01 Jul, 2011
2 commits
-
Add a NODE level to the generic cache events which is used to measure
local vs remote memory accesses. Like all other cache events, an
ACCESS is HIT+MISS, if there is no way to distinguish between reads
and writes do reads only etc..The below needs filling out for !x86 (which I filled out with
unsupported events).I'm fairly sure ARM can leave it like that since it doesn't strike me as
an architecture that even has NUMA support. SH might have something since
it does appear to have some NUMA bits.Sparc64, PowerPC and MIPS certainly want a good look there since they
clearly are NUMA capable.Signed-off-by: Peter Zijlstra
Cc: David Miller
Cc: Anton Blanchard
Cc: David Daney
Cc: Deng-Cheng Zhu
Cc: Paul Mundt
Cc: Will Deacon
Cc: Robert Richter
Cc: Stephane Eranian
Link: http://lkml.kernel.org/r/1303508226.4865.8.camel@laptop
Signed-off-by: Ingo Molnar -
The nmi parameter indicated if we could do wakeups from the current
context, if not, we would set some state and self-IPI and let the
resulting interrupt do the wakeup.For the various event classes:
- hardware: nmi=0; PMI is in fact an NMI or we run irq_work_run from
the PMI-tail (ARM etc.)
- tracepoint: nmi=0; since tracepoint could be from NMI context.
- software: nmi=[0,1]; some, like the schedule thing cannot
perform wakeups, and hence need 0.As one can see, there is very little nmi=1 usage, and the down-side of
not using it is that on some platforms some software events can have a
jiffy delay in wakeup (when arch_irq_work_raise isn't implemented).The up-side however is that we can remove the nmi parameter and save a
bunch of conditionals in fast paths.Signed-off-by: Peter Zijlstra
Cc: Michael Cree
Cc: Will Deacon
Cc: Deng-Cheng Zhu
Cc: Anton Blanchard
Cc: Eric B Munson
Cc: Heiko Carstens
Cc: Paul Mundt
Cc: David S. Miller
Cc: Frederic Weisbecker
Cc: Jason Wessel
Cc: Don Zickus
Link: http://lkml.kernel.org/n/tip-agjev8eu666tvknpb3iaj0fg@git.kernel.org
Signed-off-by: Ingo Molnar
28 Jun, 2011
1 commit
-
commit 21a3c96 uses node_start/end_pfn(nid) for detection start/end
of nodes. But, it's not defined in linux/mmzone.h but defined in
/arch/???/include/mmzone.h which is included only under
CONFIG_NEED_MULTIPLE_NODES=y.Then, we see
mm/page_cgroup.c: In function 'page_cgroup_init':
mm/page_cgroup.c:308: error: implicit declaration of function 'node_start_pfn'
mm/page_cgroup.c:309: error: implicit declaration of function 'node_end_pfn'So, fixiing page_cgroup.c is an idea...
But node_start_pfn()/node_end_pfn() is a very generic macro and
should be implemented in the same manner for all archs.
