05 Aug, 2015
1 commit
-
When U-Boot runs as an EFI application is does not have a definition of
CONFIG_SYS_TEXT_BASE. U-Boot is a relocatable application and the relocation
is done by EFI. U-Boot can be loaded at any address.Ensure that this CONFIG option is not set in this case.
Signed-off-by: Ben Stoltz
Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
28 Jul, 2015
1 commit
-
Move CONFIG_SYS_TEXT_BASE of ZynqMP_ep to its
respective defconfigSigned-off-by: Siva Durga Prasad Paladugu
Signed-off-by: Michal Simek
31 May, 2015
1 commit
-
Signed-off-by: Masahiro Yamada
30 Apr, 2015
1 commit
-
Currently all x86 boards still use CONFIG_SYS_EXTRA_OPTIONS to define
the text base address. Since it is deprecated, just remove it and use
CONFIG_SYS_TEXT_BASE directly.Signed-off-by: Bin Meng
Acked-by: Simon Glass
29 Mar, 2015
1 commit
-
make the CPU clock selectable via Kconfig
this removes the sunxi specific CONFIG_CLK_FULL_SPEED defined in each
soc header and replaces it's use in board/sunxi/board.c with
CONFIG_SYS_CLK_FREQ from Kconfig which allows us to configure board
specific frequency on bootSigned-off-by: Iain Paton
[hdegoede@redhat.com s/CONFIG_SYS_CLK_FREQ/CONFIG_TIMER_CLK_FREQ/ for the
arch-timer clk speed on sun7i to fix mis-compile on sun7i]
Acked-by: Hans de Goede
Signed-off-by: Hans de Goede
28 Mar, 2015
1 commit
-
This option has a bool type, not hex.
Fix it and enable it if CONFIG_DM is on because Driver Model always
requires malloc memory. Devices are scanned twice, before/after
relocation. CONFIG_SYS_MALLOC_F should be enabled to use malloc
memory before relocation. As it is board-independent, handle it
globally.Signed-off-by: Masahiro Yamada
Acked-by: Stephen Warren
Reviewed-by: Simon Glass
Acked-by: Robert Baldyga
09 Mar, 2015
1 commit
-
This commit introduces new config: CONFIG_SYS_MALLOC_CLEAR_ON_INIT.
This config is an expert option and is enabled by default.
The all amount of memory reserved for the malloc, is by default set
to zero in mem_malloc_init(). When the malloc reserved memory exceeds
few MiB, then the boot process can slow down.So disabling this config, is an expert option to reduce the boot time,
and can be disabled by Kconfig.Note:
After disable this option, only calloc() will return the pointer
to the zeroed memory area. Previously, without this option,
the memory pointed to untouched malloc memory region, was filled
with zeros. So it means, that code with malloc() calls should
be reexamined.Signed-off-by: Przemyslaw Marczak
Reviewed-by: Simon Glass
05 Mar, 2015
1 commit
-
At present SPL uses a single stack, either CONFIG_SPL_STACK or
CONFIG_SYS_INIT_SP_ADDR. Since some SPL features (such as MMC and
environment) require a lot of stack, some boards set CONFIG_SPL_STACK to
point into SDRAM. They then set up SDRAM very early, before board_init_f(),
so that the larger stack can be used.This is an abuse of lowlevel_init(). That function should only be used for
essential start-up code which cannot be delayed. An example of a valid use is
when only part of the SPL code is visible/executable, and the SoC must be set
up so that board_init_f() can be reached. It should not be used for SDRAM
init, console init, etc.Add a CONFIG_SPL_STACK_R option, which allows the stack to be moved to a new
address before board_init_r() is called in SPL.The expected SPL flow (for CONFIG_SPL_FRAMEWORK) is documented in the README.
Signed-off-by: Simon Glass
For version 1:
Acked-by: Albert ARIBAUD
Reviewed-by: Stefan Roese
Tested-by: Bo Shen
Acked-by: Bo Shen
Acked-by: Heiko Schocher
Tested-by: Heiko SchocherSigned-off-by: Tom Rini
26 Feb, 2015
2 commits
-
Currently only normal hashing is supported using hardware acceleration.
