Eric Lee / smarc-uboot

23 Jan, 2020

1 commit

05 Dec, 2019

1 commit

21 Nov, 2019

1 commit

  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

08 Nov, 2019

1 commit

24 Oct, 2019

1 commit

  • c4690c54b   ARM: zynq: Move BOOTM_NETBSD to Kconfig ... Browse Code »

    The commit 4b0bcfa7c4ec ("Kconfig: Migrate CONFIG_BOOTM_* options")
    moved BOOTM_ options to Kconfig that's why align zynq defconfig with it.

    Disabling NETBSD was done by commit d6f48ea5ce18
    ("ARM: zynq: Do not enable NETBSD support by default").

    Signed-off-by: Michal Simek

    Michal Simek
     

08 Oct, 2019

1 commit

26 Aug, 2019

1 commit

02 Aug, 2019

1 commit

  • 37304aaf6   Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig ... Browse Code »
    4

    This converts the following to Kconfig:
    CONFIG_USE_PREBOOT
    CONFIG_PREBOOT

    Both are together in one commit, since otherwise the former causes kconfig
    to define the latter, which gives duplicate symbol errors.

    Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the
    backslash lands in the wrong place. Similarly with socfpga_vining_fpga.

    Signed-off-by: Simon Glass

    Simon Glass
     

12 Jul, 2019

1 commit

15 Jun, 2019

1 commit

18 May, 2019

1 commit

  • 100150254   CONFIG_SPL_SYS_[DI]CACHE_OFF: add ... Browse Code »

    While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
    where these configuration items are conditional on SPL. This commit adds SPL
    variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
    the configurations as required.

    Acked-by: Alexey Brodkin
    Signed-off-by: Trevor Woerner
    [trini: Make the default depend on the setting for full U-Boot, update
    more zynq hardware]
    Signed-off-by: Tom Rini

    Trevor Woerner
     

30 Apr, 2019

1 commit

26 Mar, 2019

1 commit

  • 14453fbfa   Convert CONFIG_SF_DEFAULT_* to Kconfig ... Browse Code »
    36

    This converts the following to Kconfig:
    CONFIG_SF_DEFAULT_BUS
    CONFIG_SF_DEFAULT_CS
    CONFIG_SF_DEFAULT_MODE
    CONFIG_SF_DEFAULT_SPEED

    I use moveconfig script and then manual check on generated u-boot.cfg
    to solve the remaining issue.

    Signed-off-by: Patrick Delaunay

    Patrick Delaunay
     

14 Feb, 2019

1 commit

  • d13f92b74   ARM: zynq: Run distribution boot commands first ... Browse Code »

    This patch is doing two things.
    1. Exchanging order of boot commands. distro_bootcmd is run first
    followed by Xilinx boot command.
    2. Remove CONFIG_BOOTCOMMAND from configs (and follow mainline) by
    creating Xilinx distribution bootcommand and wiring it as the last
    bootcommand.

    QSPI, NAND distribution boot command will be added later.

    Signed-off-by: Michal Simek

    Michal Simek
     

07 Feb, 2019

1 commit

  • 6d8251783   configs: Don't use SPI_FLASH_BAR as default ... Browse Code »
    12

    Now that new SPI NOR layer uses stateless 4 byte opcodes by default,
    don't enable SPI_FLASH_BAR. For SPI controllers that cannot support
    4-byte addressing, (stm32_qspi.c, fsl_qspi.c, mtk_qspi.c, ich.c,
    renesas_rpc_spi.c) add an imply clause to enable SPI_FLASH_BAR so as to
    not break functionality.

    Signed-off-by: Vignesh R
    Tested-by: Simon Goldschmidt
    Tested-by: Stefan Roese
    Tested-by: Horatiu Vultur
    Reviewed-by: Jagan Teki
    Tested-by: Jagan Teki #zynq-microzed

    Vignesh R
     

04 Sep, 2018

1 commit

18 Aug, 2018

1 commit

06 Aug, 2018

1 commit

04 Jun, 2018

1 commit

11 May, 2018

1 commit

  • 0b4b82ad1   arm: zynq: Remove checkboard and enable DISPLAY_CPUINFO ... Browse Code »

    Now that showing silicon version is part of the CPU
    info display, let's remove checkboard().

    Note that the generic show_board_info() will still
    show the DT 'model' property. For instance:

    U-Boot 2018.05-rc2-00025-g611b3ee0159b (Apr 19 2018 - 11:23:12 +0200)

    CPU: Zynq 7z045
    Silicon: v1.0
    Model: Zynq ZC706 Development Board
    I2C: ready

    Based on patches from Ariel D'Alessandro ,
    and Ezequiel Garcia

    mini configuration doesn't need to show this information.

    Signed-off-by: Michal Simek

    Michal Simek
     

28 Apr, 2018

1 commit

17 Apr, 2018

1 commit

  • 4f67b93fb   part: Disable CONFIG_SPL_ISO_PARTITION by default ... Browse Code »

    We enabled CONFIG_ISO_PARTITION by default for distro boot, so that U-Boot
    could load distro images that usually get shipped as iso images. These images
    usually come with a board agnostic boot environment.

    However, there is very little point in having ISO support enabled (for anyone
    really) in SPL, as the whole idea of SPL is to load U-Boot proper which again
    is board specific. So the fact that we enable ISO support in U-Boot proper does
    not mean at all that we want ISO support in U-Boot SPL.

    Hence, let's remove the Kconfig dependency. Along the way, let's also clean up
    all those default configs that disabled SPL ISO support.

    Signed-off-by: Alexander Graf

    Alexander Graf
     

12 Apr, 2018

1 commit

23 Mar, 2018

1 commit

01 Mar, 2018

1 commit

23 Feb, 2018

1 commit

30 Jan, 2018

6 commits

15 Dec, 2017

1 commit

28 Nov, 2017

5 commits

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

28 Aug, 2017

1 commit