03 Jun, 2011
2 commits
-
Signed-off-by: Wolfgang Denk
-
Signed-off-by: Wolfgang Denk
02 Jun, 2011
17 commits
-
All data in dtb is big endian. Some ARM devices are little-endian.
In print_data(), it displays data with big-endian format. For ARM device,
data should be converted to little-endian first.Signed-off-by: Haojian Zhuang
Cc: Gerald Van Baren -
When we use the ntpserverip environment variable argv[1] may not be set.
Printing the error message using the NetNtpServerIP variable ensures the
correct output in both cases.Signed-off-by: Luuk Paulussen
Acked-by: Chris Packham
Cc: Ben Warren
Acked-by: Detlev Zundel -
The status polling can take a while, so make sure we kick the
watchdog after each successful poll.Signed-off-by: Patrick Sestier
Signed-off-by: Mike Frysinger -
At least on ARM the ipaddr is only set in board_init_r function. The
problem is if ipaddr is not defined in environment importing another
environment defined don't update the ipaddr value.For example, suppose we've a default environment without net variables
defined and we want to import an uEnv.txt environment from SD-card like
this:ipaddr=192.168.2.240
netmask=255.255.255.0
gatewayip=192.168.2.1
serverip=192.168.2.114Then if you try boot from NFS results in:
Importing environment from mmc ...
Running uenvcmd ...
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC ac:de:48:00:00:00
*** ERROR: `ipaddr' not setThe ipaddr at this point is NULL beacause is only set at board_init_r
function. This patch updates the ipaddr value if the environment has
changed.Signed-off-by: Enric Balletbo i Serra
Acked-by: Mike Frysinger -
* 'master' of /home/wd/git/u-boot/custodians:
sh: sh7785lcr: Update BSC of USB area -
* 'master' of git://git.denx.de/u-boot-sh:
sh: sh7785lcr: Update BSC of USB area -
* 'master' of /home/wd/git/u-boot/custodians:
SMDKV310: Fix incorrect conditional compilation for MIU linear mapping
SMDKV310: CPU fequency and mmc_pre_ratio modified
armv7: Add support for ST-Ericsson U8500 href platform
I2C: Add driver for ST-Ericsson U8500 i2c
armv7: Add ST-Ericsson u8500 arch
Kirkwood: boards cleanup for deprecated CONFIG_CMD_AUTOSCRIPT
ARMV7: Vexpress: Add missing MMC header
arm/km: update mgcoge3un board support
mvgbe: enable configurability of PORT_SERIAL_CONTROL_VALUE
arm/km: rename mgcoge2un to mgcoge3un
arm/km: add second serial interface for kirkwood
arm/km: disable ls (through jffs2 support)
arm/km: introduce bootcount env variable and clean km_arm
arm/km: move CONFIG_EXTRA_ENV_SETTINGS from board to km_arm file
arm/km: remove CONFIG_SYS_KWD_CONFIG from keymile-common.h
ARMV7: MMC SPL Boot support for SMDKV310 board
ARMV7: Add support for Samsung SMDKV310 Board
S5PC2XX: clock: support pwm clock for evt1 (cpu revision 1)
S5P: add set_mmc_clk for external clock control
S5PC2XX: Support the cpu revision
S5P:SROM config code moved to s5p-common directory
Add _end for the end of u-boot image for SMDK6400
MMC S5P: Fix typo
S5P: GPIO Macro Values Corrected.
SMDK2410: various cleanup/code style fixes
SMDK2410: use the CFI driver (and remove the old one)
SMDK2410: remove unneeded config.mk
SMDK2410: activate ARM relocation feature
BeagleBoard: fixed typo in typecast
mvsata: issue hard reset on initialization
VCMA9: use ARM relocation feature to fix build error
MX31: drop warnings due to missing prototype for mxc_watchdog_reset()
MX5: drop config.mk from efikamx board
MX31: Make get_reset_cause() static and drop unreachable code
MX53: Remove CONFIG_SYS_BOOTMAPSZ from mx53 config files.
MX53: Handle silicon revision 2.1 case
mx5: board: code clean up for checkboard code
MX51: vision2: Fix build for vision2 board.
MX51: vision: Let video mode struct be independant of watchdog.
MX53: Add initial support for MX53SMD board.
