13 Dec, 2017
2 commits
-
This symbol enables some library code used by various SATA drivers,
so make this a non-user-visible symbol select'ed by the respective
drivers, and let moveconfig handle the rest.Signed-off-by: Tuomas Tynkkynen
-
Signed-off-by: Tuomas Tynkkynen
04 Sep, 2017
1 commit
-
Now that the fallback value of CONFIG_SYS_PBSIZE in
include/config_fallbacks.h has been adjusted, remove its definition
from a large number of board configuration files.Signed-off-by: Thomas Petazzoni
Reviewed-by: Tom Rini
08 Aug, 2017
3 commits
-
Signed-off-by: Alexandru Gagniuc
Acked-by: Joe Hershberger -
Signed-off-by: Alexandru Gagniuc
Acked-by: Joe Hershberger -
These boards will now use the ksz90x1 driver instead of the mess in
ksz8xxx. This change is needed before the two drivers can be fully
separated.Signed-off-by: Alexandru Gagniuc
Acked-by: Joe Hershberger
26 Jul, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_ENV_IS_IN_MMC
CONFIG_ENV_IS_IN_NAND
CONFIG_ENV_IS_IN_UBI
CONFIG_ENV_IS_NOWHEREIn fact this already exists for sunxi as a 'choice' config. However not
all the choices are available in Kconfig yet so we cannot use that. It
would lead to more than one option being set.In addition, one purpose of this series is to allow the environment to be
stored in more than one place. So the existing choice is converted to a
normal config allowing each option to be set independently.There are not many opportunities for Kconfig updates to reduce the size of
this patch. This was tested with./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC
And then manual updates. This is because for CHAIN_OF_TRUST boards they
can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
now.Signed-off-by: Simon Glass
Signed-off-by: Tom Rini
12 Jul, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_CMD_SATASigned-off-by: Simon Glass
Reviewed-by: Bin Meng
30 Apr, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_CMD_BMODESigned-off-by: Simon Glass
[trini: Make this default y and depend on mx5/6/7]
Signed-off-by: Tom Rini
29 Jan, 2017
1 commit
-
In the cases of some boards, a MACH_TYPE number is used which is either
not registered upstream or worse (for functionality) is re-using the
number of a different (or reference) platform instead. Make sure we
have a comment in these cases.Cc: Albert ARIBAUD
Cc: Walter Schweizer
Cc: Stefan Roese
Cc: Fabio Estevam
Signed-off-by: Tom Rini
Acked-by: Stefan Roese
26 Jan, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_BOARD_EARLY_INIT_FSigned-off-by: Simon Glass
22 Jan, 2017
1 commit
-
Cc: Tom Rini
Signed-off-by: Jagan Teki
17 Sep, 2016
2 commits
-
Move this option to Kconfig and tidy up existing uses.
Signed-off-by: Simon Glass
-
Move this option to Kconfig and tidy up existing uses.
Signed-off-by: Simon Glass
26 Apr, 2016
2 commits
-
Update the config.h and defconfig files for the commands that 8e3c036
converted over to KconfigSigned-off-by: Tom Rini
-
This syncs up the current cmd/Kconfig and include/configs/ files with the
only exception being CMD_NAND. Due to how we have used this historically
we need to take further care here when converting.Signed-off-by: Tom Rini
20 Jan, 2016
1 commit
-
That way the FS can also be ext2/3/4
Signed-off-by: Oscar Curero
Acked-by: Fabio Estevam
02 Sep, 2015
2 commits
-
Use dd'ed SPL and u-boot.img by default.
Signed-off-by: Peter Vicman
Cc: Fabio Estevam
Cc: Stefano Babic
Reviewed-by: Stefano Babic
Acked-by: Fabio Estevam -
Currently we need to build one U-boot image for each of the udoo
variants: quad and dual-lite.By switching to SPL we can support all two variants with a single binary.
Based on the SPL for wandboard.
Tested with OpenELEC (Open Embedded Linux Entertainment Center)
on both boards.Signed-off-by: Peter Vicman
Cc: Fabio Estevam
Cc: Stefano Babic
Acked-by: Stefano Babic
Signed-off-by: Peter Vicman
Acked-by: Fabio Estevam
01 Jun, 2015
2 commits
-
This also selects CONFIG_NET for any CONFIG_CMD_NET board.
Remove the imx default for CONFIG_NET.
This moves the config that was defined by 60296a8 (commands: add more
command entries in Kconfig).Signed-off-by: Joe Hershberger
-
Another shell scripting command that has not been moved.
Moved using tools/moveconfig.py using these settings:
CMD_SETEXPR bool n y
Signed-off-by: Joe Hershberger
Cc: Masahiro Yamada
26 May, 2015
9 commits
-
Move CONFIG_CMD_CACHE to mx6_common and standardise the way it's defined.
Signed-off-by: Peter Robinson
Reviewed-by: Tom Rini -
Move all standard mx6 MMC configs to mx6_common.
Signed-off-by: Peter Robinson
Reviewed-by: Tom Rini -
Move all standard filesystem, partition and fdt options to mx6_common.
