29 Jul, 2011
4 commits
-
Recieve/Receive
recieve/receive
Interupt/Interrupt
interupt/interrupt
Addres/Address
addres/addressSigned-off-by: Mike Williams
-
If sed does not support the GNU \w regex extension, build attempts
lead to circular dependency warnings and finally build failure
(crc32.c not found). Build output before and after the patch on
FreeBSD is at:
http://lists.denx.de/pipermail/u-boot/2011-June/095235.htmlSigned-off-by: Jeroen Hofstee
-
Parsing of boards.cfg fails on FreeBSD with the error:
sed: 1: "/=/ {s/=/\t/;q } ; { s/ ...": extra characters at the end
of q commandBSD sed expects commands to be on seperate 'lines', hence it expects
an additional ; before the closing brackets.
BSD sed does not support \t, replaced by literal tab.Signed-off-by: Jeroen Hofstee
Cc: Marek Vasut
Acked-by: Mike Frysinger -
Signed-off-by: Jeroen Hofstee
28 Jul, 2011
36 commits
-
This patch removes the architecture specific implementation of
version_string where possible. Some architectures use a special place
and therefore we provide U_BOOT_VERSION_STRING definition and a common
weak symbol version_string.Signed-off-by: Andreas Bießmann
CC: Mike Frysinger
CC: Peter Pan
Acked-by: Mike Frysinger -
Provide appropriate '-O u-boot' while doing mkimage
for u-boot.imgSigned-off-by: Aneesh V
-
creating an u-boot.ubl file, which contains the UBL Header
needed for booting from NAND with the RBL from TI. For more
information read doc/README.ublimage.Signed-off-by: Heiko Schocher
-
- Take maintainership of the unlisted integratorap board
- Orphan the boards maintained by Peter Pearse, as he has retired
from ARMCc: Philippe Robin
Signed-off-by: Linus Walleij -
Doesn't make sense to provide this function to boards which defined
CONFIG_ENV_IS_NOWHERE. Such a board gets a linking error because
common/env_nowhere.c doesn't define saveenv().Signed-off-by: Michael Jones
Acked-by: Mike Frysinger -
Support FPGAs which use Fast Passive Parallel configuration
Signed-off-by: Michael Jones
-
Signed-off-by: Michael Jones
-
In the only implementation of 'mac read', it doesn't display the
contents of the eeprom as the help indicated unless compiled with
DEBUG. It only re-reads the contents of the EEPROM into memory.
Displaying the contents of the EEPROM is done by passing no
arguments to 'mac'.Signed-off-by: Michael Jones
Acked-by: Detlev Zundel -
Signed-off-by: Michael Jones
Acked-by: Detlev Zundel -
Signed-off-by: Michael Jones
Acked-by: Detlev Zundel -
Signed-off-by: Michael Jones
Acked-by: Detlev Zundel -
Tell 'find' to follow symbolic links, so that files under include/asm
and arch/$(ARCH)/include/asm/arch are added to the indexing file list.Signed-off-by: Horst Kronstorfer
Acked-by: Detlev Zundel -
Enable printout of i2c deblocking status if chips were in block
state or deblocking failed.Signed-off-by: Stefan Bigler
cc: Valentin Longchamp
cc: Heiko Schocher
cc: Wolfgang Denk -
Moved eeprom config to specific part, to allow bigger eeprom write pages
for km_kirkwood designs. Write page only used for env eeprom in std use
cases. 24C128 has page size of 64bytes -> 8 time faster.Signed-off-by: Stefan Bigler
cc: Valentin Longchamp
cc: Heiko Schocher
cc: Wolfgang Denk -
Now we use the standard u-boot make to build the Kirkwood binary.
The output file is u-boot.kwb. So use this name for the tftp
update function to avoid confusion, because this is the binary we
need on Kirkwood.Signed-off-by: Holger Brunck
cc: Valentin Longchamp
cc: Heiko Schocher
cc: Wolfgang Denk -
Be verbose if do_setboardid was called and print
correct names of variables in do_checkboardidhwk.Signed-off-by: Holger Brunck
cc: Valentin Longchamp
cc: Heiko Schocher
cc: Wolfgang Denk -
Previously reading or writing zero full sectors (reading the end of
one sector and the beginning of the next for example) was special
cased and involved stack allocating a second sector buffer. This
change uses the same code path for this case as well as when there
are a non-zero number of full sectors to access. The result is
easier to read and reduces the maximum stack used.Signed-off-by: Anton Staaf
Cc: Andy Fleming
Acked-by: Detlev Zundel -
Fix all checkpatch violations in the low level Ext2 block
device reading code. This is done in preparation for cleaning
up the partial sector access code.Signed-off-by: Anton Staaf
Cc: Andy Fleming
Acked-by: Detlev Zundel -
see discussion also here:
http://patchwork.ozlabs.org/patch/75309/Signed-off-by: Heiko Schocher
cc: Wolfgang Denk
cc: Holger Brunck -
All the km boards uses CRAMFS images where the kernel is stored.
