Eric Lee / smarc-uboot

25 Feb, 2015

3 commits

  • 419fa9ae2   edminiv2: drop CONFIG_CFI_LEGACY ... Browse Code »

    Nowadays generic CFI code properly detects the ED Mini V2's
    Macronix MC29LV400CB flash chip, therefore we can drop the
    CONFIG_FLASH_CFI_LEGACY option and associated settings and code.

    Signed-off-by: Albert ARIBAUD

    Albert ARIBAUD
     
  • 9608e7de6   edminiv2: switch to SPL ... Browse Code »

    ED Mini V2 is based on Orion 5x which boots at fixed
    address 0xFFFF0000 in NOR Flash. Place SPL there, and
    switch U-Boot from .bin to .img format, stored in
    NOR Flash at 0xFFF90000.

    Note: this patch was tested on HW and works, i.e.
    it boots U-Boot properly, but SPL console output
    currently does not appear, due to GD being trashed
    by arch/arm/lib/spl.c. This trashing is soon to be
    removed, and then ED Mini V2 SPL console output will
    become visible.

    Signed-off-by: Albert ARIBAUD

    Albert ARIBAUD
     
  • e91617883   edminiv2: switch to generic board support ... Browse Code »

    Signed-off-by: Albert ARIBAUD

    Albert ARIBAUD
     

27 Oct, 2014

1 commit

23 Oct, 2014

3 commits

25 Sep, 2014

1 commit

  • 535aad29f   MAINTAINERS: comment out blank M: field ... Browse Code »

    Since commit ddaf5c8f3030050fcd356a1e49e3ee8f8f52c6d4
    (patman: RunPipe() should not pipe stdout/stderr unless asked),
    Patman spits lots of "Invalid MAINTAINERS address: '-'"
    error messages for patches with global changes.
    It takes too long for Patman to process them.

    Anyway, "M: -" does not carry any important information.
    Rather, it is just like a place holder in case of assigning
    a new board maintainer. Let's comment out.

    This commit can be reproduced by the following command:

    find . -name MAINTAINERS | xargs sed -i -e '/^M:[[:blank:]]*-$/s/^/#/'

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

14 Sep, 2014

1 commit

  • 461be2f96   kconfig: remove redundant "string" type in arch and board Kconfigs ... Browse Code »
    44

    Now the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME}
    are specified in arch/Kconfig.

    We can delete the ones in arch and board Kconfig files.

    This commit can be easily reproduced by the following command:

    find . -name Kconfig -a ! -path ./arch/Kconfig | xargs sed -i -e '
    /config[[:space:]]SYS_\(ARCH\|CPU\|SOC\|\VENDOR\|BOARD\|CONFIG_NAME\)/ {
    N
    s/\n[[:space:]]*string//
    }
    '

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

31 Aug, 2014

2 commits

30 Jul, 2014

2 commits

  • 93d4334f7   Add board MAINTAINERS files ... Browse Code »

    We have switched to Kconfig and the boards.cfg file is going to
    be removed. We have to retrieve the board status and maintainers
    information from it.

    The MAINTAINERS format as in Linux Kernel would be nice
    because we can crib the scripts/get_maintainer.pl script.

    After some discussion, we chose to put a MAINTAINERS file under each
    board directory, not the top-level one because we want to collect
    relevant information for a board into a single place.

    TODO:
    Modify get_maintainer.pl to scan multiple MAINTAINERS files.

    Signed-off-by: Masahiro Yamada
    Suggested-by: Tom Rini
    Acked-by: Simon Glass

    Masahiro Yamada
     
  • dd84058d2   kconfig: add board Kconfig and defconfig files ... Browse Code »

    This commit adds:
    - arch/${ARCH}/Kconfig
    provide a menu to select target boards
    - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
    set CONFIG macros to the appropriate values for each board
    - configs/${TARGET_BOARD}_defconfig
    default setting of each board

    (This commit was automatically generated by a conversion script
    based on boards.cfg)

    In Linux Kernel, defconfig files are located under
    arch/${ARCH}/configs/ directory.
    It works in Linux Kernel since ARCH is always given from the
    command line for cross compile.

