24 Aug, 2014
1 commit
-
IRQ flags can be obtained from resource structure, there are no need
to use additional field in the platform_data to store these values.
This patch removes this field and convert existing users of this driver
to use IRQ flags from the resources.Signed-off-by: Alexander Shiyan
Signed-off-by: Tejun Heo
26 Jul, 2014
1 commit
-
Signed-off-by: Steven Miao
12 Apr, 2014
5 commits
-
using IS_ENABLED() macro instead of defined(CONFIG_XXX) || defined(CONFIG_XXX_MODULE)
Signed-off-by: Steven Miao
-
In v3.2 the Analog Devices ADT75 temperature sensor driver was removed
as an IIO driver and support for it was added to the LM75 HWMON driver.
But it was apparently overlooked to rename one reference to CONFIG_ADT75
to CONFIG_SENSORS_LM75. Do so now. Use the IS_ENABLED() macro, while
we're at it.Signed-off-by: Paul Bolle
-
In v3.2 the Analog Devices AD7314 temperature sensor driver was removed
as an IIO driver and added as a HWMON driver. But it was apparently
overlooked to rename two references to CONFIG_AD7314 to
CONFIG_SENSORS_AD7314. Do so now. Use the IS_ENABLED() macro, while
we're at it.Signed-off-by: Paul Bolle
-
In v3.2 the Analog Devices ad2s1200/ad2s1205 driver was renamed from
ad2s120x to ad2s1200. But it apparently forgot to rename the references
to this driver in the BF537-STAMP code. Rename these now, and use the
IS_ENABLED() macro, while we're at it.Signed-off-by: Paul Bolle
-
There's a (rather subtle) typo in "CONFIG_SND_SOC_ADV80X_MODULE". Fix it
once and for all by using IS_ENABLED(), which is designed to avoid
issues like this.Signed-off-by: Paul Bolle
30 May, 2013
2 commits
-
The bf5x_tdm driver has been removed. Remove all references to it from board
code.Signed-off-by: Lars-Peter Clausen
Signed-off-by: Mark Brown -
The bf5xx-i2s driver now has support for TDM mode and the bf5xx-tdm driver is
going to be removed soon, so switch the driver over to bf5xx-i2s.Signed-off-by: Lars-Peter Clausen
Signed-off-by: Mark Brown
07 May, 2013
1 commit
-
This patch is from Frank.Shew,fshew@geometrics.com to fix the
following problem:having extremely slow responses with the NAND
due to timeouts on the ready status signal, which eventually
caused the watchdog to time out.Signed-off-by: Aaron Wu
Signed-off-by: Steven Miao
13 Dec, 2012
1 commit
-
Drivers common to both bf5xx and bf60x chip families may use this anomaly id.
So add it to bf5xx header files also.Signed-off-by: Sonic Zhang
Signed-off-by: Bob Liu
09 Oct, 2012
1 commit
-
Pull blackfin update from Bob Liu.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin:
Blackfin: smp: add smp_mb() to keep coherency
Blackfin: drop irq enable in init_arch_irq()
Blackfin: fix wrong place disabled irq
Blackfin: update defconfig for bf609-ezkit
Blackfin: add bf548 v0.4 revision
Blackfin: bf60x: Add bf608 and bf609 specific perpheral MMRs
Blackfin: cpufreq: fix dpm_state_table
Blackfin: bfin_gpio: proc: fix return value
Blackfin: CM-BF537E: Update SPORT support in board file.
Blackfin: bf537: fix lq035 platform device name
Blackfin: bf533-ezkit: enable flash drivers by default
08 Oct, 2012
2 commits
-
Signed-off-by: Harald Krapfenbauer
Signed-off-by: Bob Liu -
Lq035 fb driver uses KBUILD_MODNAME which is bf537_lq035 instead of
bf537-lq035.Signed-off-by: Scott Jiang
Signed-off-by: Bob Liu
18 Aug, 2012
1 commit
-
Signed-off-by: Mark Brown
17 Jul, 2012
1 commit
-
Convert the existing uses of random_ether_addr to
the new eth_random_addr.Signed-off-by: Joe Perches
Acked-by: Mike Frysinger
Signed-off-by: David S. Miller
21 May, 2012
4 commits
-
Signed-off-by: Sonic Zhang
Signed-off-by: Bob Liu -
Change ADI BSD license to standart 3 clause BSD license for some blackfin arch
code requested by ADI Legal.Signed-off-by: Sonic Zhang
Signed-off-by: Bob Liu -
Blackfin sport driver has been rewrited update board file according.
