14 Jan, 2020
1 commit
-
Convert another option Kconfig.
Reported-by: Robert P. J. Day
Signed-off-by: Michal Simek
05 Dec, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
21 Nov, 2019
1 commit
-
Today in initr_reloc_global_data() we use some non-obvious tests to
determine if we need to relocate the env_addr within gd or not. In
order to facilitate migration of other symbols to Kconfig we need to
introduce a new symbol for this particular use case.Cc: Wolfgang Denk
Cc: Joe Hershberger
Signed-off-by: Tom Rini
08 Nov, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
24 Oct, 2019
2 commits
-
Enable the SPI flash Bank/Extended address register support for all ZynqMP
boards.Signed-off-by: Michal Simek
-
This patch removes 4K sector size support for ZynqMP mini qspi
configuration in favour of fast erase speed.Signed-off-by: Siva Durga Prasad Paladugu
Signed-off-by: Michal Simek
08 Oct, 2019
2 commits
-
All boards are using the same prompt that's why add it as default value to
Kconfig to simplify defconfigs.Signed-off-by: Michal Simek
Reviewed-by: Luca Ceresoli -
Define default address via Kconfig. There is no need to change this address
for most of the boards but it is also possible. This one line save a lot of
lines in defconfigs that's why make sense to do it.The similar change has been done by commit 9340d8fe8beb
("sunxi: move CONFIG_SPL_TEXT_BASE from *_defconfig to Kconfig")Signed-off-by: Michal Simek
Reviewed-by: Luca Ceresoli
23 Sep, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
12 Jul, 2019
1 commit
-
The name CONFIG_LEGACY_IMAGE_FORMAT reads slightly better along with
allowing us to avoid a rather nasty Kbuild/Kconfig issue down the line
with CONFIG_IS_ENABLED(IMAGE_FORMAT_LEGACY). In a few places outside of
cmd/ switch to using CONFIG_IS_ENABLED() to test what is set.Signed-off-by: Tom Rini
18 May, 2019
1 commit
-
CONFIG_SYS_[DI]CACHE_OFF had been partially converted to Kconfig
parameters; only for the ARC architecture. This patch turns these two
parameters into Kconfig items everywhere else they are found.All of the include/configs/* and defconfig changes in this patch are
for arm machines only. The Kconfig changes for arc, nds32, riscv,
and xtensa have been included since these symbols are found in code
under arch/{arc,nds32,riscv,xtensa}, however, no currently-defined
include/configs/* or defconfigs for these architectures exist which
include these symbols.These results have been confirmed with tools/moveconfig.py.
Acked-by: Alexey Brodkin
Signed-off-by: Trevor Woerner
[trini: Re-migrate for a few more boards]
Signed-off-by: Tom Rini
30 Apr, 2019
2 commits
-
Moved CONFIG_SPL_TEXT_BASE to common/spl/Kconfig and migrate existing
values.Signed-off-by: Simon Goldschmidt
[trini: Re-run migration]
Signed-off-by: Tom Rini -
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
16 Apr, 2019
1 commit
-
Remove unneeded configs from mini qspi configuration
so that it saves space for this mini configuration.Signed-off-by: Siva Durga Prasad Paladugu
Signed-off-by: Michal Simek
07 Feb, 2019
2 commits
-
Now that new SPI NOR layer uses stateless 4 byte opcodes by default,
don't enable SPI_FLASH_BAR. For SPI controllers that cannot support
4-byte addressing, (stm32_qspi.c, fsl_qspi.c, mtk_qspi.c, ich.c,
renesas_rpc_spi.c) add an imply clause to enable SPI_FLASH_BAR so as to
not break functionality.Signed-off-by: Vignesh R
Tested-by: Simon Goldschmidt
Tested-by: Stefan Roese
Tested-by: Horatiu Vultur
Reviewed-by: Jagan Teki
Tested-by: Jagan Teki #zynq-microzed -
SF_DUAL_FLASH claims to enable support for SF_DUAL_STACKED_FLASH and
SF_DUAL_PARALLEL_FLASH. But, in current U-Boot code, grepping for above
enums yield no user and therefore support seems to be incomplete. Remove
these configs so as to avoid confusion.Signed-off-by: Vignesh R
Reviewed-by: Jagan Teki
Tested-by: Jagan Teki #zynq-microzed
24 Jan, 2019
2 commits
-
Enable ISSI flash for platforms. Xilinx reference boards are also used
internally with different flash part to increase coverage that's why
enable also ISSI parts for all these boards even if that board is
released only with one part.Signed-off-by: Michal Simek
-
Select DM_SPI/DM_SPI_FLASH for the whole SoC.
Signed-off-by: Michal Simek
08 Jan, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
30 Nov, 2018
1 commit
-
There is no reason to have huge space for variables because none is
using that. But there are some which are setup automatically.baudrate=115200
fdtcontroladdr=ffffa0d0
stderr=dcc
stdin=dcc
stdout=dccEnvironment size: 72/124 bytes
Signed-off-by: Michal Simek
29 Nov, 2018
2 commits
-
Wire up mini_qspi SPL with zcu102 for testing purpose.
Normally mini u-boot runs with FSBL/SPL for certain board.
Enabling SPL and configuration from zcu102 helps with testing.Signed-off-by: Michal Simek
-
There is no reason to have autoboot enabled because it should never
start anything automatically.Signed-off-by: Michal Simek
16 Oct, 2018
1 commit
-
Simplify defconfig for ZynqMP but keep option not to enable it for mini
targets.Signed-off-by: Michal Simek
26 Sep, 2018
1 commit
-
Disable BOARD_LATE_INIT via Kconfig.
Signed-off-by: Michal Simek
04 Sep, 2018
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
17 Aug, 2018
1 commit
-
We have the following cases:
- CONFIG_NR_DRAM_BANKS was defined, migrate normally
- CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
- CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
2), set this to 8.Signed-off-by: Tom Rini
19 Jul, 2018
2 commits
-
Mini targets are using different ENV_SIZE then standard one that's why
defconfigs should be updated to simplify config files.Signed-off-by: Michal Simek
-
Add configuration files/dtses for mini u-boot configuration
which runs on smaller footprint of internal memory. This
configuration has only required qspi flash support and it
uses DCC as serial.Signed-off-by: Siva Durga Prasad Paladugu
Signed-off-by: Michal Simek