Eric Lee / smarc-uboot

09 Mar, 2018

1 commit

  • d38826a3d   treewide: Fix gdsys mail addresses ... Browse Code »

    The @gdsys.cc addresses are supposed to be used for mailing lists.
    Switch all occurrences of @gdsys.de mail addresses to their @gdsys.cc
    equivalent.

    Also, Dirk's address was wrong in one place; fix that as well.

    Signed-off-by: Mario Six

    Mario Six
     

24 Feb, 2018

1 commit

  • d021e9421   Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_BOOTP_BOOTPATH
    CONFIG_BOOTP_DNS
    CONFIG_BOOTP_GATEWAY
    CONFIG_BOOTP_HOSTNAME
    CONFIG_BOOTP_PXE
    CONFIG_BOOTP_SUBNETMASK
    CONFIG_CMDLINE_EDITING
    CONFIG_AUTO_COMPLETE
    CONFIG_SYS_LONGHELP
    CONFIG_SUPPORT_RAW_INITRD
    CONFIG_ENV_VARS_UBOOT_CONFIG

    Signed-off-by: Adam Ford
    [trini: Re-run the migration]
    Signed-off-by: Tom Rini

    Adam Ford
     

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

04 Sep, 2017

2 commits

12 Aug, 2017

1 commit

26 Jul, 2017

2 commits

  • 85fc970d7   Convert CONFIG_ENV_IS_IN_FLASH to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_FLASH

    Signed-off-by: Simon Glass

    Simon Glass
     
  • 2be296538   Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig ... Browse Code »
    20

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_MMC
    CONFIG_ENV_IS_IN_NAND
    CONFIG_ENV_IS_IN_UBI
    CONFIG_ENV_IS_NOWHERE

    In fact this already exists for sunxi as a 'choice' config. However not
    all the choices are available in Kconfig yet so we cannot use that. It
    would lead to more than one option being set.

    In addition, one purpose of this series is to allow the environment to be
    stored in more than one place. So the existing choice is converted to a
    normal config allowing each option to be set independently.

    There are not many opportunities for Kconfig updates to reduce the size of
    this patch. This was tested with

    ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

    And then manual updates. This is because for CHAIN_OF_TRUST boards they
    can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
    now.

    Signed-off-by: Simon Glass
    Signed-off-by: Tom Rini

    Simon Glass
     

23 May, 2017

1 commit

22 May, 2017

1 commit

20 Mar, 2017

1 commit

13 Feb, 2017

1 commit

  • e856bdcfb   flash: complete CONFIG_SYS_NO_FLASH move with renaming ... Browse Code »
    20

    We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is
    not completed. Finish this work by the tool.

    During this move, let's rename it to CONFIG_MTD_NOR_FLASH.
    Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH"
    than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic will
    make the code more readable. Besides, negative meaning symbols do
    not fit in obj-$(CONFIG_...) style Makefiles.

    This commit was created as follows:

    [1] Edit "default n" to "default y" in the config entry in
    common/Kconfig.

    [2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH"

    [3] Rename the instances in defconfigs by the following:
    find . -path './configs/*_defconfig' | xargs sed -i \
    -e '/CONFIG_SYS_NO_FLASH=y/d' \
    -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/'

    [4] Change the conditionals by the following:
    find . -name '*.[ch]' | xargs sed -i \
    -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \
    -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \
    -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \
    -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/'

    [5] Modify the following manually
    - Rename the rest of instances
    - Remove the description from README
    - Create the new Kconfig entry in drivers/mtd/Kconfig
    - Remove the old Kconfig entry from common/Kconfig
    - Remove the garbage comments from include/configs/*.h

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

31 Jan, 2017

1 commit

  • 54925327f   mmc: move CONFIG_GENERIC_MMC to Kconfig ... Browse Code »
    40

    Now, CONFIG_GENERIC_MMC seems equivalent to CONFIG_MMC.

    Let's create an entry for "config GENERIC_MMC" with "default MMC",
    then convert all macro defines in headers to Kconfig. Almost all
    of the defines will go away.