MX53: support for freescale MX53LOCO board
mx5: Fix CONFIG_OF_LIBFDT redefined warning
mx5: Remove unnecessary CONFIG_SYS_BOOTMAPSZ definition
mx31pdk: Clean up mx31pdk.h file -
* 'master' of git://git.denx.de/u-boot-arm:
SMDKV310: Fix incorrect conditional compilation for MIU linear mapping
SMDKV310: CPU fequency and mmc_pre_ratio modified
armv7: Add support for ST-Ericsson U8500 href platform
I2C: Add driver for ST-Ericsson U8500 i2c
armv7: Add ST-Ericsson u8500 arch
Kirkwood: boards cleanup for deprecated CONFIG_CMD_AUTOSCRIPT
ARMV7: Vexpress: Add missing MMC header
arm/km: update mgcoge3un board support
mvgbe: enable configurability of PORT_SERIAL_CONTROL_VALUE
arm/km: rename mgcoge2un to mgcoge3un
arm/km: add second serial interface for kirkwood
arm/km: disable ls (through jffs2 support)
arm/km: introduce bootcount env variable and clean km_arm
arm/km: move CONFIG_EXTRA_ENV_SETTINGS from board to km_arm file
arm/km: remove CONFIG_SYS_KWD_CONFIG from keymile-common.h
ARMV7: MMC SPL Boot support for SMDKV310 board
ARMV7: Add support for Samsung SMDKV310 Board
S5PC2XX: clock: support pwm clock for evt1 (cpu revision 1)
S5P: add set_mmc_clk for external clock control
S5PC2XX: Support the cpu revision
S5P:SROM config code moved to s5p-common directory
Add _end for the end of u-boot image for SMDK6400
MMC S5P: Fix typo
S5P: GPIO Macro Values Corrected.
SMDK2410: various cleanup/code style fixes
SMDK2410: use the CFI driver (and remove the old one)
SMDK2410: remove unneeded config.mk
SMDK2410: activate ARM relocation feature
BeagleBoard: fixed typo in typecast
mvsata: issue hard reset on initialization
VCMA9: use ARM relocation feature to fix build error
MX31: drop warnings due to missing prototype for mxc_watchdog_reset()
MX5: drop config.mk from efikamx board
MX31: Make get_reset_cause() static and drop unreachable code
MX53: Remove CONFIG_SYS_BOOTMAPSZ from mx53 config files.
MX53: Handle silicon revision 2.1 case
mx5: board: code clean up for checkboard code
MX51: vision2: Fix build for vision2 board.
MX51: vision: Let video mode struct be independant of watchdog.
MX53: Add initial support for MX53SMD board.
MX53: support for freescale MX53LOCO board
mx5: Fix CONFIG_OF_LIBFDT redefined warning
mx5: Remove unnecessary CONFIG_SYS_BOOTMAPSZ definition
mx31pdk: Clean up mx31pdk.h file -
* 'master' of /home/wd/git/u-boot/custodians:
powerpc/fsl_pci: Fix device tree fixups for newer platforms -
* 'master' of git://git.denx.de/u-boot-mpc85xx:
powerpc/fsl_pci: Fix device tree fixups for newer platforms -
* 'master' of /home/wd/git/u-boot/custodians:
cmd_nand: fix help of nand erase subcommand
env_nand: zero-initialize variable nand_erase_options -
Drop wepep250 board from MAINTAINERS and add all these three boards to
doc/README.scrapyardSigned-off-by: Marek Vasut
-
Fix the incorrect macro check for MIU linear mapping conditional compilation.
Signed-off-by: Thomas Abraham
Acked-by: Minkyu Kang -
Modifies CPU Frequency to 1GHz and removes hard coding of mmc_pre_ratio for
MMC Channel2 in FSYS2 register.Signed-off-by: Chander Kashyap
Acked-by: Minkyu Kang -
Minimal platform support to boot linux from SD.
Supported devices/hw limited to external MMC/SD slot,
GPIO, I2C and minimal PRCMU.Signed-off-by: John Rigby
CC: Albert Aribaud -
Signed-off-by: John Rigby
CC: Heiko Schocher -
Based on ST-Ericsson internal git repo.
Signed-off-by: Mathieu Poirier
Signed-off-by: John Rigby
CC: Albert Aribaud
01 Jun, 2011
11 commits
-
A value of BSC of the USB was wrong.
This updates this.Signed-off-by: Nobuhiro Iwamatsu
-
Add a header file with the missing function prototype to fix
ca9x4_ct_vxp.c: In function 'cpu_mmc_init':
ca9x4_ct_vxp.c:93: warning: implicit declaration of function 'arm_pl180_mmci_init'introduced by commit "ARMV7: Vexpress: Add MMC support"
(f0c64526b7e51ba997a0f1baf9e74e6d497b957e)Signed-off-by: Dirk Behme
CC: Andy Fleming
CC: Matt Waddel -
We change default settings for egiga on mgcoge3un.
The reason we need this is that we have the gig port on mgcoge3un
connected using a back-to-back pair of PHYs. There are no magnetics and
because of that the port has to be run with a fixd configuration and
auto-negotiation must be disabled. In the default mode the egiga driver
uses autoneg to determine port speed - which defaults to 1G (we need
100M full duplex).Add wait for the GPIO line connected to mgcoge3ne before
starting mgcoge3un. A board specific ethernet present function
was added, because on this board ethernet is always present.
