Eric Lee / smarc-uboot

09 Feb, 2020

1 commit

  • 72732318a   cmd: mdc/mwc: normalize disjoint MX_CYCLIC usage ... Browse Code »

    Both CMD_MX_CYCLIC and MX_CYCLIC are in use and defined in Kconfig,
    but only the non-CMD version currently does anything. This changes all
    usages to prefer the CMD_MX_CYCLIC option (since it's only affecting
    addition of the commands), and switches defconfigs using the non-CMD
    version to use the CMD version.

    Signed-off-by: Joel Johnson
    Reviewed-by: Tom Rini

    Joel Johnson
     

05 Dec, 2019

1 commit

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

24 Aug, 2019

1 commit

18 May, 2019

1 commit

  • a0aba8a2e   CONFIG_SYS_[DI]CACHE_OFF: convert to Kconfig ... Browse Code »

    CONFIG_SYS_[DI]CACHE_OFF had been partially converted to Kconfig
    parameters; only for the ARC architecture. This patch turns these two
    parameters into Kconfig items everywhere else they are found.

    All of the include/configs/* and defconfig changes in this patch are
    for arm machines only. The Kconfig changes for arc, nds32, riscv,
    and xtensa have been included since these symbols are found in code
    under arch/{arc,nds32,riscv,xtensa}, however, no currently-defined
    include/configs/* or defconfigs for these architectures exist which
    include these symbols.

    These results have been confirmed with tools/moveconfig.py.

    Acked-by: Alexey Brodkin
    Signed-off-by: Trevor Woerner
    [trini: Re-migrate for a few more boards]
    Signed-off-by: Tom Rini

    Trevor Woerner
     

18 Aug, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

04 Jun, 2018

1 commit

30 May, 2018

1 commit

  • 312a10f16   fastboot: Move fastboot to drivers/fastboot ... Browse Code »

    Separate CMD_FASTBOOT from FASTBOOT and move code and configuration to
    drivers/fastboot.

    Switch dependencies on FASTBOOT to USB_FUNCTION_FASTBOOT as anyone who wants
    FASTBOOT before this series wants USB_FUNCTION_FASTBOOT. Split
    USB_FUNCTION_FASTBOOT from FASTBOOT so they retain their existing
    behaviour.

    Signed-off-by: Alex Kiernan
    Reviewed-by: Simon Glass
    Acked-by: Joe Hershberger

    Alex Kiernan
     

28 Feb, 2018

1 commit

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

04 Oct, 2017

2 commits

  • cfa34996b   cmd: fastboot: Rework fastboot dependency ... Browse Code »

    Fastboot need a bunch of options to be operating properly, such as the
    g_dnl gadget, the fastboot command, and some options that make sense. Since
    fastboot is now part of Kconfig, make sure we have them right.

    That will also reduce the boilerplate in the defconfigs.

    Reviewed-by: Łukasz Majewski
    Reviewed-by: Simon Glass
    Signed-off-by: Maxime Ripard

    Maxime Ripard
     
  • a95aee6af   usb: gadget: Make g_dnl USB settings common ... Browse Code »

    The g_dnl USB settings for the vendor ID, product ID and manufacturer are
    actually common settings that can and should be shared by all the gadgets.

    Make them common by renaming them, and convert all the users.

    Reviewed-by: Simon Glass
    Reviewed-by: Lukasz Majewski
    Signed-off-by: Maxime Ripard

    Maxime Ripard
     

02 Sep, 2017

1 commit

28 Aug, 2017

1 commit

15 Aug, 2017

1 commit

26 Jul, 2017

1 commit

  • 2be296538   Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig ... Browse Code »
    20

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_MMC
    CONFIG_ENV_IS_IN_NAND
    CONFIG_ENV_IS_IN_UBI
    CONFIG_ENV_IS_NOWHERE

    In fact this already exists for sunxi as a 'choice' config. However not
    all the choices are available in Kconfig yet so we cannot use that. It
    would lead to more than one option being set.

    In addition, one purpose of this series is to allow the environment to be
    stored in more than one place. So the existing choice is converted to a
    normal config allowing each option to be set independently.

    There are not many opportunities for Kconfig updates to reduce the size of
    this patch. This was tested with

    ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

    And then manual updates. This is because for CHAIN_OF_TRUST boards they
    can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
    now.

    Signed-off-by: Simon Glass
    Signed-off-by: Tom Rini

    Simon Glass
     

28 Jan, 2017

2 commits

30 Dec, 2016

2 commits

  • 45a68fe26   mmc: move some SDHCI related options to Kconfig ... Browse Code »

    While I moved the options, I also renamed them so that they are all
    prefixed with MMC_SDHCI_.

    This commit was created in the following steps.

    [1] Rename with the following command
    find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
    -type f -print | xargs sed -i -e '
    s/CONFIG_MMC_SDMA/CONFIG_MMC_SDHCI_SDMA/g
    s/CONFIG_BCM2835_SDHCI/CONFIG_MMC_SDHCI_BCM2835/g
    s/CONFIG_KONA_SDHCI/CONFIG_MMC_SDHCI_KONA/g
    s/CONFIG_MV_SDHCI/CONFIG_MMC_SDHCI_MV/g
    s/CONFIG_S5P_SDHCI/CONFIG_MMC_SDHCI_S5P/g
    s/CONFIG_SPEAR_SDHCI/CONFIG_MMC_SDHCI_SPEAR/g
    '

    [2] create the Kconfig entries in drivers/mmc/Kconfig

    [3] Move the options by the following command
    tools/moveconfig.py -y MMC_SDHCI_SDMA MMC_SDHCI_BCM2835 \
    MMC_SDHCI_KONA MMC_SDHCI_MV MMC_SDHCI_S5P MMC_SDHCI_SPEAR

    [4] Sort drivers/mmc/Makefile for readability

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Tom Rini
    Reviewed-by: Jaehoon Chung

    Masahiro Yamada
     
  • e1ce61fbb   mmc: move CONFIG_SDHCI to Kconfig, renaming to CONFIG_MMC_SDHCI ... Browse Code »

    Move CONFIG_SDHCI to Kconfig and rename it to CONFIG_MMC_SDHCI.
    My motivation for the rename is, ultimately, to make all the MMC
    options prefixed with MMC_ and SDHCI options with MMC_SDHCI_,
    like Linux.

    This commit was created as follows:

    [1] Rename the config option with the following command:
    find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
    -type f -print | xargs sed -i -e 's/CONFIG_SDHCI/CONFIG_MMC_SDHCI/g'

    [2] create the entry for MMC_SDHCI in drivers/mmc/Kconfig

    [3] run "tools/moveconfig.py -y MMC_SDHCI"

    [4] add "depends on MMC_SDHCI" to existing SDHCI driver entries

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Tom Rini
    Reviewed-by: Jaehoon Chung

    Masahiro Yamada
     

12 Oct, 2016

2 commits

10 Sep, 2016

1 commit

21 Aug, 2016

1 commit

25 Jun, 2016

2 commits

13 Jun, 2016

1 commit