    But in U-Boot, ARCH is not given from the command line.
    Which means we cannot know ARCH until the board configuration is done.
    That is why all the "*_defconfig" files should be gathered into a
    single directory ./configs/.

    Signed-off-by: Masahiro Yamada
    Acked-by: Simon Glass

    Masahiro Yamada
     

18 Nov, 2013

1 commit

01 Nov, 2013

1 commit

24 Jul, 2013

1 commit

20 Jun, 2013

3 commits

  • 7737c9946   net2big_v2: initialize LEDs at startup ... Browse Code »

    This patch allows to configure the net2big_v2 LEDs at startup (through
    the GPIO extension bus). The front blue LED is enabled and the SATA rear
    LEDs are configured to blink in relation with the SATA activity.

    Signed-off-by: Simon Guinot

    Simon Guinot
     
  • d5cc3f524   LaCie/common: add support for the CPLD GPIO bus ... Browse Code »

    This patch adds support for the CPLD GPIO bus found on some LaCie boards
    (as the 2Big/5Big Network v2 and the 2Big NAS). This parallel GPIO bus
    exposes two registers (address and data). Each of this register is made
    up of several dedicated GPIOs. An extra GPIO is used to notify the CPLD
    that the registers have been updated.

    Mostly this bus is used to configure the LEDs on LaCie boards.

    Signed-off-by: Simon Guinot

    Simon Guinot
     
  • 2af4d0f49   net2big_v2: initialize I2C fan at startup ... Browse Code »

    This patch ensures minimal cooling for the net2big_v2 by automatically
    starting the I2C fan (GMT G762) at low speed (2800 RPM).

    Signed-off-by: Simon Guinot
    Acked-by: Prafulla Wadaskar

    Simon Guinot
     

10 May, 2013

1 commit

  • b1e6c4c3d   Fix references to the documentation files ... Browse Code »

    Many boot image configuration files refer to the
    appropriate documentation file, but these references
    contain typos in the directory and file name. Fix
    them. Also fix reference to doc/README.SPL file.

    Signed-off-by: Anatolij Gustschin
    Cc: Prafulla Wadaskar
    Cc: Stefano Babic
    Acked-by: Stefano Babic

    Anatolij Gustschin
     

09 Jan, 2013

2 commits

03 Oct, 2012

1 commit

  • 372354969   ARM: add support for Network Space v2 Lite and Mini ... Browse Code »

    This patch adds support for the LaCie boards Network Space v2 (Lite and
    Mini). This two boards are derived from the Network Space v2 and a lot
    of hardware caracteristics are shared.

    - CPU: Marvell 88F6192 800Mhz
    - SDRAM memory: 128MB DDR2 200Mhz
    - 1 SATA port: internal
    - Gigabit ethernet: PHY Marvell 88E1318
    - Flash memory: SPI NOR 512KB (Macronix MX25L4005A)
    - i2c EEPROM: 512 bytes (24C04 type)
    - 2 USB2 ports (Lite only): host and host/device
    - 1 push button
    - 1 SATA LED (bi-color, blue and red)

    Signed-off-by: Simon Guinot

    Simon Guinot
     

07 Jul, 2012

2 commits

  • c59c08573   ARM: don't probe PHY address for LaCie boards ... Browse Code »

    The command miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr) always
    returns 8 for the PHY address. It is the reset value for the PHY
    Address Register. Obviously, this default value could be incorrect.
    Moreover, as the PHY address is well known, there is no need to
    auto-detect it.

    Now, the PHY address must given as a parameter to the PHY initialization
    function. Additionally this patch also fixes some aesthetic issues.

    Signed-off-by: Simon Guinot

    Simon Guinot
     
  • 846836386   kirkwood: fix calls to kirkwood_mpp_conf ... Browse Code »

    With the new second save argument introduced by the previous patch, all
    the calls to the function had to be fixed.

    Signed-off-by: Valentin Longchamp
    cc: Holger Brunck
    cc: Prafulla Wadaskar

    Valentin Longchamp
     

11 Dec, 2011

1 commit

07 Dec, 2011

3 commits

04 Nov, 2011

2 commits

  • f697997a4   netspace_v2: fix SDRAM configuration ... Browse Code »

    Network Space (Max) v2 and Internet Space v2 boards have different
    SDRAM configuration and size: respectively 256MB (DDR2 1Gb, 128Mbx8
    organisation) and 128MB (DDR2 512Mb, 64Mbx8 organisation). To handle
    the differences, this patch add a dedicated kwimage.cfg file for
    Internet Space v2.

