28 Mar, 2010
6 commits
-
Update CHANGELOG
Signed-off-by: Wolfgang Denk
-
Signed-off-by: Wolfgang Denk
-
The ml300 board has a number of issues, but nobody cares about this
long-orphaned board any more. Remove it.Signed-off-by: Wolfgang Denk
Acked-by: Michal Simek -
The restructuring of the mkimage command in commit 89a4d6b1 ("tools:
mkimage: split code into core, default and FIT image specific")
introduced a bug that caused mkimage to segfault when run without
"-n name" option. Initialize the imagename entry to prevent that.Signed-off-by: Wolfgang Denk
25 Mar, 2010
1 commit
-
With old configuration it could happen tout=0 if CONFIG_SYS_HZ
Signed-off-by: Alessandro Rubini
Signed-off-by: Thomas Chou
Signed-off-by: Stefan Roese
24 Mar, 2010
4 commits
-
440EPx fixed bootstrap options A, B, D, and E sets PLL FWDVA to a value = 1.
This results in the PLLOUTB being greater than the CPU clock frequency
resulting unstable 440EPx operation resulting in various software hang
conditions.This patch reprograms the FWDVA satisfying the requirement of setting FWDVB
to a value greater than 1 while using one of the four deafult bootstrap options.Signed-off-by: Rupjyoti Sarmah
Acked-by : Victor Gallardo
Signed-off-by: Stefan Roese -
The soft-i2c code for AT91 defines I2C_SOFT_DECLARATIONS
for direct access by dereferencing a pio pointer.
The OTC570 platform uses the AT91 gpio API so it does not
need the pio variable.Signed-off-by: Matthias Fuchs
-
Support for 16bpp was supposed to be in the code but was not working.
This makes it work and has been tested in the nhk8815 board.Signed-off-by: Alessandro Rubini
Acked-by: Andrea Gallo
Signed-off-by: Anatolij Gustschin
23 Mar, 2010
3 commits
-
Update CHANGELOG
Signed-off-by: Wolfgang Denk
-
ep93xx timer: Make get_ticks() return a value in CONFIG_SYS_HZ resolution,
as announced by get_tbclk()Signed-off-by: Matthias Kaehlcke
-
ep93xx timer: Use 64-bit values in usecs_to_ticks() in order to avoid
overflows in intermediate valuesSigned-off-by: Matthias Kaehlcke
22 Mar, 2010
8 commits
-
Signed-off-by: Asen Dimov
-
The crc table was being built as little endian for big endian
targets. This would cause fw_printenv to always fail with
"Warning: Bad CRC, using default environment" messages.Signed-off-by: Jeff Angielski
Acked-by: Joakim Tjernlund -
Fix warnings while compiling with CONFIG_VIDEO enabled:
diu.c: In function 'video_hw_init':
diu.c:158: warning: 'return' with no value, in function returning non-void
diu.c:162: warning: format '%ld' expects type 'long int', but argument 6 has type 'int'
diu.c:162: warning: format '%ld' expects type 'long int', but argument 7 has type 'int'Signed-off-by: Anatolij Gustschin
-
If a board uses cfb_console driver and splash image
and also defines CONFIG_SILENT_CONSOLE, the user is
locked out even if "silent" is not set. It is not
possible to get any output, neither on vga console
device nor on serial console after redirecting the
output to the serial console, since the GD_FLG_SILENT
flag remains set.Fix the problem by redirecting the output from frame
buffer to serial console if splashimage is used.
Only suppress the output if "silent" environment
variable was set and don't set the GD_FLG_SILENT
flag arbitrarily.Signed-off-by: Anatolij Gustschin
-
I executed 'find . -name "*.[chS]" -perm 755 -exec chmod 644 {} \;'
Signed-off-by: Thomas Weber
Add some more: neither Makefile nor config.mk need execute permissions.
