21 Oct, 2017
1 commit
-
We add the various SMC91XX symbols to drivers/net/Kconfig and then this
converts the following to Kconfig:
CONFIG_SMC911X
CONFIG_SMC911X_BASE
CONFIG_SMC911X_16_BIT
CONFIG_SMC911X_32_BITSigned-off-by: Adam Ford
[trini: Apply to the rest of the tree, re-squash old and new patch]
Signed-off-by: Tom Rini
12 Aug, 2017
3 commits
-
This converts the following to Kconfig:
CONFIG_CMD_SPL_WRITE_SIZESigned-off-by: Simon Glass
Reviewed-by: Bin Meng
Reviewed-by: Philipp Tomsich -
This converts the following to Kconfig:
CONFIG_CMD_SPL_NAND_OFSSigned-off-by: Simon Glass
Reviewed-by: Bin Meng
Reviewed-by: Philipp Tomsich -
This converts the following to Kconfig:
CONFIG_CMD_SPLNote that trats does not actually use SPL, so this option can no-longer be
set.Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
Reviewed-by: Philipp Tomsich
22 May, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_SPL_BOARD_INITSigned-off-by: Ley Foon Tan
[trini: Update the Kconfig logic]
Signed-off-by: Tom Rini
15 May, 2017
1 commit
-
The symbols CONFIG_OMAP3_GPIO_X control if we enable the clocks for a
given GPIO bank in U-Boot. select the required banks for each target.
In some cases we need to also migrate from CONFIG_USB_EHCI (deprecated,
in include/configs/) to CONFIG_USB_EHCI_HCD as we only require the GPIO
bank to be enabled if USB is also enabled.Signed-off-by: Tom Rini
29 Jan, 2017
1 commit
-
With the latest mach-types values we have many instances where we no
longer need to define a value and a few cases where the name (but not
value) have changed slightly.Signed-off-by: Tom Rini
15 Oct, 2016
1 commit
-
Move SPL_OS_BOOT to Kconfig and cleanup existing
uses.Signed-off-by: Heiko Schocher
10 Jun, 2016
1 commit
-
move CONFIG_BOOTDELAY into a Kconfig option. Used for this
purpose the moveconfig.py tool in tools.Signed-off-by: Heiko Schocher
Reviewed-by: Tom Rini
Acked-by: Viresh Kumar
Acked-by: Igor Grinberg
13 Aug, 2015
1 commit
-
Add option to set shell prompt string from menuconfig and migrate
boards globally.The migration is done as follows:
- Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the
entry moved to their defconfig files.
- Boards that defined some kind of #ifdef logic which selects the
CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT
right before the #ifdef logic and were left alone.
- This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus
CONFIG_SYS_PROMPT was removed from all _common.h and _common.h
files. This results in a streamlined default value across platforms, and
includes the following files: spear-common, sunxi-common, mv-common,
ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common.
- Boards that relied on _common.h values of CONFIG_SYS_PROMPT were
not updated in their respective defconfig files under the assumption that
since they did not explicitly define a value, they're fine with whatever
the default is.
- On the other hand, boards that relied on a value defined in some
_common.h file such as woodburn_common, rpi-common,
bur_am335x_common, ls2085a_common, siemens_am33x_common, and
omap3_evm_common, had their values moved to the respective defconfig files.
- The define V_PROMPT was removed, since it is not used anywhere except for
assigning a value for CONFIG_SYS_PROMPT.Cc: Tom Rini
Cc: Masahiro Yamada
Cc: Stefano Babic
Cc: Igor Grinberg
Signed-off-by: Nikita Kiryanov
[trini: Add spring, sniper, smartweb to conversion]
Signed-off-by: Tom Rini
08 Jan, 2014
1 commit
-
Commit f33b9bd3984fb11e1d8566a866adc5957b1e1c9d breaks boards
which do not explicitly enable the gpio clocks. This causes
the twister spl to hang, since it uses the no longer enabled
gpio 55. Add CONFIG_OMAP3_GPIO_2 to unbrick the board.Cc: Stefano Babic
Cc: Tapani Utriainen
Signed-off-by: Jeroen Hofstee
Acked-by: Stefano Babic
24 Jul, 2013
1 commit
-
Signed-off-by: Wolfgang Denk
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini
02 Mar, 2013
1 commit
-
CONFIG_SPL_OS_BOOT_KEY is used only in board files. It is
not required to have a general CONFIG_ option. Rename it and
define it in board directory.Signed-off-by: Stefano Babic
Reviewed-by: Tom Rini
28 Mar, 2012
1 commit
-
Signed-off-by: Stefano Babic
CC: Tom Rini
CC: Wolfgang Denk
CC: Simon Schwarz
24 Dec, 2011
1 commit
-
The twister board is a development board using
the TAM3517 SOM.Support for NAND, 2 Ethernet (EMAC and SMC911),
USB (EHCI_OMAP).Signed-off-by: Stefano Babic
CC: Tapani Utrianen
CC: Tom Rini
CC: Sandeep Paulraj