    Additionnaly the number of SDRAM banks is fixed.

    Signed-off-by: Simon Guinot

    Simon Guinot
     
  • fc168cc56   ARM: netspace_v2: fix warnings ... Browse Code »

    Fix compiler warnings when compiling for netspace_v2, netspace_max_v2
    and inetspace_v2:

    netspace_v2.c: In function 'board_early_init_f':
    netspace_v2.c:37: warning: implicit declaration of function 'kw_config_gpio'
    netspace_v2.c: In function 'board_init':
    netspace_v2.c:86: warning: implicit declaration of function 'kw_sdram_bar'

    Signed-off-by: Anatolij Gustschin
    Cc: Simon Guinot
    Cc: Albert ARIBAUD
    Acked-by: Marek Vasut

    Anatolij Gustschin
     

16 Oct, 2011

1 commit

  • 464c79207   punt unused clean/distclean targets ... Browse Code »

    The top level Makefile does not do any recursion into subdirs when
    cleaning, so these clean/distclean targets in random arch/board dirs
    never get used. Punt them all.

    MAKEALL didn't report any errors related to this that I could see.

    Signed-off-by: Mike Frysinger

    Mike Frysinger
     

04 Jul, 2011

1 commit

  • 79642098a   Add support for Network Space v2 and parents ... Browse Code »

    This patch add support for the Network Space v2 board and parents, based
    on the Marvell Kirkwood 6281 SoC. This include Network Space (Max) v2
    and Internet Space v2.

    Additional information is available at:
    http://lacie-nas.org/doku.php?id=network_space_v2

    Signed-off-by: Simon Guinot

    Simon Guinot
     

28 Apr, 2011

1 commit

18 Nov, 2010

1 commit

  • 6d8962e81   Switch from archive libraries to partial linking ... Browse Code »

    Before this commit, weak symbols were not overridden by non-weak symbols
    found in archive libraries when linking with recent versions of
    binutils. As stated in the System V ABI, "the link editor does not
    extract archive members to resolve undefined weak symbols".

    This commit changes all Makefiles to use partial linking (ld -r) instead
    of creating library archives, which forces all symbols to participate in
    linking, allowing non-weak symbols to override weak symbols as intended.
    This approach is also used by Linux, from which the gmake function
    cmd_link_o_target (defined in config.mk and used in all Makefiles) is
    inspired.

    The name of each former library archive is preserved except for
    extensions which change from ".a" to ".o". This commit updates
    references accordingly where needed, in particular in some linker
    scripts.

    This commit reveals board configurations that exclude some features but
    include source files that depend these disabled features in the build,
    resulting in undefined symbols. Known such cases include:
    - disabling CMD_NET but not CMD_NFS;
    - enabling CONFIG_OF_LIBFDT but not CONFIG_QE.

    Signed-off-by: Sebastien Carlier

    Sebastien Carlier
     

20 Oct, 2010

1 commit

  • 6d8d4ef99   Merge branch 'elf_reloc' ... Browse Code »

    Conflicts:
    arch/arm/include/asm/config.h
    board/LaCie/edminiv2/config.mk
    board/karo/tx25/config.mk
    board/logicpd/imx27lite/config.mk
    doc/README.arm-relocation

    Signed-off-by: Wolfgang Denk

    Wolfgang Denk
     

19 Oct, 2010

1 commit

  • 14d0a02a1   Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE ... Browse Code »

    The change is currently needed to be able to remove the board
    configuration scripting from the top level Makefile and replace it by
    a simple, table driven script.

    Moving this configuration setting into the "CONFIG_*" name space is
    also desirable because it is needed if we ever should move forward to
    a Kconfig driven configuration system.

    Signed-off-by: Wolfgang Denk

    Wolfgang Denk
     

13 Oct, 2010

1 commit

13 Jul, 2010

1 commit

17 Jun, 2010

1 commit