The BOCO FPGA access was enhanced and changed to use register
definitions.Signed-off-by: Holger Brunck
Signed-off-by: Valentin Longchamp
Acked-by: Heiko Schocher
cc: Wolfgang Denk
cc: Detlev Zundel
cc: Prafulla Wadaskar -
This allows this configuration to be defined differently for some
boards that request it.Signed-off-by: Valentin Longchamp
cc: Holger Brunck
cc: Heiko Schocher
cc: Wolfgang Denk
cc: Detlev Zundel
cc: Prafulla Wadaskar -
The mgcoge2un target was only an intermediate step to mgcoge3un.
For this reason the mgcoge2un support was moved to mgcoge3un,
because it isn't needed to support both targets.We add the BootROM init file for the mgcoge3un memphis RAM.
We also move the suen3 and suen8 boards into the correct category
in the MAINTAINERS file.Signed-off-by: Valentin Longchamp
Signed-off-by: Holger Brunck
Acked-by: Heiko Schocher
cc: Wolfgang Denk
cc: Detlev Zundel
cc: Prafulla Wadaskar -
Signed-off-by: Holger Brunck
Signed-off-by: Valentin Longchamp
Acked-by: Heiko Schocher
cc: Wolfgang Denk
cc: Detlev Zundel
cc: Prafulla Wadaskar -
This is not supported on our km-arm boards since we have defined
CONFIG_SYS_NO_FLASH for our NAND Flash chip.With CONFIG_CMD_JFFS2, the ls command is present and works very badly
on our km-arm boards.Signed-off-by: Valentin Longchamp
Signed-off-by: Holger Brunck
Acked-by: Heiko Schocher
Acked-by: Prafulla Wadaskar
cc: Wolfgang Denk
cc: Detlev Zundel -
This environment variable is used to set the bootcount address
for the kernel.last_stage_init is not available for arm platforms. So the
calls to set_km_var and set_bootcount_addr are done in
misc_init_r.Additionally some unneeded printouts were removed.
Signed-off-by: Valentin Longchamp
Signed-off-by: Holger Brunck
Acked-by: Heiko Schocher
cc: Wolfgang Denk
cc: Detlev Zundel
cc: Prafulla Wadaskar -
Since all the boards define the same env settings, this simplifies
the board files.Signed-off-by: Valentin Longchamp
cc: Holger Brunck
cc: Heiko Schocher
cc: Wolfgang Denk
cc: Detlev Zundel
cc: Prafulla Wadaskar -
This define is marvell specific, so it should be present in km_arm.
It is however not needed there either, since we set it to the default
value that is already set in include/asm/arch-kirkwood/config.hSigned-off-by: Valentin Longchamp
cc: Holger Brunck
cc: Prafulla Wadaskar
cc: Heiko Schocher
cc: Wolfgang Denk
cc: Detlev Zundel
26 May, 2011
10 commits
-
Added MMC SPL boot support for SMDKV310. This framework design is
based on nand_spl support.Signed-off-by: Chander Kashyap
Signed-off-by: Minkyu Kang -
SMDKV310 board is based on Samsung S5PV310 SOC. This SOC is very much
similar to S5PC210.Signed-off-by: Chander Kashyap
Signed-off-by: Tushar Behera
Signed-off-by: Minkyu Kang -
The source of pwm clock is fixed at evt1.
And some registers for pwm clock are removed.Signed-off-by: Minkyu Kang
-
This patch added set_mmc_clk for external clock control.
c210 didn't support host clock control.
So We need external_clock_control function for c210.Signed-off-by: Jaehoon Chung
Signed-off-by: Minkyu Kang
Signed-off-by: Kyungmin Park -
S5PC210 SoC have two cpu revisions, and have some difference.
So, support the cpu revision for each revision.Signed-off-by: Minkyu Kang
Signed-off-by: Kyungmin Park -
SROM config code is made common for S5P series of boards.
smdkc100.c now refers to s5p-common/sromc.c for SROM related
subroutines.Signed-off-by: Chander Kashyap
Signed-off-by: Minkyu Kang -
Since we rename _end to __bss_end__, But we need add _end symbol for
the end of u-boot image.Signed-off-by: Zhong Hongbo
Signed-off-by: Minkyu Kang -
Fix typo resulting in the compilation error
s5p_mmc.c: In function 's5p_mmc_initialize':
s5p_mmc.c:469: error: 'struct mmc' has no member named 'm_bmax'introduced by commit "MMC: make b_max unconditional"
(8feafcc49c0b7a9c541904f95a43dbef2fecc38b)Signed-off-by: Dirk Behme
CC: John Rigby
CC: Andy Fleming
Signed-off-by: Minkyu Kang -
S5PC2XX: Macro values for Pull Up and Driver Strength were wrong.
S5PC1XX: Macro values for Driver Strength were wrong.Signed-off-by: Chander Kashyap
Signed-off-by: Minkyu Kang -
Signed-off-by: David Müller
Signed-off-by: Minkyu Kang