    I see only two exceptions:
    configs/blanche_defconfig
    configs/sandbox_noblk_defconfig

    They define CONFIG_GENERIC_MMC, but not CONFIG_MMC. Something
    might be wrong with these two boards, so should be checked later.

    Anyway, this is the output of the moveconfig tool.

    This commit was created as follows:

    [1] create a config entry in drivers/mmc/Kconfig

    [2] tools/moveconfig.py -r HEAD GENERIC_MMC

    [3] manual clean-up of garbage comments in doc/README.* and
    include/configs/*.h

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Tom Rini

    Masahiro Yamada
     

28 Jan, 2017

1 commit

26 Jan, 2017

1 commit

05 Jan, 2017

1 commit

30 Dec, 2016

1 commit

  • c27269953   mmc: complete unfinished move of CONFIG_MMC ... Browse Code »
    26

    Commit 7a777f6d6f35 ("mmc: Add generic Kconfig option") created
    a Kconfig entry for this option without any actual moves, then
    commit 44c798799f66 ("sunxi: Use Kconfig CONFIG_MMC") moved
    instances only for SUNXI.

    We generally do not like such partial moves. This kind of work
    is automated by tools/moveconfig.py, so it is pretty easy to
    complete this move.

    I am adding "default ARM || PPC || SANDBOX" (suggested by Tom).
    This shortens the configs and will ease new board porting.

    This commit was created as follows:

    [1] Edit Kconfig (remove the "depends on", add the "default",
    copy the prompt and help message from Linux)

    [2] Run 'tools/moveconfig.py -y -s -r HEAD MMC'

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Jaehoon Chung

    Masahiro Yamada
     

28 Oct, 2016

2 commits

24 Oct, 2016

1 commit

20 Sep, 2016

1 commit

02 Jul, 2016

1 commit

  • 2fbb8462b   autoboot: remove CONFIG_ZERO_BOOTDELAY_CHECK ... Browse Code »

    As the help message of CONFIG_BOOTDELAY says, CONFIG_BOOTDELAY=-2
    means the autoboot with no delay, with no abort check even if
    CONFIG_ZERO_BOOTDELAY_CHECK is defined.

    To sum up, the autoboot behaves as follows:

    [1] CONFIG_BOOTDELAY=0 && CONFIG_ZERO_BOOTDELAY_CHECK=y
    autoboot with no delay, but you can abort it by key input

    [2] CONFIG_BOOTDELAY=0 && CONFIG_ZERO_BOOTDELAY_CHECK=n
    autoboot with no delay, with no check for abort

    [3] CONFIG_BOOTDELAY=-1
    disable autoboot

    [4] CONFIG_BOOTDELAY=-2
    autoboot with no delay, with no check for abort

    As you notice, [2] and [4] come to the same result, which means we
    do not need CONFIG_ZERO_BOOTDELAY_CHECK. We can control all the
    cases only by CONFIG_BOOTDELAY, like this:

    [1] CONFIG_BOOTDELAY=0
    autoboot with no delay, but you can abort it by key input

    [2] CONFIG_BOOTDELAY=-1
    disable autoboot

    [3] CONFIG_BOOTDELAY=-2
    autoboot with no delay, with no check for abort

    This commit converts the logic as follow:
    CONFIG_BOOTDELAY=0 && CONFIG_ZERO_BOOTDELAY_CHECK=n
    --> CONFIG_BOOTDELAY=-2

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Stefan Roese
    Acked-by: Igor Grinberg
    Reviewed-by: Simon Glass
    Acked-by: Vladimir Zapolskiy
    Reviewed-by: Heiko Schocher
    Acked-by: Christian Riesch
    Acked-by: Hannes Schmelzer

    Masahiro Yamada
     

10 Jun, 2016

1 commit

26 Apr, 2016

4 commits

15 Mar, 2016

2 commits

  • 73223f0e1   Kconfig: Move CONFIG_FIT and related options to Kconfig ... Browse Code »

    There are already two FIT options in Kconfig but the CONFIG options are
    still in the header files. We need to do a proper move to fix this.

