this change out, but these compiler flags don't
work for relocation on all versions of GCC. I've not been able to
reproduce the environment in my setup (and hence, not been able to
find a combination that *does* work), so I've got no choice but to go
back to the old gcc flags and linker script.Signed-off-by: Grant Likely
-
This patch has been sent on:
- 29 Sep 2007Although mips_io_port_base is currently a part of IDE command, it is quite
fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move
it to MIPS general part, and introduce `set_io_port_base()' from Linux.This patch is triggered by multiple definition of `mips_io_port_base' build
error on gth2 (and tb0229 also needs this fix.)board/gth2/libgth2.a(gth2.o): In function `log_serial_char':
/home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base'
common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here
make: *** [u-boot] Error 1Signed-off-by: Shinya Kuribayashi
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD -
Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if
the most significant bit was set, which did not work on any
architecture where "char" defaulted to be an unsigned type.Based on a patch by Angelos Manousaridis
Signed-off-by: Wolfgang Denk
-
Sometimes you can't reference the DDR2 controller variables.
Signed-off-by: Jon Loeliger
-
Signed-off-by: Jason Jin
-
Basically, refactor the CFG_PIXIS_VBOOT_MASK values
into the separate board config files.Signed-off-by: Jason Jin
Signed-off-by: Jon Loeliger -
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
-
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
15 Nov, 2007
7 commits
-
This reverts commit 3649cd99ba815b6601868735765602f00ef3692b.
Signed-off-by: Grant Likely -
This reverts commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90.
Signed-off-by: Grant Likely -
This reverts commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00.
Signed-off-by: Grant Likely -
This reverts commit f3a52fe05923935db86985daf9438e2f70ac39aa.
Signed-off-by: Grant Likely -
This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96.
Signed-off-by: Grant Likely -
This reverts commit 057004f4a4863554d56cc56268bfa7c7d9738e27.
Signed-off-by: Grant Likely -
This reverts commit 8d17979d0359492a822a0a409d26e3a3549b4cd4.
Signed-off-by: Grant Likely
13 Nov, 2007
3 commits
-
Signed-off-by: Stefan Roese
-
Signed-off-by: Heiko Schocher
09 Nov, 2007
3 commits
-
Signed-off-by: TsiChungLiew
-
Signed-off-by: TsiChungLiew
-
Signed-off-by: TsiChungLiew
08 Nov, 2007
3 commits
-
Signed-off-by: TsiChungLiew
-
Signed-off-by: TsiChungLiew
-
Signed-off-by: TsiChungLiew
06 Nov, 2007
4 commits
-
This patch implements general ULi 526x Ethernet driver.
Until now, it is the only native Ethernet port on
MPC8610HPCD board, but it could be used on other boards
with ULi 526x Ethernet port as well.Signed-off-by: Roy Zang
Signed-off-by: Zhang Wei
Acked-by: Jon Loeliger
Signed-off-by: Ben Warren -
This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and
"miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which
returns non-zero iff the PHY registers are configured for 1000BASE-X. The
"mii info" command is modified to distinguish between 1000BASE-T and -X.Signed-off-by: Larry Johnson
Signed-off-by: Ben Warren -
Signed-off-by: Larry Johnson
Signed-off-by: Ben Warren
04 Nov, 2007
4 commits
-
Signed-off-by: Wolfgang Denk
-
Changed the wording to properly describe the shadowing
of the environment from ROM to RAMSigned-off-by: Bruce Adler
-
Signed-off-by: Shinya Kuribayashi
-
Signed-off-by: Vlad Lungu