14 Feb, 2019
1 commit
-
All options have been moved to Kconfig and there is no need to have
board header files. Mini configurations require them that's why they are
still there.Signed-off-by: Michal Simek
24 Jan, 2019
4 commits
-
Build warning was added by:
"fdt: Add warning about CONFIG_OF_EMBED"
(sha1: 841d5fbae4e993476fa87d8933db0cd58d3c2d41)ZynqMP mini configurations are not moved yet and it is questionable if
make sense to move them too.Signed-off-by: Michal Simek
-
Enable fpga load secure feature for xilinx platforms.
Signed-off-by: Michal Simek
-
Enable GQSPI driver, SF command and SPL support for some platforms.
Signed-off-by: Michal Simek
-
Setup proper ETH/MMC dependency for the whole platform.
Signed-off-by: Michal Simek
16 Oct, 2018
1 commit
-
Simplify defconfig for ZynqMP but keep option not to enable it for mini
targets.Signed-off-by: Michal Simek
04 Sep, 2018
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
18 Aug, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_MII
CONFIG_DRIVER_TI_EMACSigned-off-by: Adam Ford
Acked-by: Jagan Teki
Acked-by: Joe Hershberger
19 Jul, 2018
1 commit
-
CONFIG_MP was added to Kconfig with enabling CONFIG_DEFINE_TCM_OCM_MMAP=y
for zynqmp boards. This option is enabled by default that's why it
shouldn't be in defconfig.Signed-off-by: Michal Simek
11 Jul, 2018
1 commit
-
This patch moves CONFIG_MP to Kconfig
Signed-off-by: Siva Durga Prasad Paladugu
Signed-off-by: Michal Simek
04 Jun, 2018
1 commit
-
CONFIG_DEBUG_UART_BASE and CONFIG_DEBUG_UART_CLOCK have changed that's
why this sync.Signed-off-by: Michal Simek
11 May, 2018
1 commit
-
DISPLAY_BOARDINFO in OF case show model identification string from DT.
Enable this feature instead of custom IDENT_STRING which does the same
thing.Signed-off-by: Michal Simek
Reviewed-by: Alexander Graf
17 Apr, 2018
1 commit
-
We enabled CONFIG_ISO_PARTITION by default for distro boot, so that U-Boot
could load distro images that usually get shipped as iso images. These images
usually come with a board agnostic boot environment.However, there is very little point in having ISO support enabled (for anyone
really) in SPL, as the whole idea of SPL is to load U-Boot proper which again
is board specific. So the fact that we enable ISO support in U-Boot proper does
not mean at all that we want ISO support in U-Boot SPL.Hence, let's remove the Kconfig dependency. Along the way, let's also clean up
all those default configs that disabled SPL ISO support.Signed-off-by: Alexander Graf
09 Apr, 2018
5 commits
-
There is no memory which stores mac address that's why generate it.
Signed-off-by: Michal Simek
-
Enable ethernet phys for zc1751 dc5.
Signed-off-by: Michal Simek
-
U-Boot is now able to boot to ARM Trusted Firmware (ATF). The boot
flow is SPL(EL3) loads ATF and full u-boot and jump to ATF(EL3) which
pass control to full u-boot(EL2). This has been tested on zcu106, so
enable it in this defconfig.To generate an image that triggers this booting flow, you need to pass
'-O arm-trusted-firmware' to mkimage.Signed-off-by: Luca Ceresoli
Signed-off-by: Michal Simek -
Migrate the CONFIG_BOARD_EARLY_INIT_R option to Kconfig.
Signed-off-by: Mario Six
-
Migrate the CONFIG_SYS_ALT_MEMTEST option to Kconfig.
Signed-off-by: Mario Six
[trini: Re-run migration after also including CMD_MEMTEST]
Signed-off-by: Tom Rini
23 Mar, 2018
3 commits
-
Enable missing driver on this board.
Signed-off-by: Michal Simek
-
Make defconfigs up2date with current location.
Signed-off-by: Michal Simek
-
Use zynqmp clock driver instead of fixed clocks.
Signed-off-by: Michal Simek
11 Feb, 2018
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
30 Jan, 2018
1 commit
-
This patch moved ethernet PHY configs of ZynqMP boards
to respective defconfig.Signed-off-by: Vipul Kumar
Signed-off-by: Michal Simek
15 Dec, 2017
5 commits
-
Enable fpga loadb and loadbp for zynqmp platforms.
Signed-off-by: Michal Simek
-
Signed-off-by: Michal Simek
-
Enable misc devices for zynqmp targets.
Signed-off-by: Michal Simek
-
clk command provides an option to see actual clock setting.
Signed-off-by: Michal Simek
-
This was caused by: "fs/fat: Reduce stack usage"
(sha1:2460098cffacd18729262e3ed36656e6943783ed) which converted
fat code to use malloc. But simple malloc is not freeing space
that's why full malloc implementation is needed.
Malloc space is added to RAM.Signed-off-by: Michal Simek
28 Nov, 2017
2 commits
-
Showing uart earlier.
Signed-off-by: Michal Simek
-
Move cadence/zynq serial driver via Kconfig
Signed-off-by: Michal Simek
Reviewed-by: Simon Glass
17 Oct, 2017
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
11 Oct, 2017
1 commit
-
Having this as a 'default y' is rather annoying because it doesn't
actually compile unless other options are defined in the board header:../cmd/bootm.c: In function 'do_imls_nor':
../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {Make it 'default n' so people who develop new boards that start from a
blank defconfig have one less compilation failure to debug.Signed-off-by: Tuomas Tynkkynen
28 Aug, 2017
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
15 Aug, 2017
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
26 Jul, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_ENV_IS_IN_FATSigned-off-by: Simon Glass
10 Feb, 2017
1 commit
-
Keep all defconfig sorted to ensure the smallest diff.
Signed-off-by: Michal Simek
09 Feb, 2017
1 commit
-
CONFIG_CMD_ZIP is not defined by any board. I am moving
CONFIG_CMD_UNZIP to defconfig files except UniPhier SoC family.I am the maintainer of UniPhier platform, so I know "select CMD_UNZIP"
is better for this platform.Signed-off-by: Masahiro Yamada
Acked-by: Michal Simek
Acked-by: Stefan Roese
Acked-by: Ryan Harkin
Tested-by: Ryan Harkin
31 Jan, 2017
1 commit
-
Make the naming scheme consistent; all SDHCI-base drivers prefixed
with CONFIG_MMC_SDHCI_.While we are here, add "depends on ARCH_ZYNQ || ARCH_ZYNQMP".
Signed-off-by: Masahiro Yamada
28 Jan, 2017
1 commit
-
Signed-off-by: Patrick Delaunay
Signed-off-by: Patrick Delaunay
24 Jan, 2017
1 commit
-
This option should not really be user selectable. Note that on PowerPC
we currently only need BOARD_LATE_INIT when CHAIN_OF_TRUST is enabled so be
conditional on that.Signed-off-by: Tom Rini
Acked-by: Masahiro Yamada (for UniPhier)