29 Nov, 2006
3 commits
-
In the bootvx command the load address was only read from the env
variable "loadaddr" and not optionally passed as paramter as described
in the help. This is fixed with this patch. The behaviour is now the
same as in the bootelf command.Signed-off-by: Stefan Roese
-
Fixed include/ppc440.c for UIC address Bug
Corrects bug affecting the addresses for the universal interrupt
controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.Signed-off-by: Jeff Mann
Signed-off-by: Stefan Roese -
This patch adds the code and configuration necessary to boot with an
arch/powerpc Linux kernel.Signed-off-by: Grant Likely
Acked-by: Jon Loeliger
28 Nov, 2006
12 commits
-
Signed-off-by: Stefan Roese
-
Signed-off-by: Stefan Roese
-
Patch below corrects the setting of the zmiifer register, it was
overwritting the register rather than ORing the settings.Signed-off-by: Neil Wilson
Signed-off-by: Stefan Roese -
The current NAND Bootloader setup forces the environment
variables to be in line with the bootloader. This change
enables the configuration to be made in the board include
file instead so that it can be individually enabled.Signed-off-by: Nick Spence
Signed-off-by: Stefan Roese -
Two fixes for the nand_wait() function in
drivers/nand/nand_base.c:1. Use correct timeouts. The original timeouts in Linux
source are 400ms and 20ms not 40s and 20s2. Return correct error value in case of timeout. 0 is
interpreted as OK.Signed-off-by: Rui Sousa
Signed-off-by: Stefan Roese -
This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
arguments to bootm. It removes the getenv("disable_of") test that used
to be used for this purpose.Signed-off-by: Grant Likely
Acked-by: Jon Loeliger
27 Nov, 2006
8 commits
-
Signed-off-by: Stefan Roese
-
Signed-off-by: Stefan Roese
-
Signed-off-by: Stefan Roese
-
Signed-off-by: Stefan Roese
-
Signed-off-by: Stefan Roese
24 Nov, 2006
1 commit
-
- fix off-by-one error in board/tqm5200/cam5200_flash.c error message
- simplify "udate" definitions
22 Nov, 2006
1 commit
-
Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
errata 1.12: 440_33 by moving patch up in code.Signed-off-by: Jeff Mann
Signed-off-by: Stefan Roese
21 Nov, 2006
1 commit
-
Signed-off-by: Stefan Roese
20 Nov, 2006
2 commits
13 Nov, 2006
3 commits
-
* Adds support for AMD command set Top Boot flash geometry reversal
* Adds support for reading JEDEC Manufacturer ID and Device ID
* Adds support for displaying command set, manufacturer id and
device ids (flinfo)
* Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
* Removes outdated change history (refer to git log instead)Signed-off-by: Tolunay Orkun
Signed-off-by: Stefan Roese
12 Nov, 2006
2 commits
-
group is enabled for USB earlier (in cpu_init_f() instead of
usb_lowlevel_init()).
10 Nov, 2006
1 commit
07 Nov, 2006
1 commit
-
at least on G2 cores.
This fixes get_ram_size() problems on MPC5200 Rev. B boards.
03 Nov, 2006
1 commit
02 Nov, 2006
1 commit
01 Nov, 2006
3 commits
-
- add watchdog support
- enable GPIO_WKUP_7 pin for input
- code cleanup -
* remove warnings when compiling ethaddr.c
* adjust linker script (fixes a crash resulting from incorrect
definition of __u_boot_cmd_start)
- Some MarelV38B code cleanup. -
MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
MPC5XXX_WU_GPIO_DATA_O for affected boards.- Add defintions for some MPC5XXX GPIO pins.