23 May, 2011
1 commit
27 Apr, 2011
1 commit
-
Signed-off-by: Paul Mundt
18 Apr, 2011
1 commit
-
div6 clock should not use arch_flags for clk_rate_table_build,
because SH_CLK_DIV6_EXT doesn't care .arch_flags.
clk->freq_table[] will be all CPUFREQ_ENTRY_INVALID without this patch.Signed-off-by: Kuninori Morimoto
Cc: stable@kernel.org
Signed-off-by: Paul Mundt
30 Mar, 2011
1 commit
-
I missed that coccinelle does not fix up header files by default.
Reported-by: Rafael J. Wysocki
Signed-off-by: Thomas Gleixner
Cc: Paul Mundt
Cc:
29 Mar, 2011
2 commits
-
Scripted with coccinelle.
Signed-off-by: Thomas Gleixner
-
Signed-off-by: Thomas Gleixner
23 Mar, 2011
1 commit
-
Convert the SuperH clocks framework and shared interrupt handling
code to using struct syscore_ops instead of a sysdev classes and
sysdevs for power managment.This reduces the code size significantly and simplifies it. The
optimizations causing things not to be restored after creating a
hibernation image are removed, but they might lead to undesirable
effects during resume from hibernation (e.g. the clocks would be left
as the boot kernel set them, which might be not the same way as the
hibernated kernel had seen them before the hibernation).This also is necessary for removing sysdevs from the kernel entirely
in the future.Signed-off-by: Rafael J. Wysocki
Signed-off-by: Paul Mundt
19 Jan, 2011
1 commit
-
Clear the valid flag is in the INTC code.
Without this fix bit 7 of the sense register
is mistakenly set.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt
11 Jan, 2011
1 commit
-
Remove kobject.h from files which don't need it, notably,
sched.h and fs.h.Signed-off-by: Alexey Dobriyan
Signed-off-by: Linus Torvalds
24 Dec, 2010
1 commit
-
Presently the root node is initialized by way of kzalloc on the parent
data structure, which by chance happens to do the bulk of what an
explicit initialization does with GFP_NOWAIT semantics. This however is
more by luck than by design, and as we ideally want to permit radix node
allocations access to the emergency pools anyways, add in the proper
initializer with the desired mask.Signed-off-by: Paul Mundt
19 Nov, 2010
2 commits
-
The disabling of the init op for non-legacy clocks neglected to do the
same in the core clock framework, resulting in a build failure. Fix it
up.Reported-by: Guennadi Liakhovetski
Signed-off-by: Paul Mundt
16 Nov, 2010
1 commit
15 Nov, 2010
3 commits
-
Now that clk_set_rate_ex() is gone, there is also no way to get at rate
setting algo id, which is now also completely unused. Kill it off before
new clock ops start using it.Signed-off-by: Paul Mundt
-
With the refactoring of the SH7722 clock framework some time ago this
abstraction has become unecessary. Kill it off before anyone else gets
the bright idea to start using it.Signed-off-by: Paul Mundt
-
The radix tree retry logic got a bit of an overhaul and subsequently
broke the virtual IRQ subgroup build. Simply switch over to
radix_tree_deref_retry() as per the filemap changes, which the virq
lookup logic was modelled after in the first place.Signed-off-by: Paul Mundt
10 Nov, 2010
1 commit
-
CC drivers/sh/clk/core.o
drivers/sh/clk/core.c: In function 'clk_round_parent':
drivers/sh/clk/core.c:574: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'unsigned int'
drivers/sh/clk/core.c:594: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'unsigned int'Signed-off-by: Paul Mundt
08 Nov, 2010
3 commits
-
…xtension' into sh-fixes-for-linus
-
The clk_round_parent() change introduced various checkpatch warnings,
tidy them up.Signed-off-by: Paul Mundt
-
Sometimes it is possible and reasonable to adjust the parent clock rate to
improve precision of the child clock, e.g., if the child clock has no siblings.
clk_round_parent() is a new addition to the SH clock-framework API, that
implements such an optimization for child clocks with divisors, taking all
integer values in a range.Signed-off-by: Guennadi Liakhovetski
Signed-off-by: Paul Mundt
02 Nov, 2010
2 commits
-
Signed-off-by: Paul Mundt
-
According to the linux/clk.h definition we should be handing back an
errno value or a valid rate. This fixes up the case where 0 can be
returned for invalid frequencies or cases where rounding has no
selectable candidate.Reported-by: Guennadi Liakhovetski
Signed-off-by: Paul Mundt
28 Oct, 2010
1 commit
-
There's no need to iterative over every single irq_desc when we can
already work out which IRQs have a backing descriptor via the shiny new
for_each_active_irq(). Switch to that instead.Signed-off-by: Paul Mundt
27 Oct, 2010
2 commits
-
Signed-off-by: Paul Mundt
-
The ctrl_xxx routines are deprecated, switch over to the __raw_xxx
versions.Signed-off-by: Paul Mundt
26 Oct, 2010
2 commits
-
Now that the genirq code provides an IRQ bitmap of its own and the
necessary API to manipulate it, there's no need to keep our own version
around anymore.In the process we kill off some unused IRQ reservation code, with future
users now having to tie in to the genirq API as normal.Signed-off-by: Paul Mundt
-
Switch over to the new allocator functions.
