31 Aug, 2014
1 commit
-
Move Highbank-specific settings to highbank/Kconfig.
Signed-off-by: Masahiro Yamada
Cc: Rob Herring
30 Jul, 2014
2 commits
-
We have switched to Kconfig and the boards.cfg file is going to
be removed. We have to retrieve the board status and maintainers
information from it.The MAINTAINERS format as in Linux Kernel would be nice
because we can crib the scripts/get_maintainer.pl script.After some discussion, we chose to put a MAINTAINERS file under each
board directory, not the top-level one because we want to collect
relevant information for a board into a single place.TODO:
Modify get_maintainer.pl to scan multiple MAINTAINERS files.Signed-off-by: Masahiro Yamada
Suggested-by: Tom Rini
Acked-by: Simon Glass -
This commit adds:
- arch/${ARCH}/Kconfig
provide a menu to select target boards
- board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
set CONFIG macros to the appropriate values for each board
- configs/${TARGET_BOARD}_defconfig
default setting of each board(This commit was automatically generated by a conversion script
based on boards.cfg)In Linux Kernel, defconfig files are located under
arch/${ARCH}/configs/ directory.
It works in Linux Kernel since ARCH is always given from the
command line for cross compile.But in U-Boot, ARCH is not given from the command line.
Which means we cannot know ARCH until the board configuration is done.
That is why all the "*_defconfig" files should be gathered into a
single directory ./configs/.Signed-off-by: Masahiro Yamada
Acked-by: Simon Glass
11 Mar, 2014
1 commit
-
Signed-off-by: Ian Campbell
Acked-by: Rob Herring
05 Mar, 2014
1 commit
-
Copied from Linux sources "include/linux/sizes.h" commit
413541dd66d51f791a0b169d9b9014e4f56be13cSigned-off-by: Alexey Brodkin
Cc: Vineet Gupta
Cc: Tom Rini
Cc: Stefan Roese
Cc: Albert Aribaud
Acked-by: Tom Rini
Acked-by: Stefan Roese
[trini: Add bcm Kona platforms to the patch]
Signed-off-by: Tom Rini
01 Nov, 2013
1 commit
-
Signed-off-by: Masahiro Yamada
Cc: Albert ARIBAUD
Cc: Andreas Bießmann
Cc: Stefano Babic
Cc: Prafulla Wadaskar
Cc: Minkyu Kang
Cc: Vipin Kumar
Cc: Tom Warren
Cc: Tom Rini
25 Jul, 2013
3 commits
-
Compile misc_init_r only if CONFIG_MISC_INIT_R is enabled.
Signed-off-by: Rob Herring
-
Accessing powered down peripherals will hang the bus, so check power
domain status before initializing SATA and fixup the FDT to disable
unused peripherals.Signed-off-by: Rob Herring
24 Jul, 2013
1 commit
-
Signed-off-by: Wolfgang Denk
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini
03 Feb, 2013
1 commit
-
Older compilers don't recognize v7 wfi instruction, so use wfi macro to
fix builds on old compilers.Signed-off-by: Rob Herring
29 Mar, 2012
4 commits
-
Add support to read the boot src register and set bootcmd env from the
selected bootcmdX env setting.Based on Linkstation boot choice selection.
Signed-off-by: Rob Herring
-
Implement reset for highbank platform. Reset is triggered via a wfi
instruction, so enabling armv7 for the compiler is necessary.Signed-off-by: Rob Herring
-
Add boot counter support using an sysreg which is persistent across reset.
Signed-off-by: Rob Herring
-
Add include of netdev.h to pick-up declaration of calxedaxgmac_initialize.
Signed-off-by: Rob Herring
06 Jan, 2012
1 commit
-
This enables the XGMAC ethernet driver and networking related config
options.Signed-off-by: Jason Hobbs
Signed-off-by: Rob Herring
28 Oct, 2011
1 commit
-
Add basic support for Calxeda Highbank platform. Only minimal support with
serial and SATA are included.Signed-off-by: Jason Hobbs
Signed-off-by: Rob Herring
Cc: Albert ARIBAUD