01 Feb, 2010
1 commit
-
Fix compile error:
cmd_ximg.c: In function 'do_imgextract':
cmd_ximg.c:234: error: 'i' undeclared (first use in this function)
cmd_ximg.c:234: error: (Each undeclared identifier is reported only once
cmd_ximg.c:234: error: for each function it appears in.)Signed-off-by: Wolfgang Denk
28 Jan, 2010
2 commits
-
imximage.c: In function 'imximage_parse_cfg_file':
imximage.c:142: warning: implicit declaration of function 'getline'Signed-off-by: Kumar Gala
27 Jan, 2010
11 commits
-
Support disabling of a core via user command 'cpu disable'.
Signed-off-by: Kumar Gala
-
Support disabling of a core via user command 'cpu disable'.
Signed-off-by: Kumar Gala
-
Add a disable sub-command to the cpu command that allows for disabling
cores in multicore processors. This can be useful for systems that are
using multicore chips but aren't utilizing all the cores as a way to
reduce power and possibly improve performance.Also updated an added missing copyright.
Signed-off-by: Kumar Gala
-
- delete double MTDIDS_DEFAULT and MTDPARTS_DEFAULT
defines in board config file.
- add mising CONFIG_KM_UBI_PARTITION_NAME defineSigned-off-by: Heiko Schocher
Signed-off-by: Kim Phillips -
imxtract currently can not handle compressed images. This patch adds
handling for bzip2 and zip compression. In both cases, a destination
address has to be specified for extraction.Signed-off-by: Wolfgang Wegner
-
This is no loger needed, free up r14 for general usage.
Signed-off-by: Joakim Tjernlund
-
r14 is no longer used as non volatile GOT ptr. Instead
the volatile r12 is used so be sure to do GET_GOT in
asm code when you need to access global data.Signed-off-by: Joakim Tjernlund
-
r14 is not supposed to be clobbered by functions. Switch
to r12 and call GET_GOT when needed. This will allow u-boot
to loose the -ffixed-r14 gcc option.Signed-off-by: Joakim Tjernlund
-
Using the GOT in IRQ handlers requires r14 to be -ffixed-r14.
Avoid this by relocatate transfer_to_handler too.
This will allow to free up r14 later on.Signed-off-by: Joakim Tjernlund
26 Jan, 2010
14 commits
-
Signed-off-by: Vivek Mahajan
Signed-off-by: Kumar Gala -
Since 1.0 and 2.0 use different snum table,
we fixup the snum value according to SPRN_SVR.Signed-off-by: Liu Yu
Signed-off-by: Kumar Gala -
The real clock divider is 4 times of the bits LCRR[CLKDIV],
according the latest RevF RM.Signed-off-by: Dave Liu
Signed-off-by: Kumar Gala -
Signed-off-by: Liu Yu
Signed-off-by: Kumar Gala -
Signed-off-by: Liu Yu
Signed-off-by: Kumar Gala -
Fix typo in SYSCTL_CLOCK_MASK, which caused residual in high bits of SDCLKFS.
Signed-off-by: Jin Qing
Signed-off-by: Li Yang
Signed-off-by: Kumar Gala -
This reverts commit bc20f9a9527afe8ae406a74f74765d4323f04922.
The original code was correct. I clearly need glasses or a brown
paper bag.Signed-off-by: Kumar Gala
-
The masks for MEM_PLL_RAT and SYS_PLL_RAT should have been 5-bits
instead of 4.Signed-off-by: James Yang
Signed-off-by: Kumar Gala -
Commit b5b004ad8a0ac6f98bd5708ec8b22fbddd1c1042 caused the sector_size to
be calculated incorrectly when the part size was not hardcoded. This is
because the new code relied on part->size but tried to do the calculation
before it was initialized properly, and it did not take into consideration
the magic SIZE_REMAINING define.Signed-off-by: Mike Frysinger
-
At least on OS X 10.5 and older, getline does not exist. So split out the
function from the mingw code so that we can pull it in for Darwin systems.Signed-off-by: Mike Frysinger
-
The current libfdt object rules hard depend implicitly on the .depend file
being correct. If it isn't, then it is unable to properly compile the
objects. Give it a full path like all the other implicit rules here so it
will always work in face of .depend issues.Signed-off-by: Mike Frysinger
-
If you really want to slim down U-Boot and you would rather use a higher
compression scheme (like LZMA), it'd be nice to disable gzip/zlib since
these code bases take up a significant amount of space.Signed-off-by: Mike Frysinger
-
This patch adds support for "imximage" (MX Boot Image)
to the mkimage utility. The imximage is used on the Freescales's
MX.25, MX.35 and MX.51 processors.Further details under doc/README.imximage.
This patch was tested on a Freescale mx51evk board.
Signed-off-by: Stefano Babic
-
Signed-off-by: Detlev Zundel
24 Jan, 2010
2 commits
-
Content of the RSR is put into gd early so we can output it together
with the CPU info. The clearing of gd in board_init_f is redundant for
this architecture as it is done in cpu_init_f so we remove it.Signed-off-by: Detlev Zundel
23 Jan, 2010
10 commits
-
Normally the processor clock has a divisor of 2.
In some cases this this needs to be set to 4.
Check the user has set environment mdiv to 4 to change the divisor.Signed-off-by: Daniel Gorsulowski
-
SPEAr320 SoC support contains basic spear320 support along with the
usage of following drivers
- serial driver(UART)
- i2c driver
- smi driver
- nand driver(FSMC)
- usbd driver
- emi driver(cfi support)Signed-off-by: Vipin
-
SPEAr310 SoC support contains basic spear310 support along with the
usage of following drivers
- serial driver(UART)
- i2c driver
- smi driver
- nand driver(FSMC)
- usbd driver
- emi driver(cfi support)Signed-off-by: Vipin
-
SPEAr310 and SPEAr320 SoCs contain an EMI controller to interface
Paraller NOR flashes. This patch adds the support for this IPThe standard CFI driver is used to interface with NOR flashes
Signed-off-by: Vipin
-
SPEAr300 SoC support contains basic spear300 support along with the
usage of following drivers
- serial driver(UART)
- i2c driver
- smi driver
- nand driver(FSMC)
- usbd driverSigned-off-by: Vipin
-
This patch adds the support to read and write mac id from i2c
memory.
For reading:
if (env contains ethaddr)
pick env ethaddr
else
pick ethaddr from i2c memory
For writing:
chip_config ethaddr XX:XX:XX:XX:XX:XX writes the mac id
in i2c memorySigned-off-by: Vipin
-
SPEAr600 SoC support contains basic spear600 support along with the
usage of following drivers
- serial driver(UART)
- i2c driver
- smi driver
- nand driver(FSMC)
- usbd driverSigned-off-by: Vipin
-
SPEAr SoCs contain a synopsys usb device controller.
USB Device IP can work in 2 modes
- DMA mode
- Slave modeThe driver adds support only for slave mode operation of usb
device IP. This driver is used along with standard USBTTY
driver to obtain a tty interface over USB on the hostSigned-off-by: Vipin
-
SPEAr SoCs contain an FSMC controller which can be used to interface
with a range of memories eg. NAND, SRAM, NOR.
Currently, this driver supports interfacing FSMC with NAND memoriesSigned-off-by: Vipin
-
SPEAr SoCs contain a serial memory interface controller. This
controller is used to interface with spi based memories.
This patch adds the driver for this IP.Signed-off-by: Vipin