Signed-off-by: Thomas Gleixner
Signed-off-by: Paul Mundt
18 Oct, 2010
2 commits
-
This shuffles the clock framework code around to a drivers/sh/clk subdir,
to follow the intc split up. This will make it easier to subsequently
break things out as well as plug in different helpers for non-CPG users.Signed-off-by: Paul Mundt
-
The end condition of for_each_frequency should care about
both clk_rate_table_round and clk_rate_div_range_round,
and using "correct max size" is a natural idea in later function.
To avoid data over flow, this patch didn't modify
clk_rate_div_range_round side as .max = div_max + 1.Signed-off-by: Kuninori Morimoto
Signed-off-by: Paul Mundt
15 Oct, 2010
4 commits
-
When updating the iterator macro an old argument assignment was used on
the initial assignment causing a fault on the table rounding. Fix it up.Signed-off-by: Paul Mundt
-
This adds a new clk_rate_div_range_round() for implementing rate rounding
by divisor ranges. This can be used trivially by clocks that support
arbitrary ranged divisors without the need for rate table construction.This should only be used by clocks that both have large divisor ranges in
addition to clocks that will never be arbitrarily scaled, as the lack of
a backing frequency table will prevent cpufreq from being able to do much
of anything with them.Primarily intended for use as a ->recalc helper.
Signed-off-by: Paul Mundt
-
Presently the only assisted rate rounding is frequency table backed, but
there are cases where it's impractical to use a frequency table for
certain clocks (such as the FSIDIV case, which supports 65535 divisors),
and we wish to reuse the same rate rounding algorithm.This breaks out the core of the rate rounding logic in to its own helper
routine and shuffles the frequency table logic around, switching to using
an iterator for the generic helper routine.Signed-off-by: Paul Mundt
-
This implements support for ioremapping of register windows that
encapsulate clock control registers used by a struct clk, with
transparent sibling inheritance.Root clocks at the top of a given topology often encapsulate the entire
register space of all of their sibling clocks, so this mapping can be
done once and handed down. A given clock enable/disable case maps out to
a single bit in a shared register, so this prevents creating multiple
overlapping mappings.The mapping case breaks down in to a couple of different situations:
- Sibling clocks without a specific mapping.
- Root clocks without a specific mapping.
- Any of sibling/root clocks with a specific mapping.Sibling clocks with no specified mapping will grovel up the clock chain
and install the root clock mapping unconditionally at registration time.Root clocks without their own mappings have a dummy BSS-initialized
mapping inserted that is handed down the chain just like any other
mapping. This permits all of the sibling clock ops to read/write using
the mapping offsets without any special configuration, enabling them to
not care whether access ultimately goes through translatable or
untranslatable memory.Any clock with its own mapping will have the window initialized at
registration time and be ready for use by its clock ops. Failure to
establish the mapping will prevent registration, so no additional sanity
checks are needed. Sibling clocks that double as parents for the moment
will not propagate their mapping down, but this is easily tunable if the
need arises.All clock mappings are kref refcounted, with each instance of mapping
inheritance incrementing the refcount.Tested-by: Kuninori Morimoto
Signed-off-by: Paul Mundt
13 Oct, 2010
2 commits
-
Signed-off-by: Paul Mundt
-
Remove "name" and "id" from drivers/sh/ struct clk.
The struct clk members "name" and "id" are not used
now when matching is done through clkdev.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt
06 Oct, 2010
2 commits
-
The balancing stubs obviously need to be static inline..
Signed-off-by: Paul Mundt
-
The Kconfig and Makefile were overlooked, add those in now to improve
odds of building.Signed-off-by: Paul Mundt
05 Oct, 2010
3 commits
-
This splits up the sh intc core in to something more vaguely resembling
a subsystem. Most of the functionality was alread fairly well
compartmentalized, and there were only a handful of interdependencies
that needed to be resolved in the process.This also serves as future-proofing for the genirq and sparseirq rework,
which will make some of the split out functionality wholly generic,
allowing things to be killed off in place with minimal migration pain.Signed-off-by: Paul Mundt
-
If lookups happen while the radix node still points to a subgroup
mapping, an IRQ hasn't yet been made available for the specified id, so
error out accordingly. Once the slot is replaced with an IRQ mapping and
the tag is discarded, lookup can commence as normal.Signed-off-by: Paul Mundt
-
Many interrupts that share a single mask source but are on different
hardware vectors will have an associated register tied to an INTEVT that
denotes the precise cause for the interrupt exception being triggered.This introduces the concept of IRQ subgroups in the intc core, where
a virtual IRQ map is constructed for each of the pre-defined cause bits,
and a higher level chained handler takes control of the parent INTEVT.
This enables CPUs with heavily muxed IRQ vectors (especially across
disjoint blocks) to break things out in to a series of managed chained
handlers while being able to dynamically lookup and adopt the IRQs
created for them.This is largely an opt-in interface, requiring CPUs to manually submit
IRQs for subgroup splitting, in addition to providing identifiers in
their enum maps that can be used for lazy lookup via the radix tree.Signed-off-by: Paul Mundt