(m32r has different implementation...)This patch removes definitions of node_start/end_pfn() in each archs
and defines a unified one in linux/mmzone.h. It's not under
CONFIG_NEED_MULTIPLE_NODES, now.A result of macro expansion is here (mm/page_cgroup.c)
for !NUMA
start_pfn = ((&contig_page_data)->node_start_pfn);
end_pfn = ({ pg_data_t *__pgdat = (&contig_page_data); __pgdat->node_start_pfn + __pgdat->node_spanned_pages;});for NUMA (x86-64)
start_pfn = ((node_data[nid])->node_start_pfn);
end_pfn = ({ pg_data_t *__pgdat = (node_data[nid]); __pgdat->node_start_pfn + __pgdat->node_spanned_pages;});Changelog:
- fixed to avoid using "nid" twice in node_end_pfn() macro.Reported-and-acked-by: Randy Dunlap
Reported-and-tested-by: Ingo Molnar
Acked-by: Mel Gorman
Signed-off-by: KAMEZAWA Hiroyuki
Signed-off-by: Linus Torvalds
10 Jun, 2011
2 commits
-
During converting per-cpu ticker to genirq layer some
IRQ initialization code was removed by commit
2cf9530420e446bb61f665d02afeb81070106900 ("sparc32,leon:
per-cpu ticker use genirq per-cpu handler").This patch reintroduces the code at the same place it was
removed from. IRQ12 - IRQ14 will crash on LEON SMP without
this patch because it will run the SUN4M IRQ trap handler.Reported-by: Jan Andersson
Signed-off-by: Daniel Hellstrom
Signed-off-by: David S. Miller -
Three new IPIs were introduced by commit
ecbc42b70acbc6327adefe9635db93fcf62bf59d ("sparc32, sun4m:
Implemented SMP IPIs support for SUN4M machines"), the
old handler was already prepared for IPIs but handled only
IRQ14 and IRQ13, this patch adds support for the new IPI at
IRQ12.The IPI trap handler looks at the mask rather than the
pending IRQ/IPI, this bug may have masked the problem
above, introduced by the same commit.Signed-off-by: Daniel Hellstrom
Signed-off-by: David S. Miller
08 Jun, 2011
4 commits
-
Semicolons are not necessary after switch/while/for/if braces
so remove them.Signed-off-by: Joe Perches
Signed-off-by: David S. Miller -
Some devices that can generate interrupts are connected directly to the
CPU through the bootbus on sun4d. This patch allows IRQs to be allocated
for such devices. The information used for allocating interrupts for
sbus devices are present at the corresponding SBI node. For bootbus
devices this information is present in the bootbus node.Signed-off-by: Kjetil Oftedal
Signed-off-by: David S. Miller -
During the introduction of genirq on sparc32 bugs were introduced in
the interrupt handler for sun4d. The interrupts handler checks the status
of the various sbus interfaces in the system and generates a virtual
interrupt, based upon the location of the interrupt source. This lookup
was broken by restructuring the code in such a way that index and shift
operations were performed prior to comparing this against the values
read from the interrupt controllers.This could cause the handler to loop eternally as the interrupt source
could be skipped before any check was performed. Additionally
sun4d_encode_irq performs shifting internally, so it should not be performed
twice.In sun4d_unmask interrupts were not correctly acknowledged, as the
corresponding bit it the interrupt mask was not actually cleared.Signed-off-by: Kjetil Oftedal
Signed-off-by: David S. Miller -
sun4d_build_device_irq was called without a valid platform_device when
the system timer was initialized on sun4d systems. This caused a NULL
pointer crash.Josip Rodin suggested that the current sun4d_build_device_irq should be
split into two functions. So that the timer initialization could skip
the slot and sbus interface detection code in sun4d_build_device_irq, as
this does not make sence due to the timer interrupts not being generated
from a device located on sbus.Signed-off-by: Kjetil Oftedal
Signed-off-by: David S. Miller
03 Jun, 2011
5 commits
-
Reported-by: Stephen Rothwell
Signed-off-by: David S. Miller -
Config option GENERIC_HARDIRQS_NO_DEPRECATED was removed in commit
78c89825649a9a5ed526c507603196f467d781a5 ("genirq: Remove the now obsolete
config options and select statements"), but the select was accidentally
reintroduced in commit 6baa9b20a68a88c2fd751cbe8d7652009379351b
("sparc32: genirq support")Signed-off-by: Geert Uytterhoeven
Signed-off-by: David S. Miller -
The DMA region must be accessible in order for PCI peripheral
drivers to work, the sparc32 has DMA in the normal memory
zone which requires the GRPCI2 to PCI target BARs so that all
kernel low mem (192MB) can be mapped 1:1 to PCI address
space. The GRPCI2 has resizeable target BARs, by default the
first is made 256MB and all other BARs are disabled.I/O space are always located on 0x1000-0x10000, but accessed
through the GRPCI2 PCI I/O Window memory mapped to virtual
address space.Configuration space is accessed through the 64KB GRPCI2 PCI
CFG Window using LDA bypassing the MMU.The GRPCI2 has a single PCI Window for prefetchable and non-
prefetchable address space, it is up to the AHB master
requesting PCI data to determine access type. Memory space
is mapped 1:1.The GRPCI2 core can be configured in 4 different IRQ modes,
where PCI Interrupt, Error Interrupt and DMA Interrupt are
shared on a single IRQ line or at most 5 IRQs are used. The
GRPCI2 can mask/unmask PCI interrupts, Err and DMA in the control
and check status bits which tells us which IRQ really happended.
