Eric Lee / smarc-uboot

07 May, 2018

1 commit

  • 83d290c56   SPDX: Convert all of our single license tags to Linux Kernel style ... Browse Code »
    56

    When U-Boot started using SPDX tags we were among the early adopters and
    there weren't a lot of other examples to borrow from. So we picked the
    area of the file that usually had a full license text and replaced it
    with an appropriate SPDX-License-Identifier: entry. Since then, the
    Linux Kernel has adopted SPDX tags and they place it as the very first
    line in a file (except where shebangs are used, then it's second line)
    and with slightly different comment styles than us.

    In part due to community overlap, in part due to better tag visibility
    and in part for other minor reasons, switch over to that style.

    This commit changes all instances where we have a single declared
    license in the tag as both the before and after are identical in tag
    contents. There's also a few places where I found we did not have a tag
    and have introduced one.

    Signed-off-by: Tom Rini

    Tom Rini
     

24 Sep, 2016

1 commit

20 Jan, 2015

1 commit

29 Oct, 2014

1 commit

  • 2e07c249a   kconfig: arm: introduce symbol for ARM CPUs ... Browse Code »
    215

    This commit introduces a Kconfig symbol for each ARM CPU:
    CPU_ARM720T, CPU_ARM920T, CPU_ARM926EJS, CPU_ARM946ES, CPU_ARM1136,
    CPU_ARM1176, CPU_V7, CPU_PXA, CPU_SA1100.
    Also, it adds the CPU feature Kconfig symbol HAS_VBAR which is selected
    for CPU_ARM1176 and CPU_V7.

    For each target, the corresponding CPU is selected and the definition of
    SYS_CPU in the corresponding Kconfig file is removed.

    Also, it removes redundant "string" type in some Kconfig files.

    Signed-off-by: Georges Savoundararadj
    Acked-by: Albert ARIBAUD
    Cc: Masahiro Yamada

    Georges Savoundararadj
     

25 Sep, 2014

1 commit

  • 535aad29f   MAINTAINERS: comment out blank M: field ... Browse Code »

    Since commit ddaf5c8f3030050fcd356a1e49e3ee8f8f52c6d4
    (patman: RunPipe() should not pipe stdout/stderr unless asked),
    Patman spits lots of "Invalid MAINTAINERS address: '-'"
    error messages for patches with global changes.
    It takes too long for Patman to process them.

    Anyway, "M: -" does not carry any important information.
    Rather, it is just like a place holder in case of assigning
    a new board maintainer. Let's comment out.

    This commit can be reproduced by the following command:

    find . -name MAINTAINERS | xargs sed -i -e '/^M:[[:blank:]]*-$/s/^/#/'

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

14 Sep, 2014

1 commit

  • 461be2f96   kconfig: remove redundant "string" type in arch and board Kconfigs ... Browse Code »
    43

    Now the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME}
    are specified in arch/Kconfig.

    We can delete the ones in arch and board Kconfig files.

    This commit can be easily reproduced by the following command:

    find . -name Kconfig -a ! -path ./arch/Kconfig | xargs sed -i -e '
    /config[[:space:]]SYS_\(ARCH\|CPU\|SOC\|\VENDOR\|BOARD\|CONFIG_NAME\)/ {
    N
    s/\n[[:space:]]*string//
    }
    '

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

30 Jul, 2014

2 commits

  • 93d4334f7   Add board MAINTAINERS files ... Browse Code »

    We have switched to Kconfig and the boards.cfg file is going to
    be removed. We have to retrieve the board status and maintainers
    information from it.

    The MAINTAINERS format as in Linux Kernel would be nice
    because we can crib the scripts/get_maintainer.pl script.

    After some discussion, we chose to put a MAINTAINERS file under each
    board directory, not the top-level one because we want to collect
    relevant information for a board into a single place.

    TODO:
    Modify get_maintainer.pl to scan multiple MAINTAINERS files.

    Signed-off-by: Masahiro Yamada
    Suggested-by: Tom Rini
    Acked-by: Simon Glass

    Masahiro Yamada
     
  • dd84058d2   kconfig: add board Kconfig and defconfig files ... Browse Code »

    This commit adds:
    - arch/${ARCH}/Kconfig
    provide a menu to select target boards
    - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
    set CONFIG macros to the appropriate values for each board
    - configs/${TARGET_BOARD}_defconfig
    default setting of each board

    (This commit was automatically generated by a conversion script
    based on boards.cfg)

    In Linux Kernel, defconfig files are located under
    arch/${ARCH}/configs/ directory.
    It works in Linux Kernel since ARCH is always given from the
    command line for cross compile.

    But in U-Boot, ARCH is not given from the command line.
    Which means we cannot know ARCH until the board configuration is done.
    That is why all the "*_defconfig" files should be gathered into a
    single directory ./configs/.

    Signed-off-by: Masahiro Yamada
    Acked-by: Simon Glass

    Masahiro Yamada
     

01 Nov, 2013

1 commit

24 Jul, 2013

1 commit

05 May, 2013

1 commit

16 Mar, 2013

1 commit

  • 3929fb0a1   Replace __bss_end__ with __bss_end ... Browse Code »

    Note this is a tree-wide change affecting multiple architectures.

    At present we use __bss_start, but mostly __bss_end__. This seems
    inconsistent and in a number of places __bss_end is used instead.

    Change to use __bss_end for the BSS end symbol throughout U-Boot. This
    makes it possible to use the asm-generic/sections.h file on all
    archs.

    Signed-off-by: Simon Glass

    Simon Glass
     

22 Jan, 2013

1 commit

  • 71a988aa6   imximage.cfg: run files through C preprocessor ... Browse Code »

    The '#' used as comments in the files cause the preprocessor
    trouble, so change to /* */.

    The mkimage command which uses this preprocessor output
    was moved to arch/arm/imx-common/Makefile

    .gitignore was updated to ignore .cfgtmp files.

    Signed-off-by: Troy Kisky

    Troy Kisky
     

21 Jan, 2013

1 commit

12 Dec, 2012

1 commit

08 Dec, 2012

1 commit

  • 05a860c22   Merge branch 'master' of git://git.denx.de/u-boot into master ... Browse Code »

    Conflicts:
    drivers/power/power_fsl.c
    include/configs/mx35pdk.h
    include/configs/mx53loco.h
    include/configs/woodburn_common.h
    board/woodburn/woodburn.c

    These boards still use the old old PMIC framework, so they
    do not merge properly after the power framework was merged into
    mainline.

    Fix all conflicts and update woodburn to use Power Framework.

    Signed-off-by: Stefano Babic

    Stefano Babic
     

26 Oct, 2012

1 commit

  • d81b27a24   MX35: add support for woodburn board ... Browse Code »

    The woodburn board is based on the MX35 SOC.
    Support for both external (NOR) and internal
    (SD Card) boot mode are added. It uses the
    generic SPL framework to implement the internal boot
    mode.

    The following peripherals are supported:
    - Ethernet (FEC)
    - SD Card
    - NAND (512 MB)
    - NOR Flash

    In the internal boot mode, a simple imximage header
    is generated to set the address in internal RAM
    where the SOC must copy the SPL code. The initial setup
    is then demanded to the SPL itself.

    Signed-off-by: Stefano Babic

    Stefano Babic