Signed-off-by: Wolfgang Denk -
Some registers of the mxcmmc driver were accessed using
16 bit accessor functions, because only the LSB is
significant. This is not needed and generates
warnings.Signed-off-by: Stefano Babic
-
So far, TFTP negotiated a fixed retransmission timeout of 5 seconds.
In some cases (busy networks, slow TFTP servers) this caused very
slow transfers. A new environment variable "tftptimeout" allows to
set this timeout. Lowering this value may make downloads succeed
faster in networks with high packet loss rates or with unreliable
TFTP servers.Signed-off-by: Wolfgang Denk
Cc: Ben Warren
Signed-off-by: Ben Warren -
Signed-off-by: FUJITA Kazutoshi
Signed-off-by:
Acked-by: Stefan Roese
21 Mar, 2010
1 commit
-
This patch removes the \n after the help message for mmcinfo.
This resulted in an empty line being displayed after the mmcinfo line
when the help command was given.Signed-off-by: Frans Meulenbroeks
17 Mar, 2010
2 commits
-
Signed-off-by: Scott McNutt
-
Signed-off-by: Scott McNutt
14 Mar, 2010
3 commits
-
The new zlib code wants asm/unaligned.h, so have the Blackfin version pull
in the asm-generic/unaligned.h.Signed-off-by: Mike Frysinger
-
This is based on the asm-arm/unaligned.h, but made generic so all arches
that cannot do unaligned accesses can utilize it.Signed-off-by: Mike Frysinger
13 Mar, 2010
4 commits
-
If a splashscreen is used the console scrolling used the
scroll size as needed when a logo was displayed. This
patch sets the scroll size to the whole screen if
a splashscreen is shown.Signed-off-by: Matthias Weisser
-
Coding style cleanup, update CHANGELOG.
Signed-off-by: Wolfgang Denk
-
Building examples/standalone/eepro100_eeprom triggers this error:
In file included from include/common.h:629,
from eepro100_eeprom.c:24:
include/net.h: In function 'NetReadIP':
include/net.h:430: warning: implicit declaration of function 'memcpy'
eepro100_eeprom.c: At top level:
eepro100_eeprom.c:81: error: conflicting types for 'memcpy'
include/net.h:430: error: previous implicit declaration of 'memcpy' was hereFix this.
Signed-off-by: Wolfgang Denk
-
Signed-off-by: Wolfgang Denk
12 Mar, 2010
8 commits
-
This code has compile problems and the company does not even exist any
more. So we take the liberty to drop support for it.Signed-off-by: Detlev Zundel
CC: Wolfgang Denk
CC: Ben Warren -
The 36-bit build exceeds the 512k size we have. Removing FIT type image
support allows us to fit and we dont really use it.Signed-off-by: Kumar Gala
-
Signed-off-by: Michael Zaidman
-
The length of configured MTDPARTS_DEFAULT string
could be greater than console printbuffer size.
Replace printf() by puts() to avoid potential buffer
overflows.Signed-off-by: Anatolij Gustschin
-
This patch corrects small mistake in the register list in
doc/README.mpc8536ds. These registers are 32 bits and this one starts
at ....c not ....eWhen using the ...c address I can boot from sd, when using the ...e
address I cannot.Signed-off-by: Frans Meulenbroeks
Acked-by: Hu Mingkai -
Signed-off-by: Heiko Schocher
-
Also enable support for CONFIG_HWCONFIG because we use this for
configuring if this hardware has a FEC or not.syntax:
hwconfig=fec:on if hardware has an fec
hwconfig=fec:off if hardware has no fecSigned-off-by: Heiko Schocher
Signed-off-by: Wolfgang Denk -
Also use hwconfig to configure whether the board has a FEC or not.
We then can adjust the DTS to tell Linux if there is a FEC present.syntax:
hwconfig=fec:on if hardware has a FEC
hwconfig=fec:off if hardware has no FECSigned-off-by: Heiko Schocher
Signed-off-by: Wolfgang Denk