The GENIRQ layer is used to unmask/mask each individual IRQ
source by creating virtual IRQs and implementing a IRQ chip.The optional DMA functionality of the GRPCI2 is not supported
by this patch.Signed-off-by: Daniel Hellstrom
Signed-off-by: David S. Miller -
The LEON architecture does not have a BIOS or bootloader that
initializes PCI for us, instead Linux generic PCI layer is used
to set up resources and IRQ.Signed-off-by: Daniel Hellstrom
Signed-off-by: David S. Miller -
Signed-off-by: Daniel Hellstrom
Signed-off-by: David S. Miller
29 May, 2011
2 commits
-
* setns:
ns: Wire up the setns system callDone as a merge to make it easier to fix up conflicts in arm due to
addition of sendmmsg system call -
32bit and 64bit on x86 are tested and working. The rest I have looked
at closely and I can't find any problems.setns is an easy system call to wire up. It just takes two ints so I
don't expect any weird architecture porting problems.While doing this I have noticed that we have some architectures that are
very slow to get new system calls. cris seems to be the slowest where
the last system calls wired up were preadv and pwritev. avr32 is weird
in that recvmmsg was wired up but never declared in unistd.h. frv is
behind with perf_event_open being the last syscall wired up. On h8300
the last system call wired up was epoll_wait. On m32r the last system
call wired up was fallocate. mn10300 has recvmmsg as the last system
call wired up. The rest seem to at least have syncfs wired up which was
new in the 2.6.39.v2: Most of the architecture support added by Daniel Lezcano
v3: ported to v2.6.36-rc4 by: Eric W. Biederman
v4: Moved wiring up of the system call to another patch
v5: ported to v2.6.39-rc6
v6: rebased onto parisc-next and net-next to avoid syscall conflicts.
v7: ported to Linus's latest post 2.6.39 tree.> arch/blackfin/include/asm/unistd.h | 3 ++-
> arch/blackfin/mach-common/entry.S | 1 +
Acked-by: Mike FrysingerOh - ia64 wiring looks good.
Acked-by: Tony LuckSigned-off-by: Eric W. Biederman
Signed-off-by: Linus Torvalds
27 May, 2011
1 commit
-
By the previous style change, CONFIG_GENERIC_FIND_NEXT_BIT,
CONFIG_GENERIC_FIND_BIT_LE, and CONFIG_GENERIC_FIND_LAST_BIT are not used
to test for existence of find bitops anymore.Signed-off-by: Akinobu Mita
Acked-by: Greg Ungerer
Cc: Arnd Bergmann
Cc: Russell King
Cc: Martin Schwidefsky
Cc: Heiko Carstens
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
25 May, 2011
5 commits
-
Most arches define CONFIG_DEBUG_STACK_USAGE exactly the same way. Move it
to lib/Kconfig.debug so each arch doesn't have to define it. This
obviously makes the option generic, but that's fine because the config is
already used in generic code.It's not obvious to me that sysrq-P actually does anything caution by
keeping the most inclusive wording.Signed-off-by: Stephen Boyd
Cc: Chris Metcalf
Acked-by: David S. Miller
Acked-by: Richard Weinberger
Acked-by: Mike Frysinger
Cc: Russell King
Cc: Hirokazu Takata
Acked-by: Ralf Baechle
Cc: Paul Mackerras
Acked-by: Benjamin Herrenschmidt
Cc: Chen Liqin
Cc: Lennox Wu
Cc: Ingo Molnar
Cc: Thomas Gleixner
Cc: "H. Peter Anvin"
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Fold all the mmu_gather rework patches into one for submission
Signed-off-by: Peter Zijlstra
Reported-by: Hugh Dickins
Cc: Benjamin Herrenschmidt
Cc: David Miller
Cc: Martin Schwidefsky
Cc: Russell King
Cc: Paul Mundt
Cc: Jeff Dike
Cc: Richard Weinberger
Cc: Tony Luck
Cc: KAMEZAWA Hiroyuki
Cc: Mel Gorman
Cc: KOSAKI Motohiro
Cc: Nick Piggin
Cc: Namhyung Kim
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Rework the sparc mmu_gather usage to conform to the new world order :-)
Sparc mmu_gather does two things:
- tracks vaddrs to unhash
- tracks pages to freeSplit these two things like powerpc has done and keep the vaddrs
in per-cpu data structures and flush them on context switch.The remaining bits can then use the generic mmu_gather.