Signed-off-by: Peter Robinson
-
Move generic miscellaneous options that are standard across most, if not all,
mx6 boards to central mx6_common define to ensure consistent features.Signed-off-by: Peter Robinson
-
Define common LOADADDR and BOOTDELAY to ensure a consistent experience
across mx6 boardsSigned-off-by: Peter Robinson
-
Define CONFIG_MXC_GPIO and CONFIG_CMD_GPIO by default in mx6_common
Signed-off-by: Peter Robinson
-
Define the standard ATAG consfigs in mx6_common.
Signed-off-by: Peter Robinson
Reviewed-by: Tom Rini -
All boards define CONFIG_MX6, CONFIG_DISPLAY_BOARDINFO, CONFIG_DISPLAY_CPUINFO
and CONFIG_SYS_GENERIC_BOARD so define them in mx6_commonSigned-off-by: Peter Robinson
Reviewed-by: Tom Rini -
The linux/sizes.h, asm/arch/imx-regs.h, asm/imx-common/gpio.h,
config_cmd_default.h includes are used fairly universally across imx6 boards
so include them in mx6_common.h by default.We define CONFIG_SYS_NO_FLASH before config_cmd_default.h so that we
don't have to undef CONFIG_CMD_FLASH / CONFIG_CMD_IMLS everywhere.Signed-off-by: Peter Robinson
23 Nov, 2014
1 commit
-
Since commit 0defddc851ed (config: Add a default CONFIG_SYS_PROMPT),
each board header does not need to define CONFIG_SYS_PROMPT
as long as it uses the default prompt "=> ".Signed-off-by: Masahiro Yamada
28 Apr, 2014
1 commit
-
Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following warning on
boot:"Warning: Your board does not use generic board. Please read
doc/README.generic-board and take action. Boards not
upgraded by the late 2014 may break or be removed."Signed-off-by: Fabio Estevam
05 Mar, 2014
1 commit
-
Copied from Linux sources "include/linux/sizes.h" commit
413541dd66d51f791a0b169d9b9014e4f56be13cSigned-off-by: Alexey Brodkin
Cc: Vineet Gupta
Cc: Tom Rini
Cc: Stefan Roese
Cc: Albert Aribaud
Acked-by: Tom Rini
Acked-by: Stefan Roese
[trini: Add bcm Kona platforms to the patch]
Signed-off-by: Tom Rini
20 Feb, 2014
1 commit
-
Conflicts:
Makefile
drivers/net/npe/MakefileThese two conflicts arise from commit 0b2d3f20
("ARM: NET: Remove the IXP NPE ethernet driver") and are
resolved by deleting the drivers/net/npe/Makefile file
and removing the CONFIG_IXP4XX_NPE line from Makefile.
19 Feb, 2014
1 commit
-
This commit removes platform CONFIG_SYS_HZ definition for the
remainders of part1 (commit cdb23792) and part2 (commit f232950f).Signed-off-by: Masahiro Yamada
Cc: Rob Herring
11 Feb, 2014
1 commit
-
Change the default environment to use zImage instead of uImage, this
requires changes to the default environment to load a file named
zImage instead of uImage, and to use the 'bootz' command instead of
'bootm' when booting the kernel.Signed-off-by: Otavio Salvador
03 Jan, 2014
1 commit
-
This patch fixes allow for the DeviceTree and initrd relocation fixing
the boot of FSL 3.10.9-1.0.0-alpha kernel.This changes following boards:
- mx6sabreauto
- mx6sabresd
- wandboard
- udoo
- nitrogen6x
- cgtqmx6evalThe reasoning, as explained by Hui Liu, is:
,----
| The FDT blob will be placed at DDR physical addr: 0x11000000. When Linux kernel
| Boot up, it will decompress the compressed kernel image and place the decompressed
| kernel image at the low end of the DDR memory and start running from it. If the
| decompressed kernel image is bigger for example than 16M, it may over written the
| fdt blob which u-boot loaded to the DDR memory @0x11000000 with fdt_addr=0x11000000
|
| To expand the fdt_addr from 0x11000000 to 0x18000000, which can avoid the override
| Since we will not likely have one kernel image larger than 128MB.
`----Signed-off-by: Otavio Salvador
Acked-by: Stefano Babic
18 Dec, 2013
2 commits
-
The CPU errata expressed in include/configs/mx6_common.h apply
to all i.MX6DQ and i.MX6DLS parts.Signed-off-by: Eric Nelson
Reviewed-by: Fabio Estevam
Acked-by: Stefan Roese -
Add SATA support on uDoo Board.
Signed-off-by: Giuseppe Pagano
CC: Stefano Babic
CC: Fabio Estevam
28 Nov, 2013
1 commit
-
Add Ethernet and networking support on uDoo board (FEC +phy Micrel KSZ9031).
Ethernet speed is currently limited to 10/100Mbps.Signed-off-by: Giuseppe Pagano
Tested-by: Fabio Estevam
CC: Stefano Babic
CC: Fabio Estevam