Eric Lee / smarc-uboot

07 Feb, 2020

1 commit

04 Feb, 2020

1 commit

23 Jan, 2020

1 commit

26 Dec, 2019

1 commit

  • 5d168adf2   configs: Enable SPL_FSL_PBL for some LayerScape platforms ... Browse Code »

    In commit , SPL_FSL_PBL is removed from the configs of
    some LayerScape platforms. Actually, SPL_FSL_PBL is needed for SD/NAND
    boot on LS1021A/LS1043A/LS1046A to create boot binary having SPL binary
    in PBI format concatenated with u-boot binary. SPL_FRAMEWORK is used on
    these platforms too.

    Signed-off-by: Alison Wang
    Reviewed-by: Priyanka Jain

    Alison Wang
     

04 Dec, 2019

1 commit

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

23 Sep, 2019

1 commit

14 Aug, 2019

1 commit

26 Jul, 2019

1 commit

  • f588b4d20   arm: ls1021atwr: Convert to use driver model TSEC driver ... Browse Code »

    Now that we have added driver model support to the TSEC driver,
    convert ls1021atwr board to use it.

    This depends on previous DM series for ls1021atwr:
    http://patchwork.ozlabs.org/patch/561855/

    Signed-off-by: Bin Meng
    Signed-off-by: Vladimir Oltean
    Acked-by: Joe Hershberger

    [Vladimir] Made the following changes:
    - Added 'status = "disabled";' for all Ethernet ports in ls1021a.dtsi
    - Fixed the confusion between the SGMII/TBI PCS for enet0 and enet1 -
    a mistake ported over from Linux. Each SGMII PCS lies on the private
    MDIO bus of the interface (and the RGMII enet2 has no SGMII PCS).
    - Added CONFIG_DM_ETH to all ls1021atwr_* defconfigs
    - Completely removed non-DM_ETH support from ls1021atwr
    - Changed "compatible" string from "fsl,tsec-mdio" to "fsl,etsec2-mdio"
    and from "fsl,tsec" to "fsl,etsec2" to match Linux

    Bin Meng
     

15 Jun, 2019

1 commit

30 Apr, 2019

2 commits

19 Feb, 2019

1 commit

08 Jan, 2019

1 commit

20 Oct, 2018

1 commit

27 Sep, 2018

1 commit

04 Sep, 2018

1 commit

18 Aug, 2018

2 commits

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

04 Jun, 2018

1 commit

09 Apr, 2018

2 commits

08 Apr, 2018

1 commit

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

31 Oct, 2017

1 commit

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

28 Aug, 2017

1 commit

15 Aug, 2017

2 commits

11 Aug, 2017

2 commits

10 Aug, 2017

1 commit

09 Aug, 2017

1 commit

08 Aug, 2017

1 commit

01 Aug, 2017

1 commit

  • a65d74082   arm: ls1021atwr: Add distro boot support ... Browse Code »

    This patch includes common config_distro_defaults.h and
    config_distro_bootcmd.h for u-boot enviroments to support distro boot
    which automatically scan boot.scr from storage devices(e.g.
    SD/USB/SATA/SCSI disk) and execute autoboot script on LS1021ATWR board.

    Signed-off-by: Shengzhou Liu
    Signed-off-by: Alison Wang
    Reviewed-by: York Sun

    Alison Wang
     

26 Jul, 2017

1 commit

  • 2be296538   Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig ... Browse Code »
    20

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_MMC
    CONFIG_ENV_IS_IN_NAND
    CONFIG_ENV_IS_IN_UBI
    CONFIG_ENV_IS_NOWHERE

    In fact this already exists for sunxi as a 'choice' config. However not
    all the choices are available in Kconfig yet so we cannot use that. It
    would lead to more than one option being set.

    In addition, one purpose of this series is to allow the environment to be
    stored in more than one place. So the existing choice is converted to a
    normal config allowing each option to be set independently.

    There are not many opportunities for Kconfig updates to reduce the size of
    this patch. This was tested with

    ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

    And then manual updates. This is because for CHAIN_OF_TRUST boards they
    can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
    now.

    Signed-off-by: Simon Glass
    Signed-off-by: Tom Rini

    Simon Glass
     

01 May, 2017

1 commit

30 Apr, 2017

1 commit