Signed-off-by: Peter Zijlstra
Acked-by: David Miller
Cc: Benjamin Herrenschmidt
Cc: Martin Schwidefsky
Cc: Russell King
Cc: Paul Mundt
Cc: Jeff Dike
Cc: Richard Weinberger
Cc: Tony Luck
Cc: KAMEZAWA Hiroyuki
Cc: Hugh Dickins
Cc: Mel Gorman
Cc: KOSAKI Motohiro
Cc: Nick Piggin
Cc: Namhyung Kim
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Architectures that implement their own show_mem() function did not pass
the filter argument to show_free_areas() to appropriately avoid emitting
the state of nodes that are disallowed in the current context. This patch
now passes the filter argument to show_free_areas() so those nodes are now
avoided.This patch also removes the show_free_areas() wrapper around
__show_free_areas() and converts existing callers to pass an empty filter.ia64 emits additional information for each node, so skip_free_areas_zone()
must be made global to filter disallowed nodes and it is converted to use
a nid argument rather than a zone for this use case.Signed-off-by: David Rientjes
Cc: Russell King
Cc: Tony Luck
Cc: Fenghua Yu
Cc: Kyle McMartin
Cc: Helge Deller
Cc: James Bottomley
Cc: "David S. Miller"
Cc: Guan Xuetao
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
* 'for-2.6.40' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu: Unify input section names
percpu: Avoid extra NOP in percpu_cmpxchg16b_double
percpu: Cast away printk format warning
percpu: Always align percpu output section to PAGE_SIZEFix up fairly trivial conflict in arch/x86/include/asm/percpu.h as per Tejun
24 May, 2011
1 commit
23 May, 2011
2 commits
-
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6: (28 commits)
sparc32: fix build, fix missing cpu_relax declaration
SCHED_TTWU_QUEUE is not longer needed since sparc32 now implements IPI
sparc32,leon: Remove unnecessary page_address calls in LEON DMA API.
sparc: convert old cpumask API into new one
sparc32, sun4d: Implemented SMP IPIs support for SUN4D machines
sparc32, sun4m: Implemented SMP IPIs support for SUN4M machines
sparc32,leon: Implemented SMP IPIs for LEON CPU
sparc32: implement SMP IPIs using the generic functions
sparc32,leon: SMP power down implementation
sparc32,leon: added some SMP comments
sparc: add {read,write}*_be routines
sparc32,leon: don't rely on bootloader to mask IRQs
sparc32,leon: operate on boot-cpu IRQ controller registers
sparc32: always define boot_cpu_id
sparc32: removed unused code, implemented by generic code
sparc32: avoid build warning at mm/percpu.c:1647
sparc32: always register a PROM based early console
sparc32: probe for cpu info only during startup
sparc: consolidate show_cpuinfo in cpu.c
sparc32,leon: implement genirq CPU affinity
... -
Fix following sparc (32 bit) build error:
CC arch/sparc/kernel/asm-offsets.s
In file included from include/linux/seqlock.h:29:0,
from include/linux/time.h:8,
from include/linux/timex.h:56,
from include/linux/sched.h:57,
from arch/sparc/kernel/asm-offsets.c:13:
include/linux/spinlock.h: In function 'spin_unlock_wait':
include/linux/spinlock.h:360:2: error: implicit declaration of function 'cpu_relax'Most likely caused by commit e66eed651fd1 ("list: remove
prefetching from regular list iterators") due to include
changes.Signed-off-by: Sam Ravnborg
Cc: Stephen Rothwell
Signed-off-by: David S. Miller
21 May, 2011
3 commits
-
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1446 commits)
macvlan: fix panic if lowerdev in a bond
tg3: Add braces around 5906 workaround.
