Eric Lee / smarc-uboot

23 Jan, 2020

1 commit

31 Dec, 2019

1 commit

24 Nov, 2019

1 commit

23 Nov, 2019

4 commits

  • a9af59a30   fastboot: rockchip: Select FASTBOOT_FLASH[_MMC_DEV] ... Browse Code »

    Select CONFIG_FASTBOOT_FLASH, CONFIG_FASTBOOT_FLASH_MMC_DEV
    for rockchip SoC plaforms in fastboot Kconfig file instead
    of defined it in board defconfig.

    This eventually drop the explicit configs defined in
    supporting board defconfig files.

    Tested-by: Levin Du
    Signed-off-by: Jagan Teki
    Reviewed-by: Kever Yang

    Jagan Teki
     
  • 132b012ed   gadget: rockchip: USB_GADGET_PRODUCT_NUM ... Browse Code »

    Rockchip support differnet or common gadget product number
    between Rockchip SoCs like,

    0x310a - rk3036
    0x320a - rk3229, rk3288
    0x330a - rk3328

    So, select them on Kconfig based on platform specific
    config defined.
       
    This eventually drop the explicit configs defined in
    supporting board defconfig files.

    Tested-by: Levin Du
    Signed-off-by: Jagan Teki
    Reviewed-by: Kever Yang

    Jagan Teki
     
  • 89cbceb38   gadget: Select USB_GADGET_VENDOR_NUM for rockchip ... Browse Code »

    Gadget vendor number, 0x2207 is common across all platfroms
    supported in Rockchip SoC.

    So, select the same number globally, if ARCH_ROCKCHIP.

    This eventually drop the explicit configs defined in supported
    board defconfig files.

    Tested-by: Levin Du
    Signed-off-by: Jagan Teki
    Reviewed-by: Kever Yang

    Jagan Teki
     
  • 89e311d49   gadget: Select USB_GADGET_MANUFACTURER for rockchip ... Browse Code »

    Select the gadget manufacturer as 'Rockchip' for
    all rockchip platform SoC's.

    This eventually drop the explicit defined added
    on supported board defconfig files.

    Tested-by: Levin Du
    Signed-off-by: Jagan Teki
    Reviewed-by: Kever Yang

    Jagan Teki
     

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

17 Nov, 2019

1 commit

12 Nov, 2019

2 commits

10 Nov, 2019

1 commit

  • ae2500f89   rockchip: rk3328: defconfig: no need to reserve IRAM for SPL ... Browse Code »

    We use to reserve IRAM to avoid the SPL text overlap with ATF M0 code,
    and when we introduce the TPL, the SPL space is in DRAM, we reserve
    space to avoid SPL text overlap with ATF bl31.

    Now we decide to move ATF entry point to 0x40000 instead of 0x1000,
    so that the SPL can have 0x4000 as code size and no need to reserve
    space or relocate before loading ATF.

    The mainline ATF has update since:
    0aad563c rockchip: Update BL31_BASE to 0x40000

    Signed-off-by: Kever Yang

    Kever Yang
     

08 Nov, 2019

1 commit

24 Oct, 2019

1 commit

  • 3e6ab7327   usb: dwc3: Kconfig: get rid of obsolete mode selection ... Browse Code »

    The mode selection for the DWC3 is kind of obsolete. The driver does not
    have to be host only or gadget only. This choice is confusing.
    All the remaining callers of dwc3_uboot_init() explicitly set dr_mode
    before calling the function, so none rely on a default behavior.

    Remove the choice menu and keep only the USB_DWC3_GADGET option. Enable it
    by default if USB_GADGET and USB_DWC3 are enabled.
    It must be disabled for the evb-rk3328 as it uses DWC2 for the gadget and
    DWC3 for the host.

    Signed-off-by: Jean-Jacques Hiblot

    Jean-Jacques Hiblot
     

23 Aug, 2019

1 commit

14 Aug, 2019

1 commit

05 Aug, 2019

1 commit

20 Jul, 2019

1 commit

26 Jun, 2019

1 commit

30 Apr, 2019

1 commit

26 Mar, 2019

1 commit

  • 14453fbfa   Convert CONFIG_SF_DEFAULT_* to Kconfig ... Browse Code »
    36

    This converts the following to Kconfig:
    CONFIG_SF_DEFAULT_BUS
    CONFIG_SF_DEFAULT_CS
    CONFIG_SF_DEFAULT_MODE
    CONFIG_SF_DEFAULT_SPEED

    I use moveconfig script and then manual check on generated u-boot.cfg
    to solve the remaining issue.

    Signed-off-by: Patrick Delaunay

    Patrick Delaunay
     

08 Feb, 2019

1 commit

07 Feb, 2019

1 commit

08 Jan, 2019

1 commit

07 Dec, 2018

1 commit

04 Sep, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

21 Jul, 2018

1 commit

  • a2a5053a1   rockchip: utilize CONFIG_DEFAULT_FDT_FILE ... Browse Code »

    Currently the fdtfile environment variable is set to
    CONFIG_DEFAULT_DEVICE_TREE which is іnternally used as U-Boot devicetree
    source. The OS can use a different filename and Kconfig gives us the
    ability to select a default devicetree via CONFIG_DEFAULT_FDT_FILE.
    This also gives user configuring U-Boot via menuconfig the behaviour
    someone would expect.

    Signed-off-by: Klaus Goger
    Tested-By: Vagrant Cascadian
    Reviewed-by: Philipp Tomsich
    Acked-by: Philipp Tomsich

    Klaus Goger
     

04 Jun, 2018

1 commit

30 May, 2018

1 commit

26 Apr, 2018

1 commit

09 Apr, 2018

1 commit

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

29 Jan, 2018

1 commit

17 Oct, 2017

1 commit

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

04 Oct, 2017

1 commit

  • a95aee6af   usb: gadget: Make g_dnl USB settings common ... Browse Code »

    The g_dnl USB settings for the vendor ID, product ID and manufacturer are
    actually common settings that can and should be shared by all the gadgets.

    Make them common by renaming them, and convert all the users.

    Reviewed-by: Simon Glass
    Reviewed-by: Lukasz Majewski
    Signed-off-by: Maxime Ripard

    Maxime Ripard
     

01 Oct, 2017

1 commit

02 Sep, 2017

1 commit