24 Feb, 2014
1 commit
-
Signed-off-by: Masahiro Yamada
Cc: Tom Warren
Cc: Stephen Warren
Cc: Rajeshwari Birje
Cc: Inderpal Singh
22 Feb, 2014
3 commits
-
This function has been around for powerpc. It is used for systems with
memory more than CONFIG_MAX_MEM_MAPPED. In case of non-contiguous memory,
this feature can limit U-boot to one block without going over the limit.Signed-off-by: York Sun
Acked-by: Albert ARIBAUD -
Freescale LayerScape SoCs support controller interleaving on 256 byte size.
This interleaving is mandoratory.Signed-off-by: York Sun
-
Initially it was believed the DDR controller on Freescale ARM would have
big endian. But some platform will have little endian.Signed-off-by: York Sun
21 Feb, 2014
4 commits
-
We have an unused FAT implementation in fs/fdos, remove.
Signed-off-by: Tom Rini
-
Proper spelling of the boad marketing name is with upper case.
So changing it from lower case to upper case here.Cc: Tom Rini
Signed-off-by: Alexey Brodkin
20 Feb, 2014
10 commits
-
Conflicts:
Makefile
drivers/net/npe/MakefileThese two conflicts arise from commit 0b2d3f20
("ARM: NET: Remove the IXP NPE ethernet driver") and are
resolved by deleting the drivers/net/npe/Makefile file
and removing the CONFIG_IXP4XX_NPE line from Makefile. -
Having CONFIG_SYS_I2C_BASE requires DW I2C driver to explicitly include
which other platforms may not have at all.It's always good to have a driver platform-independent.
Signed-off-by: Alexey Brodkin
Cc: Tom Rini
Cc: Heiko Schocher
Cc: Stefan Roese
Cc: Vipin Kumar
Cc: Armando Visconti -
Adds support for set-speed on the OMAP24xx I2C Adapter.
Changes to omap24_i2c_write(...) for polling ARDY Bit from IRQ-Status.
Otherwise on a subsequent call the transfer of last byte from the
predecessor is aborted and therefore lost. For exmaple when
i2c_write(...) is followed by a i2c_setspeed(...) (which has to
deactivate and activate master for changing psc,...).Minor cosmetical changes.
Signed-off-by: Hannes Petermaier
Cc: Heiko Schocher -
Initialize the second i2c controller.
Signed-off-by: Michael Burr
Signed-off-by: Michal Simek -
- When CONFIG_DISPLAY_CPUINFO is not enabled,
print_cpuinfo() should be defined as an empty function
in a header, include/common.h- Remove #ifdef CONFIG_DISPLAY_CPUINFO .. #endif
from caller, common/board_f.c and arch/arm/lib/board.c- Remove redundant prototypes in arch/arm/lib/board.c,
arch/arm/include/asm/arch-am33x/sys_proto.h and
board/nokia/rx51/rx51.h, keeping the one in include/common.h- Add #ifdef CONFIG_DISPLAY_CPUINFO to the func definition
where it is missingSigned-off-by: Masahiro Yamada
-
Signed-off-by: Masahiro Yamada
-
CONFIG_SYS_GBL_DATA_SIZE is not used any more.
The size of struct "global_data" is automatically calculated
by asm-offsets. (See lib/asm-offsets.c)GENERATED_GBL_DATA_SIZE should be used instead of
CONFIG_SYS_GBL_DATA_SIZE.Signed-off-by: Masahiro Yamada
-
Useful rules in scripts/Makefile.lib allows us to easily
generate a device tree blob and wrap it in assembly code.We do not need to parse a linker script to get output format and arch.
This commit deletes ./u-boot.dtb since it is a copy of dts/dt.dtb.
Signed-off-by: Masahiro Yamada
-
- Delete fs.xml from DOCBOOKS to fix an error.
Commit e3ff797c added fs.xml to DOCBOOKS
but missed to add doc/DocBook/fs.tmpl.
- Fix the location of include guard in include/linker_lists.h.Signed-off-by: Masahiro Yamada
Reported-by: Abraham Varricatt
Acked-by: Simon Glass -
Commit bb02c536 stopped creaing a symbolic link include/asm.
