12 Apr, 2016
3 commits
-
This line is not needed, as the board supports DT based probing. And
here the "Model:" is already printed:Model: Marvell Armada XP theadorable
Board: theadorableOne line for the board name is enough.
Signed-off-by: Stefan Roese
-
Sometimes the PCIe link for the PEX-switch will not come-up. In this case,
the board is not in a usable state. This patch makes sure that in this
case a soft-reset is issued. If this soft-reset does not result in the
PEX-switch being detected after some soft-reset cycles, an I2C message
is sent to the uC to issue a complete power-cycle of the board.Signed-off-by: Stefan Roese
-
This patch adds an USB power toggle for theadorable. Additionally, the
USB PHY RX Channel Control 0 Register is changed to fix some issues
noticed while accessing some specific USB sticks.Signed-off-by: Stefan Roese
24 Mar, 2016
1 commit
-
This patch adds support for Altera StratixV bitstream programming. 2 FPGAs
are connected to the SPI busses. This patch uses board specific write
code to program the bitstream via SPI direct write mode.Signed-off-by: Stefan Roese
Cc: Luka Perkov
Signed-off-by: Stefan Roese
27 Jan, 2016
1 commit
-
This patch adds support for the Armada XP (MV78260) based theadorable
board. Its equipped with onboard DDR3, UART, ethernet, I2C, SPI NOR,
LCD and SATA (SSD) interfaces / devices.Two defconfigs are added:
theadorable_defconfig:
The production U-Boot version with a stripped down drivers and feature
list. This removes networking, USB and PCI support.theadorable_debug_defconfig:
The debugging / testing U-Boot version with full support for all drivers.Signed-off-by: Stefan Roese
Cc: Luka Perkov
Signed-off-by: Stefan Roese