Eric Lee / smarc-uboot

04 Sep, 2018

1 commit

18 Aug, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

28 Apr, 2018

1 commit

  • f1b1f7706   Convert CONFIG_SPI to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_SPI

    This partly involves updating code that assumes that CONFIG_SPI implies
    things that are specific to the MPC8xx SPI driver. For now, just update
    the CONFIG tests. This also involves reworking the default for
    CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a
    reasonable default, as it does not cause any compile failures.

    Signed-off-by: Adam Ford
    Signed-off-by: Tom Rini

    Adam Ford
     

17 Apr, 2018

1 commit

09 Apr, 2018

2 commits

24 Feb, 2018

1 commit

  • d021e9421   Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_BOOTP_BOOTPATH
    CONFIG_BOOTP_DNS
    CONFIG_BOOTP_GATEWAY
    CONFIG_BOOTP_HOSTNAME
    CONFIG_BOOTP_PXE
    CONFIG_BOOTP_SUBNETMASK
    CONFIG_CMDLINE_EDITING
    CONFIG_AUTO_COMPLETE
    CONFIG_SYS_LONGHELP
    CONFIG_SUPPORT_RAW_INITRD
    CONFIG_ENV_VARS_UBOOT_CONFIG

    Signed-off-by: Adam Ford
    [trini: Re-run the migration]
    Signed-off-by: Tom Rini

    Adam Ford
     

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

24 Aug, 2017

1 commit

15 Aug, 2017

2 commits

12 Aug, 2017

1 commit

01 Aug, 2017

10 commits

  • 24357dfd2   x86: Switch all boards to use DM SCSI ... Browse Code »

    After MMC is converted to DM, convert to use DM SCSI as well for all
    x86 boards and imply BLK for both MMC and SCSI drivers.

    CONFIG_SCSI_DEV_LIST is no longer used. Clean them up.

    Signed-off-by: Bin Meng
    Reviewed-by: Simon Glass

    Bin Meng
     
  • 1df7f0b6a   x86: kconfig: Let board select SPI flash ... Browse Code »

    Only a specific type of SPI flash exists on a board, having board
    Kconfig to select the SPI flash seems to make more sense. Other
    flash types are not necessary except coreboot, which implies all
    available flash drivers there.

    Signed-off-by: Bin Meng
    Reviewed-by: Simon Glass

    Bin Meng
     
  • a5b212942   x86: ivybridge: kconfig: Imply platform specific drivers ... Browse Code »

    Imply drivers that are working with Ivybridge platform in the
    platform Kconfig.

    Signed-off-by: Bin Meng
    Reviewed-by: Simon Glass

    Bin Meng
     
  • 4f0faacb4   x86: kconfig: Imply DM uclass drivers ... Browse Code »

    Now that all x86 boards have been converted to use DM, we can imply
    these uclass drivers (DM_ETH, DM_RTC, DM_USB, DM_VIDEO) from the
    top level.

    Previously DM_GPIO, DM_KEYBOARD, DM_SERIAL, DM_SPI, DM_SPI_FLASH
    are selected. Change to use 'imply' to allow them to be removed.

    Note with this change, chromebook_link64 build fails:

    common/built-in.o:(.data.env_htab+0xc): undefined reference to 'env_flags_validate'
    lib/built-in.o: In function `hsearch_r':
    lib/hashtable.c:380: undefined reference to 'env_callback_init'
    lib/hashtable.c:382: undefined reference to 'env_flags_init'
    make[1]: *** [spl/u-boot-spl] Error 1

    CONFIG_SPL_ENV_SUPPORT is required for chromebook_link64 to build
    again. This is just a workaround as it is not needed at all. See
    commit bda40d5 "x86: qemu: Add a config for 64-bit U-Boot" for
    the same issue seen on QEMU 64-bit target.

    Signed-off-by: Bin Meng
    Reviewed-by: Andy Shevchenko
    Reviewed-by: Simon Glass

    Bin Meng
     
  • 263252c76   x86: kconfig: Select OF_CONTROL ... Browse Code »

    This is a must have for all x86 boards.

    Signed-off-by: Bin Meng
    Reviewed-by: Andy Shevchenko
    Reviewed-by: Simon Glass

    Bin Meng
     
  • 67f99f970   x86: kconfig: Imply ENABLE_MRC_CACHE in the platform Kconfig ... Browse Code »

    Platform knows whether MRC cache is implemented, but using it can
    be a choice of a specific board.

    Signed-off-by: Bin Meng
    Reviewed-by: Simon Glass

    Bin Meng
     
  • 6bf89de7e   x86: kconfig: Select PCI and DM_PCI ... Browse Code »

    PCI is the de facto interconnect bus in an x86 system.

    Signed-off-by: Bin Meng
    Reviewed-by: Andy Shevchenko
    Reviewed-by: Simon Glass

    Bin Meng
     
  • e28497bf4   x86: kconfig: Select USE_PRIVATE_LIBGCC ... Browse Code »

    x86 is using the built-in libgcc implementation and this cannot be
    turned off.

    Signed-off-by: Bin Meng
    Reviewed-by: Andy Shevchenko
    Reviewed-by: Simon Glass

    Bin Meng
     
  • 0ce9c5762   x86: kconfig: Select TIMER and X86_TSC_TIMER ... Browse Code »

    Without a timer, U-Boot just doesn't boot. This is not something
    we can turn off.

    Signed-off-by: Bin Meng
    Reviewed-by: Andy Shevchenko
    Reviewed-by: Simon Glass

    Bin Meng
     
  • eddc7dabe   configs: Resync with savedefconfig ... Browse Code »

    Rsync all defconfig files using moveconfig.py

    Signed-off-by: Tom Rini

    Tom Rini
     

30 Jul, 2017

1 commit

  • 611dbb7f9   arch/x86: Select USB before selecting host driver ... Browse Code »

    Kbuild complains if USB is not selected before any of host driver.

    warning: (X86) selects USB_EHCI_HCD which has unmet direct dependencies (USB)
    warning: (X86) selects USB_EHCI_HCD which has unmet direct dependencies (USB)

    Select it for X86.

    Fixes: 64d6ac5bc4a9 ("Kconfig: USB: Migrate CONFIG_USB_EHCI_HCD users to Kconfig")
    Signed-off-by: Andy Shevchenko
    [bmeng: Update all x86 boards' defconfig files to remove CONFIG_USB]
    Signed-off-by: Bin Meng

    Andy Shevchenko
     

26 Jul, 2017

1 commit

12 Jul, 2017

2 commits

28 Jan, 2017

4 commits

30 Dec, 2016

1 commit

29 Oct, 2016

1 commit

28 Oct, 2016

1 commit

24 Oct, 2016

5 commits