25 May, 2011
6 commits
-
The older add_mtd_device()/add_mtd_partitions() and their removal
counterparts will soon be gone. Replace uses with mtd_device_register()
and mtd_device_unregister().Signed-off-by: Jamie Iles
Signed-off-by: Artem Bityutskiy
Signed-off-by: David Woodhouse -
Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS
preprocessor conditionals as partitioning is always available.Cc: Kyungmin Park
Signed-off-by: Jamie Iles
Signed-off-by: Artem Bityutskiy
Signed-off-by: David Woodhouse -
Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS
preprocessor conditionals as partitioning is always available.Cc: Kyungmin Park
Signed-off-by: Jamie Iles
Signed-off-by: Artem Bityutskiy
Signed-off-by: David Woodhouse -
Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS
preprocessor conditionals as partitioning is always available.Cc: Kyungmin Park
Signed-off-by: Jamie Iles
Signed-off-by: Artem Bityutskiy
Signed-off-by: David Woodhouse -
Coverity has reported that inside the function "onenand_block_by_block_erase()"
in onenand_base.c, we should add a check to prevent the incrementing of
possible NULL value for "region"Signed-off-by: Maxin B. John
Signed-off-by: Artem Bityutskiy
Signed-off-by: David Woodhouse -
So as the ecclayout and suppage size for 4KiB page
Flex- and none-Flex OneNAND are different
the new values for none-Flex 4KiB page OneNAND memory are added.The introduced ecclayout and suppage size are based on specification
4Gib M-die OneNAND Flash (KFM4G16Q4M, KFN8G16Q4M). Rev. 1.3, Apr. 2010
For eccpos we expose only 64 bytes out of 72, for oobfree the spare area
fields marked as "Managed by internal ECC logic for Logical Sector Number area"
are used.Signed-off-by: Roman Tereshonkov
Signed-off-by: Artem Bityutskiy
Signed-off-by: David Woodhouse
31 Mar, 2011
1 commit
-
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi
25 Mar, 2011
1 commit
-
…linux-2.6 into for-linus-1
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6: (9356 commits)
[media] rc: update for bitop name changes
fs: simplify iget & friends
fs: pull inode->i_lock up out of writeback_single_inode
fs: rename inode_lock to inode_hash_lock
fs: move i_wb_list out from under inode_lock
fs: move i_sb_list out from under inode_lock
fs: remove inode_lock from iput_final and prune_icache
fs: Lock the inode LRU list separately
fs: factor inode disposal
fs: protect inode->i_state with inode->i_lock
lib, arch: add filter argument to show_mem and fix private implementations
SLUB: Write to per cpu data when allocating it
slub: Fix debugobjects with lockless fastpath
autofs4: Do not potentially dereference NULL pointer returned by fget() in autofs_dev_ioctl_setpipefd()
autofs4 - remove autofs4_lock
autofs4 - fix d_manage() return on rcu-walk
autofs4 - fix autofs4_expire_indirect() traversal
autofs4 - fix dentry leak in autofs4_expire_direct()
autofs4 - reinstate last used update on access
vfs - check non-mountpoint dentry might block in __follow_mount_rcu()
...NOTE!
This merge commit was created to fix compilation error. The block
tree was merged upstream and removed the 'elv_queue_empty()'
function which the new 'mtdswap' driver is using. So a simple
merge of the mtd tree with upstream does not compile. And the
mtd tree has already be published, so re-basing it is not an option.To fix this unfortunate situation, I had to merge upstream into the
mtd-2.6.git tree without committing, put the fixup patch on top of
this, and then commit this. The result is that we do not have commits
which do not compile.In other words, this merge commit "merges" 3 things: the MTD tree, the
upstream tree, and the fixup patch.
