20 Aug, 2017
1 commit
-
ATF can leave the MMC IP in a state where U-Boot mmc driver
can't enumerate the eMMC.This patch provides a mmc0_reset_clk() function like we
already so do sd card controller which resets the IP
when entering U-Boot.With this patch applied eMMC partitions are successfully
enumerated again.=> mmc dev 0
switch to partitions #0, OK
mmc0(part 0) is current device
=> mmc partPartition Map for MMC device 0 -- Partition Type: EFI
Part Start LBA End LBA Name
Attributes
Type GUID
Partition GUID
1 0x00000800 0x00000fff "vrl"
attrs: 0x0000000000000000
type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
guid: 496847ab-56a1-4cd5-a1ad-47f4acf055c9
2 0x00001000 0x000017ff "vrl_backup"
attrs: 0x0000000000000000
type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
guid: 61a36fc1-8efb-4899-84d8-b61642efa723
3 0x00001800 0x00001fff "mcuimage"Signed-off-by: Peter Griffin
14 Aug, 2017
1 commit
-
If CONFIG_MMC_DW is not defined the return value of
init_dwmmc should not rely on a random stack value.Instead indicate that no error occured.
The problem was indicated by cppcheck.
Signed-off-by: Heinrich Schuchardt
11 Jul, 2017
1 commit
-
This port adds support for:
1) Serial
2) eMMC
3) USBIt has been tested with ARM TRUSTED FIRMWARE running u-boot as the
BL33 executable [see board's README]eMMC has been tested for reading and booting the loader and linux
kernels as well as saving the u-boot environment.USB has been tested with ASIX networking adapter and SanDisk 7.4GB
drive.PSCI has been tested via the reset call (PSCI executes from DDR)
The firwmare upgrade process has been tested via TFTP and USB FAT
filesystem containing the fastboot.bin image in one of the partitions.Signed-off-by: Jorge Ramirez-Ortiz
06 Jun, 2017
1 commit
-
Fix inaccurate instructions in README.
Signed-off-by: Michal Simek
15 May, 2017
1 commit
-
Now CONFIG_GENERIC_MMC and CONFIG_MMC match for all defconfig.
We do not need two options for the same feature. Deprecate the
former.This commit was generated with the sed script 's/GENERIC_MMC/MMC/'
and manual fixup of drivers/mmc/Kconfig.Signed-off-by: Masahiro Yamada
06 Apr, 2017
1 commit
-
By making dram_init_banksize() return an error code we can drop the
wrapper. Adjust this and clean up all implementations.Signed-off-by: Simon Glass
Reviewed-by: Stefan Roese
11 Jan, 2017
1 commit
-
This commit was created as follows:
[1] Rename the option with the following command:
find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
-type f -print | xargs sed -i -e 's/CONFIG_DWMMC/CONFIG_MMC_DW/g'[2] create the entry for MMC_DW in drivers/mmc/Kconfig
(the prompt and help were copied from Linux)[3] run "tools/moveconfig.py -y MMC_DW"
[4] add "depends on MMC_DW" to the MMC_DW_ROCKCHIP entry
[5] Clean-up doc/README.socfpga by hand
Signed-off-by: Masahiro Yamada
Reviewed-by: Marek Vasut
16 Jul, 2016
1 commit
-
Introduce virtual and physical addresses in the mapping table. This change
have no impact on existing boards because they all use idential mapping.Signed-off-by: York Sun
26 Apr, 2016
5 commits
-
This patch updates and simplifies the hikey README. The old
instructions were hard to follow, and convoluted.This patch also updates the link to the mcuimage.bin which was outdated.
Using an outdated mcuimage.bin results in the additional a53 cores
not coming online when the kernel issues PSCI requests to
arm trusted firmware (ATF).Signed-off-by: Peter Griffin
Reviewed-by: Tom Rini -
The memory node gets automatically generated by U-Boot
in arch_fixup_fdt(), before passing control to the kernel
using U-Boots representation of the dram banks.However the upstream kernel uses the memory node to carve-out
regions of RAM for various purposes. To make this work without
changing arch_fixup_fdt() which will effect many platforms
we replicate the upstream memory node layout using the dram
banks.Signed-off-by: Peter Griffin
Reviewed-by: Tom Rini -
This allows the reset command to reset the board from
u-boot.=> reset
resetting ...
