16 Sep, 2014
1 commit
-
Linux 3.17-rc5
Signed-off-by: Felipe Balbi
Conflicts:
Documentation/devicetree/bindings/usb/mxs-phy.txt
drivers/usb/phy/phy-mxs-usb.c
03 Sep, 2014
1 commit
-
Add imx6sx support
Signed-off-by: Peter Chen
Signed-off-by: Felipe Balbi
28 Aug, 2014
1 commit
-
This adds support for the USB PHY in Vybrid VF610. We assume that
the disconnection without VBUS is also needed for Vybrid.Tests showed, without MXS_PHY_NEED_IP_FIX, enumeration of devices
behind a USB Hub fails with errors:[ 215.163507] usb usb1-port1: cannot reset (err = -32)
[ 215.170498] usb usb1-port1: cannot reset (err = -32)
[ 215.185120] usb usb1-port1: cannot reset (err = -32)
[ 215.191345] usb usb1-port1: cannot reset (err = -32)
[ 215.202487] usb usb1-port1: cannot reset (err = -32)
[ 215.207718] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
[ 215.219317] usb usb1-port1: unable to enumerate USB deviceHence we also enable the MXS_PHY_NEED_IP_FIX flag.
Acked-by: Peter Chen
Signed-off-by: Stefan Agner
Signed-off-by: Felipe Balbi
06 Mar, 2014
9 commits
-
After clear portsc.phcd, PHY needs 200us stable time for switch
32K clock to AHB clock.Signed-off-by: Peter Chen
Signed-off-by: Felipe Balbi -
We need this to keep PHY's power on or off during the system
suspend mode. If we need to enable USB wakeup, then we
must keep PHY's power being on during the system suspend mode.
Otherwise, we need to keep PHY's power being off to save power.Signed-off-by: Peter Chen
Signed-off-by: Felipe Balbi -
When we need the PHY can be waken up by external signals,
we can call this API. Besides, we call mxs_phy_disconnect_line
at this API to close the connection between USB PHY and
controller, after that, the line state from controller is SE0.
Once the PHY is out of power, without calling mxs_phy_disconnect_line,
there are unknown wakeups due to dp/dm floating at device mode.Signed-off-by: Peter Chen
Signed-off-by: Felipe Balbi -
It is used to access un-regulator registers according to
different controllers.Signed-off-by: Peter Chen
Signed-off-by: Felipe Balbi -
Two PHY bugs are fixed by IC logic, but these bits are not
enabled by default, so we enable them at driver.
The two bugs are: MXS_PHY_ABNORMAL_IN_SUSPEND and MXS_PHY_SENDING_SOF_TOO_FAST
which are described at code.Signed-off-by: Peter Chen
Signed-off-by: Felipe Balbi -
Change "high speed" to "HS"
Change "non-high speed" to "FS/LS"Implementation of notify_suspend and notify_resume will be different
according to mxs_phy_data->flags.Signed-off-by: Peter Chen
Signed-off-by: Felipe Balbi -
It is needed by imx6 SoC series, but not for imx23 and imx28.
Signed-off-by: Peter Chen
Signed-off-by: Felipe Balbi -
The auto setting is used to open related power and clocks
automatically after receiving wakeup signal.With this feature, the PHY's clock and power can be recovered
correctly from low power mode, it is guaranteed by IC logic.Signed-off-by: Peter Chen
Signed-off-by: Felipe Balbi -
The mxs-phy has several bugs and features at different
versions, the driver code can get it through of_device_id.data.Signed-off-by: Peter Chen
Signed-off-by: Felipe Balbi
19 Dec, 2013
1 commit
-
Linux 3.13-rc4
* tag 'v3.13-rc4': (1001 commits)
Linux 3.13-rc4
null_blk: mem garbage on NUMA systems during init
radeon_pm: fix oops in hwmon_attributes_visible() and radeon_hwmon_show_temp_thresh()
Revert "selinux: consider filesystem subtype in policies"
igb: Fix for issue where values could be too high for udelay function.
i40e: fix null dereference
ARM: fix asm/memory.h build error
dm array: fix a reference counting bug in shadow_ablock
dm space map: disallow decrementing a reference count below zero
mm: memcg: do not allow task about to OOM kill to bypass the limit
mm: memcg: fix race condition between memcg teardown and swapin
thp: move preallocated PTE page table on move_huge_pmd()
mfd/rtc: s5m: fix register updating by adding regmap for RTC
rtc: s5m: enable IRQ wake during suspend
rtc: s5m: limit endless loop waiting for register update
rtc: s5m: fix unsuccesful IRQ request during probe
drivers/rtc/rtc-s5m.c: fix info->rtc assignment
include/linux/kernel.h: make might_fault() a nop for !MMU
drivers/rtc/rtc-at91rm9200.c: correct alarm over day/month wrap
procfs: also fix proc_reg_get_unmapped_area() for !MMU case
...Signed-off-by: Felipe Balbi
13 Dec, 2013
1 commit
-
We need to initialize the notifer before use it.
So lets initialize it when add a new phy device to
reduce the code redundancy.Signed-off-by: Neil Zhang
Signed-off-by: Felipe Balbi
07 Dec, 2013
1 commit
-
clk_prepare_enable() may fail, so let's check its return value and propagate it
in the case of error.Acked-by: Peter Chen
Signed-off-by: Fabio Estevam
Signed-off-by: Felipe Balbi
26 Nov, 2013
1 commit
-
We need to set mxs_phy rather as the platform drvdata so that we can get
the correct mxs_phy in mxs_phy_remove().Signed-off-by: Jisheng Zhang
Acked-by: Peter Chen
Signed-off-by: Felipe Balbi
29 Jul, 2013
1 commit
-
stmp_reset_block() may fail, so let's check its return value and propagate it
in the case of error.Acked-by: Shawn Guo
Signed-off-by: Fabio Estevam
Signed-off-by: Felipe Balbi
15 May, 2013
3 commits
-
The mxs-phy is missing the phy.type property, why the usb_get_phy helper
function won't be able to find it. This patch adds this missing property.Signed-off-by: Michael Grzeschik
Signed-off-by: Felipe Balbi -
devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.Acked-by: Greg Kroah-Hartman
Signed-off-by: Wolfram Sang
Signed-off-by: Felipe Balbi -
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no
driver is bound) removes the need to set driver data field to
NULL.Signed-off-by: Sachin Kamat
Cc: Marek Vasut
Signed-off-by: Felipe Balbi
18 Mar, 2013
1 commit
-
this will make sure that we have sensible names
for all phy drivers. Current situation was already
quite bad with too generic names being used.Signed-off-by: Felipe Balbi