Added support for progressive hashing using hardware.Signed-off-by: Ruchika Gupta
Signed-off-by: Gaurav Rana
CC: Simon Glass
Reviewed-by: Simon Glass
Reviewed-by: York Sun
25 Feb, 2015
3 commits
-
Now CONFIG_SPL_BUILD is not defined in Kconfig, so
"!depends on SPL_BUILD" and "if !SPL_BUILD" are redundant.Signed-off-by: Masahiro Yamada
-
When Kconfig for U-boot was examined, one of the biggest issues was
how to support multiple images (Normal, SPL, TPL). There were
actually two options, "single .config" and "multiple .config".
After some discussions and thought experiments, I chose the latter,
i.e. to create ".config", "spl/.config", "tpl/.config" for Normal,
SPL, TPL, respectively.It is true that the "multiple .config" strategy provided us the
maximum flexibility and helped to avoid duplicating CONFIGs among
Normal, SPL, TPL, but I have noticed some fatal problems:[1] It is impossible to share CONFIG options across the images.
If you change the configuration of Main image, you often have to
adjust some SPL configurations correspondingly. Currently, we
cannot handle the dependencies between them. It means one of the
biggest advantages of Kconfig is lost.[2] It is too painful to change both ".config" and "spl/.config".
Sunxi guys started to work around this problem by creating a new
configuration target. Commit cbdd9a9737cc (sunxi: kconfig: Add
%_felconfig rule to enable FEL build of sunxi platforms.) added
"make *_felconfig" to enable CONFIG_SPL_FEL on both images.
Changing the configuration of multiple images in one command is a
generic demand. The current implementation cannot propose any
good solution about this.[3] Kconfig files are getting ugly and difficult to understand.
Commit b724bd7d6349 (dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to
Kconfig) has sprinkled "if !SPL_BUILD" over the Kconfig files.[4] The build system got more complicated than it should be.
To adjust Linux-originated Kconfig to U-Boot, the helper script
"scripts/multiconfig.sh" was introduced. Writing a complicated
text processor is a shell script sometimes caused problems.Now I believe the "single .config" will serve us better. With it,
all the problems above would go away. Instead, we will have to add
some CONFIG_SPL_* (and CONFIG_TPL_*) options such as CONFIG_SPL_DM,
but we will not have much. Anyway, this is what we do now in
scripts/Makefile.spl.I admit my mistake with my apology and this commit switches to the
single .config configuration.It is not so difficult to do that:
- Remove unnecessary processings from scripts/multiconfig.sh
This file will remain for a while to support the current defconfig
format. It will be removed after more cleanups are done.- Adjust some makefiles and Kconfigs
- Add some entries to include/config_uncmd_spl.h and the new file
scripts/Makefile.uncmd_spl. Some CONFIG options that are not
supported on SPL must be disabled because one .config is shared
between SPL and U-Boot proper going forward. I know this is not
a beautiful solution and I think we can do better, but let's see
how much we will have to describe them.- update doc/README.kconfig
More cleaning up patches will follow this.
Signed-off-by: Masahiro Yamada
Reviewed-by: Simon Glass -
At present defaults in arch-specific Kconfig files are ignored if the
top-level item comes ahead of it in include order. This means that it is
not possible to have a U-Boot default that architectures and boards can
override. This does not seem very useful.Move the include earlier to support this.
Signed-off-by: Simon Glass
Reported-by: Masahiro Yamada
Reviewed-by: Masahiro Yamada
13 Feb, 2015
3 commits
-
Move this option to Kconfig and update all boards.
Signed-off-by: Simon Glass -
Add a file to control driver model test features.
Signed-off-by: Simon Glass
Reviewed-by: Masahiro Yamada -
Discovered while experimenting with signature checking on vexpress
which doesn't typically use DM.
Acked-by: Simon Glass
09 Feb, 2015
1 commit
-
Following SPARK ARC now has SYS_MONITOR_BASE setup via Kconfig.
This makes "include/configs/*.h" cleaner and more flexible.Signed-off-by: Alexey Brodkin
30 Jan, 2015
1 commit
-
For FIT signature based approach to work, RSA library needs to be selected.
The FIT_SIGNATURE option in Kconfig is modified to automatically select RSA.