18 Mar, 2011
2 commits
-
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits)
omap: zoom: host should not pull up wl1271's irq line
arm: plat-omap: iommu: fix request_mem_region() error path
OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430
omap4: mux: Remove duplicate mux modes
omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag
omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set
omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected
omap4: board-omap4panda: Initialise the serial pads
omap3: board-3430sdp: Initialise the serial pads
omap4: board-4430sdp: Initialise the serial pads
omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init
omap2+: mux: Remove the use of IDLE flag
omap2+: Add separate list for dynamic pads to mux
perf: add OMAP support for the new power events
OMAP4: Add IVA OPP enteries.
OMAP4: Update Voltage Rail Values for MPU, IVA and CORE
OMAP4: Enable 800 MHz and 1 GHz MPU-OPP
OMAP3+: OPP: Replace voltage values with Macros
OMAP3: wdtimer: Fix CORE idle transition
Watchdog: omap_wdt: add fine grain runtime-pm
...Fix up various conflicts in
- arch/arm/mach-omap2/board-omap3evm.c
- arch/arm/mach-omap2/clock3xxx_data.c
- arch/arm/mach-omap2/usb-musb.c
- arch/arm/plat-omap/include/plat/usb.h
- drivers/usb/musb/musb_core.h -
* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (289 commits)
davinci: DM644x EVM: register MUSB device earlier
davinci: add spi devices on tnetv107x evm
davinci: add ssp config for tnetv107x evm board
davinci: add tnetv107x ssp platform device
spi: add ti-ssp spi master driver
mfd: add driver for sequencer serial port
ARM: EXYNOS4: Implement Clock gating for System MMU
ARM: EXYNOS4: Enhancement of System MMU driver
ARM: EXYNOS4: Add support for gpio interrupts
ARM: S5P: Add function to register gpio interrupt bank data
ARM: S5P: Cleanup S5P gpio interrupt code
ARM: EXYNOS4: Add missing GPYx banks
ARM: S3C64XX: Fix section mismatch from cpufreq init
ARM: EXYNOS4: Add keypad device to the SMDKV310
ARM: EXYNOS4: Update clocks for keypad
ARM: EXYNOS4: Update keypad base address
ARM: EXYNOS4: Add keypad device helpers
ARM: EXYNOS4: Add support for SATA on ARMLEX4210
plat-nomadik: make GPIO interrupts work with cpuidle ApSleep
mach-u300: define a dummy filter function for coh901318
...Fix up various conflicts in
- arch/arm/mach-exynos4/cpufreq.c
- arch/arm/mach-mxs/gpio.c
- drivers/net/Kconfig
- drivers/tty/serial/Kconfig
- drivers/tty/serial/Makefile
- drivers/usb/gadget/fsl_mxc_udc.c
- drivers/video/Kconfig
11 Mar, 2011
5 commits
-
New variable skip_initial_unlocking is added to the omap_onenand_platform_data.
This is used to inform the onenand driver to skip onenand unlocking when it
is initialized.Signed-off-by: Roman Tereshonkov
Signed-off-by: Artem Bityutskiy
Signed-off-by: David Woodhouse -
A new option ONENAND_SKIP_INITIAL_UNLOCKING is added. This allows
to disable initial onenand unlocking when the driver is initialized.Signed-off-by: Roman Tereshonkov
Signed-off-by: Artem Bityutskiy
Signed-off-by: David Woodhouse -
In onenand_verify function the address can be writepage non-aligned.
