Eric Lee / smarc-uboot

06 May, 2020

1 commit

  • 5825f134b   MLK-18476-3 configs: mx6qdl_arm2: Add defconfigs for MX6Q/DL ARM2 ... Browse Code »

    Add defconfigs for iMX6Q/DL/6QPOP DDR3 and LPDDR2 ARM2 boards to
    support SD boot and plugin.

    Signed-off-by: Ye Li
    (cherry picked from commit ba99b856ac290c298c9be5ef6f6f6229b1d9f539)
    (cherry picked from commit 66085d2abe610afbf81f58d778dab5766c55909c)
    (cherry picked from commit d9f17d51a3a19c331d19d47d88a1ffc50e2f62cd)

    Ye Li
     

05 Dec, 2019

1 commit

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

24 Aug, 2019

1 commit

23 Jun, 2019

1 commit

30 Apr, 2019

1 commit

19 Jan, 2019

1 commit

  • 2acc24fc2   Kconfig: Migrate BOUNCE_BUFFER ... Browse Code »

    The bounce buffer is used by a few drivers (most of the MMC drivers)
    to overcome limitations in their respective DMA implementation.

    This moves the configuration to Kconfig and makes it user-selectable
    (even though it will be a required feature to make those drivers
    work): the expected usage is for drivers depending on this to 'select'
    it unconditionally from their respective Kconfig (see follow-up
    patches).

    This commit includes a full migration using moveconfig.py to ensure
    that each commit compiles. To ensure bisectability we update
    dependencies of various drivers to now select BOUNCE_BUFFER when needed.

    [trini: Squash all patches to ensure bisectability]
    Signed-off-by: Tom Rini
    Signed-off-by: Philipp Tomsich
    Reviewed-by: Otavio Salvador [dw_mmc portion]
    Reviewed-by: Fabio Estevam [mxsmmc portion]
    Reviewed-by: Simon Glass [tegra portion]

    Philipp Tomsich
     

18 Aug, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

09 Apr, 2018

1 commit

24 Feb, 2018

1 commit

  • d021e9421   Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_BOOTP_BOOTPATH
    CONFIG_BOOTP_DNS
    CONFIG_BOOTP_GATEWAY
    CONFIG_BOOTP_HOSTNAME
    CONFIG_BOOTP_PXE
    CONFIG_BOOTP_SUBNETMASK
    CONFIG_CMDLINE_EDITING
    CONFIG_AUTO_COMPLETE
    CONFIG_SYS_LONGHELP
    CONFIG_SUPPORT_RAW_INITRD
    CONFIG_ENV_VARS_UBOOT_CONFIG

    Signed-off-by: Adam Ford
    [trini: Re-run the migration]
    Signed-off-by: Tom Rini

    Adam Ford
     

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

08 Sep, 2017

2 commits

28 Aug, 2017

1 commit

15 Aug, 2017

1 commit

26 Jul, 2017

1 commit

  • 2be296538   Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig ... Browse Code »
    20

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_MMC
    CONFIG_ENV_IS_IN_NAND
    CONFIG_ENV_IS_IN_UBI
    CONFIG_ENV_IS_NOWHERE

    In fact this already exists for sunxi as a 'choice' config. However not
    all the choices are available in Kconfig yet so we cannot use that. It
    would lead to more than one option being set.

    In addition, one purpose of this series is to allow the environment to be
    stored in more than one place. So the existing choice is converted to a
    normal config allowing each option to be set independently.

    There are not many opportunities for Kconfig updates to reduce the size of
    this patch. This was tested with

    ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

    And then manual updates. This is because for CHAIN_OF_TRUST boards they
    can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
    now.

    Signed-off-by: Simon Glass
    Signed-off-by: Tom Rini

    Simon Glass
     

30 Apr, 2017

1 commit

26 Jan, 2017

1 commit

10 Sep, 2016

1 commit

17 Jun, 2016

1 commit

26 Apr, 2016

3 commits

15 Mar, 2016

1 commit

19 Nov, 2015

1 commit

02 Sep, 2015

1 commit

  • 21782828f   imx: mx6 move TARGET_xx Kconfig option to mx6 specific Kconfig file ... Browse Code »
    68

    Move TARGET_xx Kconfig option based on mx6 to arch/arm/cpu/armv7/mx6/Kconfig.
    Add enable "CONFIG_ARCH_MX6" for boards based on mx6.
    Then we can choose target boards using "make ARCH=arm menuconfig"
    with ARCH_MX6 defined.

    If using original way, we have no chance to enable ARCH_MX6 when
    "make menuconfig". Even define CONFIG_ARCH_MX6=y in xx_defconfig,
    kconfig will complains "arch/../configs/platinum_titanium_defconfig:3:
    warning: override: TARGET_PLATINUM_TITANIUM changes choice state"

    Signed-off-by: Peng Fan
    Cc: Stefano Babic
    Cc: Heiko Schocher
    Cc: Tim Harvey
    Cc: Eric Bénard
    Cc: Fabio Estevam
    Cc: Eric Nelson
    Cc: Marek Vasut
    Cc: Christian Gmeiner
    Cc: Stefan Roese
    Cc: Soeren Moch
    Cc: Otavio Salvador
    Acked-by: Stefano Babic
    Acked-by: Soeren Moch
    Acked-by: Otavio Salvador
    Acked-by: Christian Gmeiner

    Peng Fan
     

26 Jun, 2015

1 commit

01 Jun, 2015

1 commit

13 May, 2015

1 commit

  • bd328eb38   Clean all defconfigs with savedefconfig ... Browse Code »

    In order to reduce merge conflicts and to maintain the simplest possible
    defconfig files, we should be using the savedefconfig feature of Kconfig
    every time a new feature is added. This keeps the defconfig settings to
    a minimum (only those things not default) and keeps them in the same
    order as the Kconfig options.

    Signed-off-by: Joe Hershberger
    Cc: Masahiro Yamada
    Acked-by: Stephen Warren
    Cc: Tom Rini

    Joe Hershberger
     

30 Sep, 2014

2 commits

  • 661139faf   imx: mx6dlarm2: Add support for i.MX6Q/DL arm2 LPDDR2 boards ... Browse Code »

    Update the ddr scripts for LPDDR2 and add two build configs for LPDDR2
    arm2 board. Since the LPDDR2 arm2 board has different DDR size, use
    CONFIG_DDR_MB in defconfig to replace the PHYS_SDRAM_SIZE.

    Signed-off-by: Ye.Li

    Ye.Li
     
  • b357503f1   imx: mx6dlarm2: Add support for i.MX6DL arm2 DDR3 board ... Browse Code »

    This patch adds the i.MX6DL arm2 board support. The i.MX6DL ARM2
    shared the same board with i.MX6Q ARM2 board since the i.MX6DL is
    pin-pin compatible with i.MX6Q.

    The patch also support the DDR 32-BIT mode option. Please define
    CONFIG_DDR_32BIT in the board configure file to enable DDR 32-BIT
    mode.But due to the board design, it's 64bit DDR buswidth physically,
    so, if you CONFIG_DDR_32BIT, the DDR memory size will be half of it.

    Signed-off-by: Ye.Li

    Ye.Li