Signed-off-by: Masahiro Yamada
19 Feb, 2014
21 commits
-
Add spl_sata to read a fat partition from a bootable SATA
drive.Signed-off-by: Dan Murphy
Reviewed-by: Roger Quadros -
Signed-off-by: Masahiro Yamada
Acked-by: Simon Glass -
This commit removes platform CONFIG_SYS_HZ definition for the
remainders of part1 (commit cdb23792) and part2 (commit f232950f).Signed-off-by: Masahiro Yamada
Cc: Rob Herring -
Commit af5b9b1f removed mini2440 board support,
but missed to delete include/configs/mini2440.h.Signed-off-by: Masahiro Yamada
-
This hooks into the generic "file exists" support added in an earlier
patch, and provides an implementation for the FAT filesystem.Signed-off-by: Stephen Warren
Acked-by: Simon Glass -
This hooks into the generic "file exists" support added in an earlier
patch, and provides an implementation for the ext4 filesystem.Signed-off-by: Stephen Warren
Acked-by: Simon Glass -
Since the generic ls command no longer segfaults sandbox, enable it.
Signed-off-by: Stephen Warren
Acked-by: Simon Glass -
This hooks into the generic "file exists" support added in an earlier
patch, and provides an implementation for the sandbox test environment.Signed-off-by: Stephen Warren
Acked-by: Simon Glass -
This could be used in scripts such as:
if test -e mmc 0:1 /boot/boot.scr; then
load mmc 0:1 ${scriptaddr} /boot/boot.scr
source ${scriptaddr}
firather than:
if load mmc 0:1 ${scriptaddr} /boot/boot.scr; then
source ${scriptaddr}
fiThis prevents errors being printed by attempts to load non-existent
files, which can be important when checking for a large set of files,
such as /boot/boot.scr.uimg, /boot/boot.scr, /boot/extlinux.conf,
/boot.scr.uimg, /boot.scr, /extlinux.conf.Signed-off-by: Stephen Warren
Acked-by: Simon Glass -
Fix a few issues with the generic "save" shell command, and fs_write()
function.1) fstypes[].write wasn't filled in for some file-systems, and isn't
checked when used, which could cause crashes/... if executing save
on e.g. fat/ext filesystems.2) fs_write() requires the length argument to be non-zero, since it needs
to know exactly how many bytes to write. Adjust the comments and code
according to this.3) fs_write() wasn't prototyped in like other generic functions;
other code should be able to call this directly rather than invoking
the "save" shell command.Signed-off-by: Stephen Warren
Acked-by: Simon Glass -
SPL is using ps7_init.c/h files which are generated
from design tools which have to be copied to
boards/xilinx/zynq folder before compilation.BSS section is moved to SDRAM because fat support
requires more space than SRAM size.Added:
- MMC and QSPI support
- Boot OS directly from SPL
- Enable SPL commandSigned-off-by: Michal Simek
Reviewed-by: Tom Rini -
Enable and implement dump clock command which shows
soc frequencies.Signed-off-by: Soren Brinkmann
Signed-off-by: Michal Simek -
Signed-off-by: Soren Brinkmann
Signed-off-by: Michal Simek -
Provide the DIV_ROUND_CLOSEST macro - taken from the Linux kernel - in
common.hSigned-off-by: Soren Brinkmann
Signed-off-by: Michal Simek -
Define both serial uarts in the driver and return
default uart based on board configuration.- Move baseaddresses to hardware.h
- Define default baudrate and clock valuesSigned-off-by: Michal Simek
-
For saving content of memory via tftp to file.
Signed-off-by: Michal Simek
-
Extend max kernel image size. Gunzip is checking
this value. If kernel is larger, message below is shown.Uncompressing Kernel Image ... Error: inflate() returned -5
GUNZIP: uncompress, out-of-mem or overwrite error -
must RESET board to recoverSigned-off-by: Michal Simek
-
Zynq common configuration is placed in zynq-common.h
not zynq_common.h.Signed-off-by: Michal Simek
-
Enables support for SPI SPL, QSPI and Spansion serial flash device
on the EVM. Configures pin muxes for QSPI mode.Signed-off-by: Sourav Poddar
Reviewed-by: Jagannadha Sutradharudu Teki
18 Feb, 2014
1 commit