14 Jan, 2012
1 commit
-
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits)
rtc: max8925: Add function to work as wakeup source
mfd: Add pm ops to max8925
mfd: Convert aat2870 to dev_pm_ops
mfd: Still check other interrupts if we get a wm831x touchscreen IRQ
mfd: Introduce missing kfree in 88pm860x probe routine
mfd: Add S5M series configuration
mfd: Add s5m series irq driver
mfd: Add S5M core driver
mfd: Improve mc13xxx dt binding document
mfd: Fix stmpe section mismatch
mfd: Fix stmpe build warning
mfd: Fix STMPE I2c build failure
mfd: Constify aat2870-core i2c_device_id table
gpio: Add support for stmpe variant 801
mfd: Add support for stmpe variant 801
mfd: Add support for stmpe variant 610
mfd: Add support for STMPE SPI interface
mfd: Separate out STMPE controller and interface specific code
misc: Remove max8997-muic sysfs attributes
mfd: Remove unused wm831x_irq_data_to_mask_reg()
...Fix up trivial conflict in drivers/leds/Kconfig due to addition of
LEDS_MAX8997 and LEDS_TCA6507 next to each other.
09 Jan, 2012
2 commits
-
Make use of memory resources rather than hardcoded IO adresses.
This is a first step towards DT support.Signed-off-by: Jochen Friedrich
Signed-off-by: Samuel Ortiz -
Signed-off-by: Jochen Friedrich
Signed-off-by: Samuel Ortiz
05 Jan, 2012
1 commit
-
Hook these platforms restart code into the new restart hook rather
than using arch_reset().Signed-off-by: Russell King
29 Oct, 2011
1 commit
-
…git-cur/linux-2.6-arm
* 'devel-stable' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (178 commits)
ARM: 7139/1: fix compilation with CONFIG_ARM_ATAG_DTB_COMPAT and large TEXT_OFFSET
ARM: gic, local timers: use the request_percpu_irq() interface
ARM: gic: consolidate PPI handling
ARM: switch from NO_MACH_MEMORY_H to NEED_MACH_MEMORY_H
ARM: mach-s5p64x0: remove mach/memory.h
ARM: mach-s3c64xx: remove mach/memory.h
ARM: plat-mxc: remove mach/memory.h
ARM: mach-prima2: remove mach/memory.h
ARM: mach-zynq: remove mach/memory.h
ARM: mach-bcmring: remove mach/memory.h
ARM: mach-davinci: remove mach/memory.h
ARM: mach-pxa: remove mach/memory.h
ARM: mach-ixp4xx: remove mach/memory.h
ARM: mach-h720x: remove mach/memory.h
ARM: mach-vt8500: remove mach/memory.h
ARM: mach-s5pc100: remove mach/memory.h
ARM: mach-tegra: remove mach/memory.h
ARM: plat-tcc: remove mach/memory.h
ARM: mach-mmp: remove mach/memory.h
ARM: mach-cns3xxx: remove mach/memory.h
...Fix up mostly pretty trivial conflicts in:
- arch/arm/Kconfig
- arch/arm/include/asm/localtimer.h
- arch/arm/kernel/Makefile
- arch/arm/mach-shmobile/board-ap4evb.c
- arch/arm/mach-u300/core.c
- arch/arm/mm/dma-mapping.c
- arch/arm/mm/proc-v7.S
- arch/arm/plat-omap/Kconfig
largely due to some CONFIG option renaming (ie CONFIG_PM_SLEEP ->
CONFIG_ARM_CPU_SUSPEND for the arm-specific suspend code etc) and
addition of NEED_MACH_MEMORY_H next to HAVE_IDE.
17 Oct, 2011
4 commits
-
Remove the legacy ARM LED code for simpad devices and
register a stadard LED platform device using GPIO line
instead.Signed-off-by: Jochen Friedrich
Signed-off-by: Russell King -
Register keyboard, polled keyboard and I2C platform
devices based on GPIOs.Signed-off-by: Jochen Friedrich
Signed-off-by: Russell King -
- prepend CS3 accessors by simpad_ to indicate they
are specific to simpad devices.
- use spinlock to protect shadow register.
- implement 8 read-only pins.
- use readl/writel macros so barriers are used where
necessary.
- register CS3 as GPIO controller with 24 pins
(16 output only and 8 input only).
- fix PCMCIA driver to access the read-only pins
rather than the shadow register for status bits.Signed-off-by: Jochen Friedrich
Signed-off-by: Russell King -
Add ucb1x00 GPIO definitions to simpad.h and add gpio_base
to ucb1x00 platform device so the pins are available using
the GPIO API.Signed-off-by: Jochen Friedrich
Signed-off-by: Russell King
22 Aug, 2011
1 commit
-
Signed-off-by: Nicolas Pitre
Acked-by: Arnd Bergmann
04 Jan, 2011
1 commit
-
Since commit 7a5b4e16c880f8350d255dc188f81622905618c1, simpad devices don't
boot anymore, since platform devices are registered too early. Fix by moving
the registration from map_io to arch_initcall as done on other sa1100 boards.Signed-off-by: Jochen Friedrich
Acked-by: Kristoffer Ericson
Signed-off-by: Russell King
20 Oct, 2010
1 commit
-
Since we're now using addruart to establish the debug mapping, we can
remove the io_pg_offst and phys_io members of struct machine_desc.The various declarations were removed using the following script:
grep -rl MACHINE_START arch/arm | xargs \
sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }'[ Initial patch was from Jeremy Kerr, example script from Russell King ]
Signed-off-by: Nicolas Pitre
Acked-by: Eric Miao
07 Dec, 2009
1 commit
-
Only register devices if we have platform data for those which require
platform data.Signed-off-by: Russell King
06 Sep, 2008
1 commit
-
Signed-off-by: Russell King
07 Aug, 2008
2 commits
-
This just leaves include/asm-arm/plat-* to deal with.
Signed-off-by: Russell King
-
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h.
Then, since asm/hardware.h only exists to include asm/arch/hardware.h,
update everything to directly include asm/arch/hardware.h and remove
asm/hardware.h.Signed-off-by: Russell King
01 Jul, 2006
1 commit
-
Signed-off-by: Jörn Engel
Signed-off-by: Adrian Bunk
14 Jan, 2006
1 commit
-
Patch from Nicolas Pitre
This field is redundent since it must be equal to PHYS_OFFSET anyway.
Now that no code uses it anymore, mark it deprecated and remove all
initializations from the tree.Signed-off-by: Nicolas Pitre
Signed-off-by: Russell King
30 Oct, 2005
1 commit
-
Convert everyone who uses platform_bus_type to include
linux/platform_device.h.Signed-off-by: Russell King
Acked-by: Greg Kroah-Hartman
28 Oct, 2005
1 commit
-
Patch from Deepak Saxena
SA1100 map_desc.pfn conversion
Signed-off-by: Deepak Saxena
Signed-off-by: Russell King
18 Aug, 2005
1 commit
-
Add platform device data for the SA11x0 MCP device. This allows
platforms to customise the configuration of the SA11x0 MCP device
according to their needs.Signed-off-by: Russell King
04 Jul, 2005
1 commit
-
Remove the pointless machine description macros, favouring C99
initialisers instead.Signed-off-by: Russell King
17 Apr, 2005
1 commit
-
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.Let it rip!