When a page is read for comparing the right offset should be used
for "this->verify_buf" to get the right matching with compared
"buf" buffer.Signed-off-by: Roman Tereshonkov
Signed-off-by: Adrian Hunter
Acked-by: Kyungmin Park
Signed-off-by: Artem Bityutskiy
Signed-off-by: David Woodhouse -
When reading using the 4KiB page read function, I/O
errors could be ignored if more than 1 page was read
at a time.Signed-off-by: Adrian Hunter
Acked-by: Kyungmin Park
Signed-off-by: Artem Bityutskiy
Signed-off-by: David Woodhouse -
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf (platform: prefix MODALIAS
with "platform:"), the platform modalias is prefixed with "platform:".Signed-off-by: Axel Lin
Signed-off-by: Artem Bityutskiy
Signed-off-by: David Woodhouse
Cc: stable@kernel.org
22 Feb, 2011
1 commit
-
This patch updates EXYNOS4 OneNAND support according to the change of
ARCH name, EXYNOS4.Cc: Kyungmin Park
Signed-off-by: Kukjin Kim
18 Feb, 2011
2 commits
-
The current multiblock erase verify read timeout 100us is the maximum
for none-error case. If errors happen during multibock erase then
the specification recommends to run multiblock erase verify command
with maximum timeout 10ms (see specs. for KFM4G16Q2A and KFN8G16Q2A).For the most common non-error case we wait 100us in udelay polling
loop. In case of timeout the interrupt mode is used to wait for the
command end.Signed-off-by: Roman Tereshonkov
Acked-by: Artem Bityutskiy
Signed-off-by: Tony Lindgren -
OneNAND frequency is determined when calculating
GPMC timings. Return that value instead of determining it
again in the OMAP OneNAND driver.Signed-off-by: Adrian Hunter
Signed-off-by: Tony Lindgren
18 Jan, 2011
1 commit
-
* git://git.infradead.org/mtd-2.6: (59 commits)
mtd: mtdpart: disallow reading OOB past the end of the partition
mtd: pxa3xx_nand: NULL dereference in pxa3xx_nand_probe
UBI: use mtd->writebufsize to set minimal I/O unit size
mtd: initialize writebufsize in the MTD object of a partition
mtd: onenand: add mtd->writebufsize initialization
mtd: nand: add mtd->writebufsize initialization
mtd: cfi: add writebufsize initialization
mtd: add writebufsize field to mtd_info struct
mtd: OneNAND: OMAP2/3: prevent regulator sleeping while OneNAND is in use
mtd: OneNAND: add enable / disable methods to onenand_chip
mtd: m25p80: Fix JEDEC ID for AT26DF321
mtd: txx9ndfmc: limit transfer bytes to 512 (ECC provides 6 bytes max)
mtd: cfi_cmdset_0002: add support for Samsung K8D3x16UxC NOR chips
mtd: cfi_cmdset_0002: add support for Samsung K8D6x16UxM NOR chips
mtd: nand: ams-delta: drop omap_read/write, use ioremap
mtd: m25p80: add debugging trace in sst_write
mtd: nand: ams-delta: select for built-in by default
mtd: OneNAND: lighten scary initial bad block messages
mtd: OneNAND: OMAP2/3: add support for command line partitioning
mtd: nand: rearrange ONFI revision checking, add ONFI 2.3
...Fix up trivial conflict in drivers/mtd/Kconfig as per DavidW.
06 Jan, 2011
6 commits
-
Initialize mtd->writebufsize to be equal to mtd->writesize.
Signed-off-by: Anatolij Gustschin
Signed-off-by: Artem Bityutskiy
Signed-off-by: David Woodhouse -
Prevent OneNAND's voltage regulator from going to sleep while
OneNAND is in use, by explicitly enabling and disabling the
regulator as appropriate.Signed-off-by: Adrian Hunter
Signed-off-by: David Woodhouse -
Add enable / disable methods called from get_device() / release_device().
These can be used, for example, to allow the driver to prevent the voltage
regulator from being put to sleep while OneNAND is in use.Signed-off-by: Adrian Hunter
Signed-off-by: David Woodhouse -
Initial bad blocks are normal but the messages look like
errors. Make the messages less scary, make the main
message an informational message not a warning, make the
message displaying registers a debug message and include
the address there instead of in the informational message.Signed-off-by: Adrian Hunter
Acked-by: Kyungmin Park
Signed-off-by: Artem Bityutskiy
Signed-off-by: David Woodhouse -
Add the ability to parse MTD partition information from the
kernel command line.Note that a pointless BUG_ON is removed, as are redundant
calls to 'del_mtd_partitions()' and 'del_mtd_device()'
because they are also done by 'onenand_release()'.Finally note that 'add_mtd_device()' returns 1 on failure
so the error condition was incorrect.Signed-off-by: Adrian Hunter
Signed-off-by: Artem Bityutskiy
Signed-off-by: David Woodhouse -
Original 4KiB pagesize chip (SLC) doesn't support Multi block erase at Spec.