INFO: BL1: 0xf9810000 - 0xf9818000 [size = 32768]
NOTICE: Booting Trusted Firmware
NOTICE: BL1: v1.1(debug):7fb9b0e
NOTICE: BL1: Built : 17:06:41, Apr 19 2016Signed-off-by: Peter Griffin
Reviewed-by: Tom Rini -
Currently only the serial pl01x driver is using DT,
and the other drivers still use platform data but
as more DT lands in the upstream kernel the aim is
to migrate the other drivers over to DT as well to
have a fully DT configured hikey u-boot.Signed-off-by: Peter Griffin
Reviewed-by: Tom Rini -
This patch adds myself as maintainer for the hikey
U-Boot port.Signed-off-by: Peter Griffin
Reviewed-by: Tom Rini
23 Mar, 2016
1 commit
-
Signed-off-by: Vagrant Cascadian
Reviewed-by: Simon Glass
Reviewed-by: Tom Rini
Reviewed-by: Peter Griffin
16 Mar, 2016
1 commit
-
The hikey runs with dcache disabled today. There really should be no reason
not to use caches on AArch64, so let's add MMU definitions and enable the
dcache.Signed-off-by: Alexander Graf
28 Sep, 2015
4 commits
-
Use DM for the pl01x serial driver on hikey. Also allow UART0 or
UART3 to be chosen via Kconfig.By default we now output to UART3 as the latest version of ATF outputs
to this UART. Also UART3 comes out on the LS connector, as opposed to
UART0 which goes to a unpopulated header.As part of this change we also enable CONFIG_BOARD_EARLY_INIT_F and
call the pinmux configuration code for the UART. Before we were
relying on ATF having already configured the pin configuration.NB: Upstream Linux kernel doesn't yet support UART3, so serial console
will still be output on UART0 when booting a upstream kernel.Signed-off-by: Peter Griffin
Reviewed-by: Simon Glass -
This causes exceptions and other strange behaviour
when enabling CONFIG_SYS_MALLOC_F_LEN which is required to
migrate the serial driver over to DM_SERIAL.As GD_FLG_FULL_MALLOC_INIT flag gets reset, after relocation
we don't end up using the full malloc which ultimately ends up
causing a synchronus abort.Signed-off-by: Peter Griffin
Reviewed-by: Simon Glass -
Rather than relying on an external URL in the README
include the Makefile in the hikey directory.Signed-off-by: Peter Griffin
-
The README had a few mistakes, and one of the URL's
had changed. Also update the boot log with the latest
boot trace from ATF, which now includes the mcuimage.bin.Signed-off-by: Peter Griffin
13 Aug, 2015
2 commits
-
To help others with compiling and flashing ATF and u-boot add
a README for this board.Signed-off-by: Peter Griffin
-
HiKey is the first 96boards consumer edition compliant board. It features a hi6220
SoC which has eight ARM A53 cpu's.This initial port adds support for: -
1) Serial
2) eMMC / SD card
3) USB
4) GPIOIt has been tested with Arm Trusted Firmware running u-boot as the BL33 executable.
Notes:
eMMC has been tested with basic reading of eMMC partition into DDR. I have not
tested writing / erasing. Due to lack of clock control it won't be
running in the most performant high speed mode.SD card slot has been tested for reading and booting kernels into DDR.
It is also currently configured to save the u-boot environment to the
SD card.USB has been tested with ASIX networking adapter to tftpboot kernels
into DDR. On v2015.07-rc2 dhcp now works, and also USB mass storage
are correctly enumerated.GPIO has been tested using gpio toggle GPIO4_1-3 to flash the LEDs.
Basic SoC datasheet can be found here: -
https://github.com/96boards/documentation/blob/master/hikey/
Hi6220V100_Multi-Mode_Application_Processor_Function_Description.pdfBoard schematic can be found here: -
https://github.com/96boards/documentation/blob/master/hikey/
96Boards-Hikey-Rev-A1.pdfSigned-off-by: Peter Griffin