13 Mar, 2014
1 commit
-
Prior to Kbuild, $(TOPDIR) or $(SRCTREE) was used for
pointing to the top of source directory.
(No difference between the two.)In Kbuild style, $(srctree) is used instead.
This commit renames TOPDIR to srctree and delete the
defition of TOPDIR.Signed-off-by: Masahiro Yamada
13 Mar, 2013
1 commit
-
Refactor linker-generated array code so that symbols
which were previously linker-generated are now compiler-
generated. This causes relocation records of type
R_ARM_ABS32 to become R_ARM_RELATIVE, which makes
code which uses LGA able to run before relocation as
well as after.Note: this affects more than ARM targets, as linker-
lists span possibly all target architectures, notably
PowerPC.Conflicts:
arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
board/ait/cam_enc_4xx/u-boot-spl.lds
board/davinci/da8xxevm/u-boot-spl-da850evm.lds
board/davinci/da8xxevm/u-boot-spl-hawk.lds
board/vpac270/u-boot-spl.ldsSigned-off-by: Albert ARIBAUD
22 Oct, 2012
1 commit
-
This patch converts the old method of creating a list of command
onto the new LG-arrays code. The old u_boot_cmd section is converted
to new u_boot_list_cmd subsection and LG-array macros used as needed.Minor adjustments had to be made to the common code to work with the
LG-array macros, mostly the fixup_cmdtable() calls are now passed the
ll_entry_start and ll_entry_count instead of linker-generated symbols.The command.c had to be adjusted as well so it would use the newly
introduced LG-array API instead of directly using linker-generated
symbols.Signed-off-by: Marek Vasut
Cc: Joe Hershberger
Cc: Mike Frysinger
27 Sep, 2012
1 commit
-
Changes in v2:
- Reword a bit moreSigned-off-by: Tom Rini
15 Feb, 2012
1 commit
-
mention repeatable to README.commands and fix some typos
Signed-off-by: Peter Meerwald
Acked-by: Mike Frysinger
Tested-by: Marek Vasut
02 Jul, 2003
1 commit
-
get rid of MK_CMD_ENTRY macro; update doc/README.command
01 Jun, 2003
1 commit
-
Fixed rarp boot method for IA32 and other little-endian CPUs.
* Patch by Marc Singer, 28 May 2003:
Added port I/O commands.* Patch by Matthew McClintock, 28 May 2003
- cpu/mpc824x/start.S: fix relocation code when booting from RAM
- minor patches for utx8245* Patch by Daniel Engström, 28 May 2003:
x86 update* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
add nand flash support to SXNI855T configuration
fix/extend nand flash support:
- fix 'nand erase' command so does not erase bad blocks
- fix 'nand write' command so does not write to bad blocks
- fix nand_probe() so handles no flash detected properly
- add doc/README.nand
- add .jffs2 and .oob options to nand read/write
- add 'nand bad' command to list bad blocks
- add 'clean' option to 'nand erase' to write JFFS2 clean markers
- make NAND read/write faster* Patch by Rune Torgersen, 23 May 2003:
Update for MPC8266ADS board
20 Apr, 2003
1 commit
-
* MPC823 LCD driver: Fill color map backwards, to allow for steady
display when Linux takes over* Patch by Erwin Rol, 27 Feb 2003:
Add support for RTEMS (this time for real).* Add support for "bmp info" and "bmp display" commands to load
bitmap images; this can be used (for example in a "preboot"
command) to display a splash screen very quickly after poweron.* Add support for 133 MHz clock on INCA-IP board
12 Nov, 2002
1 commit
-
Increase number of network RX buffers (PKTBUFSRX in
"include/net.h") for EEPRO100 based boards (especially SP8240)
which showed "Receiver is not ready" errors when U-Boot was
processing the receive buffers slower than the network controller
was filling them.* Get rid of obsolete include/mpc74xx.h
03 Nov, 2002
1 commit