tg3: Fix NETIF_F_LOOPBACK error
macvlan: remove one synchronize_rcu() call
networking: NET_CLS_ROUTE4 depends on INET
irda: Fix error propagation in ircomm_lmp_connect_response()
irda: Kill set but unused variable 'bytes' in irlan_check_command_param()
irda: Kill set but unused variable 'clen' in ircomm_connect_indication()
rxrpc: Fix set but unused variable 'usage' in rxrpc_get_transport()
be2net: Kill set but unused variable 'req' in lancer_fw_download()
irda: Kill set but unused vars 'saddr' and 'daddr' in irlan_provider_connect_indication()
atl1c: atl1c_resume() is only used when CONFIG_PM_SLEEP is defined.
rxrpc: Fix set but unused variable 'usage' in rxrpc_get_peer().
rxrpc: Kill set but unused variable 'local' in rxrpc_UDP_error_handler()
rxrpc: Kill set but unused variable 'sp' in rxrpc_process_connection()
rxrpc: Kill set but unused variable 'sp' in rxrpc_rotate_tx_window()
pkt_sched: Kill set but unused variable 'protocol' in tc_classify()
isdn: capi: Use pr_debug() instead of ifdefs.
tg3: Update version to 3.119
tg3: Apply rx_discards fix to 5719/5720
...Fix up trivial conflicts in arch/x86/Kconfig and net/mac80211/agg-tx.c
as per Davem. -
Conflicts:
arch/sparc/kernel/smp_32.cWith merge conflict help from Daniel Hellstrom.
Signed-off-by: David S. Miller
20 May, 2011
2 commits
-
…kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (60 commits)
sched: Fix and optimise calculation of the weight-inverse
sched: Avoid going ahead if ->cpus_allowed is not changed
sched, rt: Update rq clock when unthrottling of an otherwise idle CPU
sched: Remove unused parameters from sched_fork() and wake_up_new_task()
sched: Shorten the construction of the span cpu mask of sched domain
sched: Wrap the 'cfs_rq->nr_spread_over' field with CONFIG_SCHED_DEBUG
sched: Remove unused 'this_best_prio arg' from balance_tasks()
sched: Remove noop in alloc_rt_sched_group()
sched: Get rid of lock_depth
sched: Remove obsolete comment from scheduler_tick()
sched: Fix sched_domain iterations vs. RCU
sched: Next buddy hint on sleep and preempt path
sched: Make set_*_buddy() work on non-task entities
sched: Remove need_migrate_task()
sched: Move the second half of ttwu() to the remote cpu
sched: Restructure ttwu() some more
sched: Rename ttwu_post_activation() to ttwu_do_wakeup()
sched: Remove rq argument from ttwu_stat()
sched: Remove rq->lock from the first half of ttwu()
sched: Drop rq->lock from sched_exec()
...* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: Fix rt_rq runtime leakage bug -
…git/tip/linux-2.6-tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (107 commits)
perf stat: Add more cache-miss percentage printouts
perf stat: Add -d -d and -d -d -d options to show more CPU events
ftrace/kbuild: Add recordmcount files to force full build
ftrace: Add self-tests for multiple function trace users
ftrace: Modify ftrace_set_filter/notrace to take ops
ftrace: Allow dynamically allocated function tracers
ftrace: Implement separate user function filtering
ftrace: Free hash with call_rcu_sched()
ftrace: Have global_ops store the functions that are to be traced
ftrace: Add ops parameter to ftrace_startup/shutdown functions
ftrace: Add enabled_functions file
ftrace: Use counters to enable functions to trace
ftrace: Separate hash allocation and assignment
ftrace: Create a global_ops to hold the filter and notrace hashes
ftrace: Use hash instead for FTRACE_FL_FILTER
ftrace: Replace FTRACE_FL_NOTRACE flag with a hash of ignored functions
perf bench, x86: Add alternatives-asm.h wrapper
x86, 64-bit: Fix copy_[to/from]_user() checks for the userspace address limit
x86, mem: memset_64.S: Optimize memset by enhanced REP MOVSB/STOSB
x86, mem: memmove_64.S: Optimize memmove by enhanced REP MOVSB/STOSB
...