    Move these options to Kconfig and tidy up board configuration:

    CONFIG_FIT
    CONFIG_OF_BOARD_SETUP
    CONFIG_OF_SYSTEM_SETUP
    CONFIG_FIT_SIGNATURE
    CONFIG_FIT_BEST_MATCH
    CONFIG_FIT_VERBOSE
    CONFIG_OF_STDOUT_VIA_ALIAS
    CONFIG_RSA

    Unfortunately the first one is a little complicated. We need to make sure
    this option is not enabled in SPL by this change. Also this option is
    enabled automatically in the host builds by defining CONFIG_FIT in the
    image.h file. To solve this, add a new IMAGE_USE_FIT #define which can
    be used in files that are built on the host but must also build for U-Boot
    and SPL.

    Note: Masahiro's moveconfig.py script is amazing.

    Signed-off-by: Simon Glass
    [trini: Add microblaze change, various configs/ re-applies]
    Signed-off-by: Tom Rini

    Simon Glass
     
  • 69e173eb5   Move CONFIG_OF_LIBFDT to Kconfig ... Browse Code »
    66

    Move this option to Kconfig and tidy up existing boards.

    Signed-off-by: Simon Glass

    Simon Glass
     

22 Nov, 2015

1 commit

13 Nov, 2015

3 commits

30 Oct, 2015

1 commit

25 Oct, 2015

2 commits

13 Aug, 2015

1 commit

  • 181bd9dc6   kconfig: add config option for shell prompt ... Browse Code »
    102

    Add option to set shell prompt string from menuconfig and migrate
    boards globally.

    The migration is done as follows:
    - Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the
    entry moved to their defconfig files.
    - Boards that defined some kind of #ifdef logic which selects the
    CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT
    right before the #ifdef logic and were left alone.
    - This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus
    CONFIG_SYS_PROMPT was removed from all _common.h and _common.h
    files. This results in a streamlined default value across platforms, and
    includes the following files: spear-common, sunxi-common, mv-common,
    ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common.
    - Boards that relied on _common.h values of CONFIG_SYS_PROMPT were
    not updated in their respective defconfig files under the assumption that
    since they did not explicitly define a value, they're fine with whatever
    the default is.
    - On the other hand, boards that relied on a value defined in some
    _common.h file such as woodburn_common, rpi-common,
    bur_am335x_common, ls2085a_common, siemens_am33x_common, and
    omap3_evm_common, had their values moved to the respective defconfig files.
    - The define V_PROMPT was removed, since it is not used anywhere except for
    assigning a value for CONFIG_SYS_PROMPT.

    Cc: Tom Rini
    Cc: Masahiro Yamada
    Cc: Stefano Babic
    Cc: Igor Grinberg
    Signed-off-by: Nikita Kiryanov
    [trini: Add spring, sniper, smartweb to conversion]
    Signed-off-by: Tom Rini

    Nikita Kiryanov
     

26 Jun, 2015

1 commit

09 Jun, 2015

1 commit

  • d126e0164   autoboot.c: Move config options to Kconfig ... Browse Code »

    This patch moves the following config options to Kconfig:

    CONFIG_AUTOBOOT_KEYED
    CONFIG_AUTOBOOT_PROMPT
    CONFIG_AUTOBOOT_DELAY_STR
    CONFIG_AUTOBOOT_STOP_STR
    AUTOBOOT_KEYED_CTRLC

    Signed-off-by: Stefan Roese
    Reviewed-by: Simon Glass
    [trini: Drop ip04 and pm9263 configs/ additions, those boards previously
    set CONFIG_AUTOBOOT_PROMPT but never used it, re-run savedefconfig over
    all boards that did change. Make digsy_mtc_* string include seconds to
    match others and not warn. ]
    Signed-off-by: Tom Rini
    Cc: Masahiro Yamada

    Stefan Roese
     

01 Jun, 2015

1 commit