This isn't architecture specific because we use it on ARM and
POWERPC.Signed-off-by: Holger Brunck
Signed-off-by: Valentin Longchamp
cc: Heiko Schocher
cc: Wolfgang Denk -
Common code should be valid for more than one architecture,
therefore the km82xx specific code was removed from common.c.Signed-off-by: Holger Brunck
Signed-off-by: Valentin Longchamp
cc: Heiko Schocher
cc: Wolfgang Denk -
This code is unused and therefore dead code.
Signed-off-by: Holger Brunck
Signed-off-by: Valentin Longchamp
cc: Heiko Schocher
cc: Wolfgang Denk -
The file common.c grows in the past. So move the IVM specific
code into an ivm.c file.Signed-off-by: Holger Brunck
Signed-off-by: Valentin Longchamp
cc: Heiko Schocher
cc: Wolfgang Denk -
This is unneeded here because we save the environment when
the board boots the first time. At this time we have set
the values already.Signed-off-by: Holger Brunck
Signed-off-by: Valentin Longchamp
cc: Heiko Schocher
cc: Wolfgang Denk -
The ethaddr is stored inside the inventory eeprom. During
boottime this value was read out and the ethaddr variable was
set. Previously this was only done if it ethaddr == NULL but
this is wrong for our ARM boards. Because ethaddr is at this
stage never NULL for ARM due to the random calculation of a
MAC address in mvgbe.c.Signed-off-by: Holger Brunck
Signed-off-by: Valentin Longchamp
cc: Heiko Schocher
cc: Wolfgang Denk -
These defines and the header keymile_hdlc_enet.h are obsolete
due to the removed hdlc code.Signed-off-by: Holger Brunck
Signed-off-by: Valentin Longchamp
cc: Heiko Schocher
cc: Wolfgang Denk -
The debug environment which is stored in textfiles in the
scripts directory was reworked. Two usecase are now present
which can be executed simply from the default environment:
run develop: this configures the environment to setup the
rootfs via nfs
run ramfs: this configures the environment to setup the
rootfs in ramEach architecture now has a "arch" variable which is used
to load the architecture specific debug scripts and to set
the rootpath for NFS.Signed-off-by: Holger Brunck
Signed-off-by: Valentin Longchamp
cc: Heiko Schocher
cc: Wolfgang Denk -
The test SW is started when the test_bank variable is set.
Signed-off-by: Thomas Herzmann
Signed-off-by: Valentin Longchamp
cc: Heiko Schocher
cc: Wolfgang Denk
Signed-off-by: Holger Brunck -
This is the second step to simplify and decrease the default
environment for the keymile boards. The release usecase formaly
used to set the production environment was removed and the default
configuration is now the production environment. So the formar
environment variable "release" which has done a lot of things
in the past, simply erase the current environment and do a reset
which forces u-boot to setup the default environment again.Signed-off-by: Holger Brunck
Signed-off-by: Valentin Longchamp
cc: Heiko Schocher
cc: Wolfgang Denk -
Apple iPod nanos have sector sizes of 2 or 4 KiB, which crashes U-Boot when it
tries to read the MBR into 512-byte buffer situated on stack. Instead use the
variable length arrays to be safe with any large sector size.Signed-off-by: Sergei Shtylyov
-
change bd->bi_memsize to gd->ram_size, as this is defined
on all archs, so this post test can used on none powerpc
archs too.Signed-off-by: Heiko Schocher
cc: Wolfgang Denk
cc: Mike Frysinger -
Signed-off-by: Heiko Schocher
-
Signed-off-by: Phil Edworthy
Cc: Ben Warren -
Signed-off-by: Anatolij Gustschin
-
Up to now only reading 'appreg' value was implemented in the
digsyMTC special 'mtc appreg' command. Extend the command to
support writing appreg value, too.Signed-off-by: Werner Pfister
Signed-off-by: Anatolij Gustschin
Acked-by: Detlev Zundel -
Add detection and initialisation for graphic extension board
and support splash screen when booting. Enable "bmp" command
in the board configuration and provide "disp" command to
be able to switch the display on/off.Signed-off-by: Anatolij Gustschin
Acked-by: Detlev Zundel
