21 Jan, 2019
1 commit
-
This commit converts the following items to Kconfig:
CONFIG_ATMEL_NAND_HWECC
CONFIG_ATMEL_NAND_HW_PMECC
CONFIG_PMECC_CAP
CONFIG_PMECC_SECTOR_SIZE
CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER[PMECC References]
https://www.at91.com/linux4sam/bin/view/Linux4SAM/PmeccConfigure
https://www.at91.com/linux4sam/bin/view/Linux4SAM/AT91Bootstrap[Mailing List Thread]
https://lists.denx.de/pipermail/u-boot/2018-December/350666.htmlFixes: 5541543f ("configs: at91: Remove CONFIG_SYS_EXTRA_OPTIONS assignment")
[trini: Make the migration be size neutral and possibly not fix the
above in all cases]
Reported-by: Daniel Evans
Cc: Eugen Hristev
Signed-off-by: Derald D. Woods
Signed-off-by: Tom Rini
14 Nov, 2018
1 commit
-
Now that CMD_UBI does not select CMD_MTDPARTS we need to make platforms
that had been enabling it turn it on by hand. This exposed that we had
not yet migrated CMD_MTDPARTS fully, so do so now.Fixes: 86dfa556d927 ("cmd: ubi: Remove useless call to mtdparts_init()")
Signed-off-by: Tom Rini
22 Oct, 2018
1 commit
-
Enable iminfo command with CONFIG_CMD_IMI
Signed-off-by: Eugen Hristev
29 Sep, 2018
2 commits
-
Add commands for fdt overlay merging. This is required for the boot scripts
that detect PDAs and apply specific overlays to the DTB passed on to kernel.Signed-off-by: Eugen Hristev
-
SAMA5D3 SoC can have extra clip boards (PDAs) connected, which have
an EEPROM memory for identification. A special GPIO can be used to read
this memory over 1wire protocol.
Enabling one wire and eeprom drivers for this memory.Signed-off-by: Eugen Hristev
04 Sep, 2018
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
17 Aug, 2018
1 commit
-
We have the following cases:
- CONFIG_NR_DRAM_BANKS was defined, migrate normally
- CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
- CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
2), set this to 8.Signed-off-by: Tom Rini
22 Jul, 2018
2 commits
-
Some boards indicate support from booting NAND or
ONENAND booting, but don't enable the CONFIG_NAND. This
makes those boards imply NAND which will make
enabling other flags that are dependent on CONFIG_NAND
possible and easier to migrate.Signed-off-by: Adam Ford
-
This converts the following to Kconfig:
CONFIG_NAND_ATMELSigned-off-by: Adam Ford
04 Jun, 2018
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
08 May, 2018
1 commit
-
We have a new demo layout of our sama5 boards for the NAND Flash
memory.
According to this new layout, adjust the mtdparts variable in bootargs
to align with this, which is available at :
http://www.at91.com/linux4sam/bin/view/Linux4SAM/Sama5d3XplainedMainPage#NAND_Flash_demo_Memory_map,Based on original work by Wenyou Yang
Signed-off-by: Eugen Hristev
17 Apr, 2018
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
08 Apr, 2018
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
24 Feb, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_BOOTP_BOOTPATH
CONFIG_BOOTP_DNS
CONFIG_BOOTP_GATEWAY
CONFIG_BOOTP_HOSTNAME
CONFIG_BOOTP_PXE
CONFIG_BOOTP_SUBNETMASK
CONFIG_CMDLINE_EDITING
CONFIG_AUTO_COMPLETE
CONFIG_SYS_LONGHELP
CONFIG_SUPPORT_RAW_INITRD
CONFIG_ENV_VARS_UBOOT_CONFIGSigned-off-by: Adam Ford
[trini: Re-run the migration]
Signed-off-by: Tom Rini
11 Feb, 2018
1 commit
-
On the NIOS2 and Xtensa architectures, we do not have
CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
values into the defconfig and removing them from the headers.I did not attempt to add more default values in and for now will leave
that to maintainers.Signed-off-by: Tom Rini
06 Feb, 2018
1 commit
-
cmd/Makefile has:
ifdef CONFIG_FPGA
obj-$(CONFIG_CMD_FPGA) += fpga.o
endifwhich means that if CONFIG_FPGA is not set, CONFIG_CMD_FPGA silently
does nothing. Let's remove that Makefile conditional and instead express
this equivalent dependency in Kconfig, so a lot of redundant# CONFIG_CMD_FPGA is not set
can be removed from board defconfigs that don't actually have an FPGA.