Signed-off-by: Kyungmin Park
Signed-off-by: Artem Bityutskiy
Signed-off-by: David Woodhouse
22 Dec, 2010
1 commit
-
Add GPMC timings for 104MHz OneNAND.
Signed-off-by: Adrian Hunter
Signed-off-by: Tony Lindgren
04 Dec, 2010
5 commits
-
This bug becomes visible in 2x mode when chip->writesize
is different from mtd->writesize (= 2 * chip->writesize).
At this case the bad block information is read from
the first and the third physical pages instead of
the first and the second as specification states.Signed-off-by: Roman Tereshonkov
Acked-by: Kyungmin Park
Signed-off-by: David Woodhouse -
Original 4KiB pagesize chip (SLC) doesn't support OOB operations at Spec.
And it's also same at Flex-OneNAND.Remove the MLC macro if possible and use 4KiB pagesize macro since MLC has 4KiB pagesize.
Signed-off-by: Kyungmin Park
Signed-off-by: David Woodhouse -
Implement cache program feature for 4KiB page onenand.
This feature improves the write data performance.
The observed 128KiB data program speed change is
from 8827KiB/s to 14156 KiB/s when the feature is enabled.Signed-off-by: Roman Tereshonkov
Acked-by: Mike Frysinger
Signed-off-by: Artem Bityutskiy
Signed-off-by: David Woodhouse -
Some fixes are introduced into omap2 code to handle errors when
cache program feature is used.Signed-off-by: Roman Tereshonkov
Signed-off-by: Artem Bityutskiy
Signed-off-by: David Woodhouse -
When use the 2KiB pagesize, it should be set the correct page offset.
Signed-off-by: Kyungmin Park
Signed-off-by: Artem Bityutskiy
Signed-off-by: David Woodhouse
25 Oct, 2010
9 commits
-
The suspend & resume called from mtd core. So no need to call at driver.
Signed-off-by: Kyungmin Park
Signed-off-by: Artem Bityutskiy
Signed-off-by: David Woodhouse -
For 4Gib non-DDP chip it does not follow that it is always 4KiB page chip.
The number of data buffers is checked and if it is equal to 1
we suppose that it is 4KiB page onenand chip.Signed-off-by: Roman Tereshonkov
Acked-by: Kyungmin Park
Signed-off-by: Artem Bityutskiy
Signed-off-by: David Woodhouse -
S5PC210 has the same OneNAND controller as S5PC110
Signed-off-by: Kyungmin Park
Signed-off-by: David Woodhouse -
Implement DMA interrupt method. previous time it polls the DMA status.
It can reduce the CPU power but decrease the performance a little.Signed-off-by: Kyungmin Park
Signed-off-by: David Woodhouse -
When use HIGHMEM, dma_map_single doesn't get the proper DMA address.
So use the dma_map_page in this case.Signed-off-by: Kyungmin Park
Signed-off-by: David Woodhouse -
After S5PC110 use the generic method for OneNAND.
Signed-off-by: Kyungmin Park
Signed-off-by: David Woodhouse -
The MLC NAND Flash differs from the SLC NAND flash in functioning
and the cell structure. Therefore we are considering it as a
different Flash type.Signed-off-by: Rohit H.S
Signed-off-by: Raghav Gupta
Signed-off-by: Artem Bityutskiy
Signed-off-by: David Woodhouse -
There's no case timeout but add it for some H/W problem or
wrong codes implementationSigned-off-by: Kyungmin Park
Signed-off-by: Artem Bityutskiy
Signed-off-by: David Woodhouse -
S5PC110 OneNAND controller use the generic functions provided from onenand_base.
Signed-off-by: Kyungmin Park
Signed-off-by: David Woodhouse