19 May, 2011
1 commit
-
Commit b826291c, "drivercore/dt: add a match table pointer to struct
device" added an of_match pointer to struct device to cache the
of_match_table entry discovered at driver match time. This was unsafe
because matching is not an atomic operation with probing a driver. If
two or more drivers are attempted to be matched to a driver at the
same time, then the cached matching entry pointer could get
overwritten.This patch reverts the of_match cache pointer and reworks all users to
call of_match_device() directly instead.Signed-off-by: Grant Likely
17 May, 2011
8 commits
-
The function mmu_inval_dma_area takes a virtual address as a parameter
which is problematic in case the buffer is located in highmem and the
mapping currently is unavailable.Since the function was only implemented for LEON this patch removes
calls to it in non LEON code paths and renames it to dma_make_coherent
which instead takes a physical address (which for now is unused since we
flush the whole cache). This way it is possible to remove several unnecessary
calls to page_address which will fail if the virtual mapping is unavailable.Signed-off-by: Kristoffer Glembo
Acked-by: Sam Ravnborg
Signed-off-by: David S. Miller -
Adapt new API. Almost change is trivial, most important change are to
remove following like =operator.cpumask_t cpu_mask = *mm_cpumask(mm);
cpus_allowed = current->cpus_allowed;Because cpumask_var_t is =operator unsafe. These usage might prevent
kernel core improvement.No functional change.
Signed-off-by: KOSAKI Motohiro
Signed-off-by: David S. Miller -
The sun4d does not seem to have a distingstion between soft and hard
IRQs. When generating IPIs the generated IRQ looks like a hard IRQ,
this patch adds a "IPI check" in the sun4d irq trap handler at a
predefined IRQ number (SUN4D_IPI_IRQ). Before generating an IPI
a per-cpu memory structure is modified for the "IPI check" to
successfully detect a IPI request to a specific processor, the check
clears the IPI work requested.All three IPIs (resched, single and cpu-mask) use the same IRQ
number.The IPI IRQ should preferrably be on a separate IRQ and definitly
not shared with IRQ handlers requesting IRQ with IRQF_SHARED.Signed-off-by: Daniel Hellstrom
Signed-off-by: David S. Miller -
Implement the three IPIs (resched, single and cpu-mask) generation
and interrupt handler catch. The sun4m has 15 soft-IRQs and three
of them is used with this patch, the three IPIs was previously
implemented with the cross-call IRQ15 which does not work with
locking routines such as spinlocks because IRQ15 is NMI, it may
cause deadlock.The IRQ trap handler code assumes (in the same spritit as the old
it seems) that hard interrupts will be generated until handled
(level), when a IRQ happens the IRQ pending register is checked
for pending soft-IRQs. When both hard and soft IRQ happens at the
same time only soft-IRQs are handled.The old code implemented a soft-IRQ traphandler at IRQ14 which
called smp_reschedule_irq which in turn called set_need_resched.
It seems to be an old relic and is replaced with the interrupt
traphander exit code RESTORE_ALL, it calls schedule() when
appropriate.Signed-off-by: Daniel Hellstrom
Signed-off-by: David S. Miller -
This patch implements SMP IPIs on LEON using software generated
IRQs to signal between CPUs.The IPI IRQ number is set by using the ipi_num property in the
device tree, or defaults to 13. LEON SMP systems should reserve
IRQ 13 (and IRQ 15) to Linux in order for the defaults to work.Signed-off-by: Daniel Hellstrom
Signed-off-by: David S. Miller -
The current sparc32 SMP IPI generation is implemented the
cross call function. The cross call function uses IRQ15 the
NMI, this is has the effect that IPIs will interrupt IRQ
critical areas and hang the system. Typically on/after
spin_lock_irqsave calls can be aborted.The cross call functionality must still exist to flush
cache/TLBS.This patch provides CPU models a custom way to implement
generation of IPIs on the generic code's request. The
typical approach is to generate an IRQ for each IPI case.After this patch each sparc32 SMP CPU model needs to
implement IPIs in order to function properly.Signed-off-by: Daniel Hellstrom
Signed-off-by: David S. Miller -
Signed-off-by: Daniel Hellstrom
Signed-off-by: David S. Miller -
Signed-off-by: Daniel Hellstrom
Signed-off-by: David S. Miller
13 May, 2011
1 commit
-
This patch adds {read,write}*_be big endian memory access
routines to the io.h header used on SPARC32 and SPARC64.Tested on SPARC32 (LEON)
Signed-off-by: Jan Andersson
Signed-off-by: David S. Miller