Signed-off-by: Tuomas Tynkkynen
11 Oct, 2017
1 commit
-
Having this as a 'default y' is rather annoying because it doesn't
actually compile unless other options are defined in the board header:../cmd/bootm.c: In function 'do_imls_nor':
../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {Make it 'default n' so people who develop new boards that start from a
blank defconfig have one less compilation failure to debug.Signed-off-by: Tuomas Tynkkynen
15 Sep, 2017
1 commit
-
To remove the assignment of CONFIG_SYS_EXTRA_OPTIONS option,
which is deprecated, use the CONFIG_XXXX_BOOT options to
indicate the boot media, and the SoC is selected by the board.Signed-off-by: Wenyou Yang
28 Aug, 2017
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
27 Aug, 2017
1 commit
-
Use the Atmel PIT timer driver which supports the driver model
and device tree.Signed-off-by: Wenyou Yang
15 Aug, 2017
2 commits
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
-
Also introduce CONFIG_USE_BOOTARGS option so we can control if
CONFIG_BOOTARGS defined at all.Signed-off-by: Sam Protsenko
[trini: Resync r8a779[56]_ulcb, various ls10xx targets]
Signed-off-by: Tom Rini
01 Aug, 2017
1 commit
-
Migrate all remaining instances of CMD_NAND, CMD_NAND_TRIMFFS
CMD_NAND_LOCK_UNLOCK and CMD_NAND_TORTURE from the headers into the
defconfig files.Tested-by: Adam Ford
Signed-off-by: Tom Rini
Reviewed-by: Bin Meng
26 Jul, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_ENV_IS_IN_MMC
CONFIG_ENV_IS_IN_NAND
CONFIG_ENV_IS_IN_UBI
CONFIG_ENV_IS_NOWHEREIn fact this already exists for sunxi as a 'choice' config. However not
all the choices are available in Kconfig yet so we cannot use that. It
would lead to more than one option being set.In addition, one purpose of this series is to allow the environment to be
stored in more than one place. So the existing choice is converted to a
normal config allowing each option to be set independently.There are not many opportunities for Kconfig updates to reduce the size of
this patch. This was tested with./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC
And then manual updates. This is because for CHAIN_OF_TRUST boards they
can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
now.Signed-off-by: Simon Glass
Signed-off-by: Tom Rini
19 Jun, 2017
1 commit
-
Signed-off-by: Tom Rini
04 Jun, 2017
1 commit
-
Now that these symbols are in Kconfig, migrate all users. Use imply on
a number of platforms that default to having this enabled. As part of
this we must migrate some straglers for CMD_FAT and DOS_PARTITION.Signed-off-by: Tom Rini
01 May, 2017
1 commit
-
Signed-off-by: Tom Rini
15 Apr, 2017
2 commits
-
Enable the early debug UART to debug problems when an ICE or other
debug mechanism is not available.Signed-off-by: Wenyou Yang
-
Update the configuration files to support the device tree and driver
model, so do SPL. The device clock and pins configuration are handled
by the clock and the pinctrl drivers respectively.Signed-off-by: Wenyou Yang
Fix build error with sama5d3_xplained_mmc:
Signed-off-by: Simon Glass
14 Mar, 2017
1 commit
-
Signed-off-by: Tom Rini
12 Oct, 2016
1 commit
-
Create a Kconfig entry for DISPLAY_BOARDINFO and make it be the default
in certain architectures. Migrate all config files.Signed-off-by: Lokesh Vutla
Signed-off-by: Tom Rini
27 Sep, 2016
1 commit
-
move the UBI config options into Kconfig.
Signed-off-by: Heiko Schocher
Reviewed-by: Simon Glass
Reviewed-by: Andrew F. Davis
Reviewed by: Evgeni Dobrev
17 Sep, 2016
6 commits
-
Move this option to Kconfig and tidy up existing uses.
Signed-off-by: Simon Glass
-
Move this option to Kconfig and tidy up existing uses.
Signed-off-by: Simon Glass
-
Move this option to Kconfig and tidy up existing uses.
Signed-off-by: Simon Glass
-
Move this option to Kconfig and tidy up existing uses.
Signed-off-by: Simon Glass
-
Move this option to Kconfig and tidy up existing uses.
Signed-off-by: Simon Glass
-
Move the SPL settings into common/spl where most of the SPL code is kept.
Signed-off-by: Simon Glass
10 Sep, 2016
1 commit
-
In some cases we were missing CONFIG_USB=y so enable that when needed.
Reviewed-by: Masahiro Yamada
Signed-off-by: Tom Rini
10 Jun, 2016
1 commit
-
move CONFIG_BOOTDELAY into a Kconfig option. Used for this
purpose the moveconfig.py tool in tools.Signed-off-by: Heiko Schocher
Reviewed-by: Tom Rini
Acked-by: Viresh Kumar
Acked-by: Igor Grinberg