Signed-off-by: Aaron Wu
Signed-off-by: Bob Liu -
Signed-off-by: Sonic Zhang
Signed-off-by: Bob Liu
21 Mar, 2012
4 commits
-
arch/blackfin/mach-bf537/boards/pnav10.c includes 'linux/export.h'
twice. No need to include the file a second time in a #ifdef block
if already included at top. Remove the duplicate.Signed-off-by: Danny Kukawka
Signed-off-by: Mike Frysinger
Signed-off-by: Bob Liu -
Changed bfin_get_ether_addr() to return a state and to
set no random mac address if the board don't provide one.Let the caller of bfin_get_ether_addr() set a random mac
address if the return value is not 0.v2: don't set random mac in bfin_get_ether_addr()
Signed-off-by: Danny Kukawka
Acked-by: Mike Frysinger
Signed-off-by: David S. Miller
Signed-off-by: Bob Liu -
we can pass sport enable pin through platform data
if customer board has reset pin, add it in ad73311_gpio array
and modify id to 2Signed-off-by: Scott Jiang
Signed-off-by: Bob Liu -
Signed-off-by: Scott Jiang
Signed-off-by: Bob Liu
09 Jan, 2012
3 commits
-
Signed-off-by: Scott Jiang
Signed-off-by: Bob Liu -
spi sport driver can support any gpio as its cs pin.
Signed-off-by: Scott Jiang
Signed-off-by: Bob Liu -
Macro name for spi controller driver has been modified, so update default
board file accordingly.Signed-off-by: Sonic Zhang
Signed-off-by: Bob Liu
14 Nov, 2011
2 commits
-
Commit 8dc7a9c84 ("blackfin: Add export.h to files using
EXPORT_SYMBOL/THIS_MODULE") inserted some of the include statements into
sections protected by an unrelated #if CONFIG_... statement. This can cause,
depending on the configuration used, warnings like this one:arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: data definition has no type or storage class
arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL’
arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: parameter names (without types) in function declarationThis patch fixes it by moving the includes out of the #if protected sections.
Signed-off-by: Lars-Peter Clausen
Acked-by: Mike Frysinger
Signed-off-by: Bob Liu -
The serial TX IRQ is not simply (RX IRQ + 1) on some Blackfin chips,
so move the values to the platform resources.Signed-off-by: Sonic Zhang
Signed-off-by: Mike Frysinger
Signed-off-by: Bob Liu
01 Nov, 2011
1 commit
-
These particular files were just assuming that module.h was
somehow in the include paths. Give them the more minimalist
header file explicitly.Signed-off-by: Paul Gortmaker
26 Oct, 2011
7 commits
-
This flag is a NOOP and can be removed now.
Signed-off-by: Yong Zhang
Acked-by: Bob Liu
Signed-off-by: Mike Frysinger -
Remove i2c_board_info for driver that doesn't exist anymore.
Delete irq_flags for drivers that don't use them anymore.Signed-off-by: Michael Hennerich
Signed-off-by: Mike Frysinger -
Signed-off-by: Lars-Peter Clausen
Signed-off-by: Scott Jiang
Signed-off-by: Mike Frysinger -
There is already an entry in the spi device table for the codec, but the
modalias was wrong. Also the config symbol name for the codec is wrong,
so this is fixed as well.Signed-off-by: Lars-Peter Clausen
Signed-off-by: Scott Jiang
Signed-off-by: Mike Frysinger -
Signed-off-by: Lars-Peter Clausen
Signed-off-by: Scott Jiang
Signed-off-by: Mike Frysinger -
SND_BF5XX_SOC is for machine drivers while SND_SOC is for codec drivers.
Signed-off-by: Scott Jiang
Signed-off-by: Mike Frysinger -
The ASoC codec name is "ad1836" and not "ad183x" as the change to rename
things ultimately did not get merged.Signed-off-by: Scott Jiang
Signed-off-by: Mike Frysinger
23 Jul, 2011
3 commits
-
The pcm driver name has been changed, but the device name has not.
Signed-off-by: Scott Jiang
Signed-off-by: Mike Frysinger -
Signed-off-by: Mike Frysinger
-
The default for the Blackfin SPI driver is 8 bits and dma disabled,
so many of the bfin5xx_spi_chip resources are redundant. So punt
those parts.Further, drivers should themselves be declaring 16 bit transfers,
so for those that do, and for the ones which no longer do 16 bit
transfers, drop the bfin5xx_spi_chip resources.Signed-off-by: Mike Frysinger