Selecting RSA compiles the RSA library required for image verification.Signed-off-by: Ruchika Gupta
CC: Simon Glass
Acked-by: Simon Glass
15 Jan, 2015
1 commit
-
It makes sense to specify CONFIG_SYS_CLK_FREQ in "configs/xx_defconfig"
instead of "include/configs/xxx.h" because then header will be reusable
across boards with different CPU clocks.Also this nice to have an ability for end user to tune this value
himself via "menuconfig".For now I'm only applying this change to all ARC configs because
otherwise scope of change will be huge.Signed-off-by: Alexey Brodkin
Cc: Tom Rini
Cc: Masahiro Yamada
Cc: Hans de Goede
cc: Simon Glass
Reviewed-by: Tom Rini
08 Jan, 2015
1 commit
-
Make it a sub-menu of "General setup" like Linux Kernel.
Signed-off-by: Masahiro Yamada
Cc: Tom Rini
25 Nov, 2014
1 commit
24 Nov, 2014
1 commit
-
For similar reasons to why the Linux Kernel has an EXPERT option, we too
want an option to allow for tweaking of some options that while normally
should remain hidden, may need to be changed in some cases.Signed-off-by: Tom Rini
Acked-by: Masahiro Yamada
Acked-by: Hans de Goede
Signed-off-by: Hans de Goede
23 Nov, 2014
1 commit
-
Signed-off-by: Masahiro Yamada
05 Nov, 2014
1 commit
-
Defining CONFIG_SYS_TEXT_BASE in config.mk is very old style.
Create CONFIG_SYS_TEXT_BASE option in Kconfig, but let it
depend on CONFIG_SPARC because we do not want to disturb
the other architectures that still define CONFIG_SYS_TEXT_BASE
in their header files.Signed-off-by: Masahiro Yamada
Cc: Daniel Hellstrom
28 Oct, 2014
2 commits
-
CONFIG_TPL should not be enabled for boards that do not have TPL.
CONFIG_SUPPORT_TPL introduced by this commit should be "select"ed
by boards with TPL support and CONFIG_TPL should depend on it.Signed-off-by: Masahiro Yamada
-
CONFIG_SPL should not be enabled for boards that do not have SPL.
CONFIG_SUPPORT_SPL introduced by this commit should be "select"ed
by boards with SPL support and CONFIG_SPL should depend on it.Signed-off-by: Masahiro Yamada
Acked-by: Simon Glass
25 Sep, 2014
2 commits
-
This commit moves:
CONFIG_OF_CONTROL
CONFIG_OF_SEPARATE
CONFIG_OF_EMBED
CONFIG_OF_HOSTFILEBecause these options are currently not supported for SPL,
the "Device Tree Control" menu does not appear in the SPL
configuration.Note:
zynq-common.h should be adjusted so as not to change the
default value of CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME.Signed-off-by: Masahiro Yamada
Acked-by: Simon Glass
Cc: Stephen Warren
Cc: Minkyu Kang
Acked-by: Michal Simek -
This would be useful to start moving various config options.
Signed-off-by: Masahiro Yamada
Acked-by: Simon Glass
Tested-by: Simon Glass
29 Aug, 2014
2 commits
-
Copy the Kconfig option from "init/Kconfig" of Linux v3.16 tag
and adjust the help document.Signed-off-by: Masahiro Yamada
-
Copy Kconfig options from "init/Kconfig" of Linux v3.16 tag
and adjust some parts of the help document.Move CONFIG_SPL, CONFIG_TPL, ... etc. to "Boot images" menu.
Signed-off-by: Masahiro Yamada
22 Aug, 2014
1 commit
-
CONFIG_DEFCONFIG_LIST specifies the default defconfig.
It is used by "make savedefconfig" when .config is missing.
But that's it. I could not find other useful cases.As a side effect, CONFIG_DEFCONFIG_LIST="configs/sandbox_defconfig"
is contained in .config of every target board, which some people
think is odd. So, let's remove it.Signed-off-by: Masahiro Yamada
Cc: Michal Simek
Acked-by: Michal Simek
30 Jul, 2014
1 commit
-
This commit adds more Kconfig files, which were written by hand.
Signed-off-by: Masahiro Yamada
Acked-by: Simon Glass